DIN EN 16484-2016 Leather - Requirements for the determination of the origin of leather production German version EN 16484 2015《皮革 皮革生产原产地的测定要求 德文版本EN 16484-2015》.pdf

《DIN EN 16484-2016 Leather - Requirements for the determination of the origin of leather production German version EN 16484 2015《皮革 皮革生产原产地的测定要求 德文版本EN 16484-2015》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 16484-2016 Leather - Requirements for the determination of the origin of leather production German version EN 16484 2015《皮革 皮革生产原产地的测定要求 德文版本EN 16484-2015》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、February 2016 English price group 8No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 59.140.30!%LS,“2414809www.din.de

2、DIN EN 16484Leather Requirements for the determination of the origin of leather production;English version EN 16484:2015,English translation of DIN EN 16484:2016-02Leder Anforderungen an die Bestimmung der Herkunft von Leder;Englische Fassung EN 16484:2015,Englische bersetzung von DIN EN 16484:2016-

3、02Cuir Exigences relatives la dtermination de lorigine de la production du cuir;Version anglaise EN 16484:2015,Traduction anglaise de DIN EN 16484:2016-02www.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.Document comprises

4、 12 pages 03.16 DIN EN 16484:2016-02 2 A comma is used as the decimal marker. National foreword This document (EN 16484:2015) has been prepared by Technical Committee CEN/TC 289 “Leather” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was DIN-Normenausschuss Mater

5、ialprfung (DIN Standards Committee Materials Testing), Working Committee NA 062-05-51 AA Anforderungen und physika-lische Prfverfahren fr Leder und seine Ausgangsprodukte. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16484 November 2015 ICS 59.140.30 English Version Leather - Requirements fo

6、r the determination of the origin of leather production Cuir - Exigences relatives la dtermination de lorigine de la production du cuir Leder - Anforderungen an die Bestimmung der Herkunft von Leder This European Standard was approved by CEN on 5 September 2015. CEN members are bound to comply with

7、the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Managem

8、ent Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same statu

9、s as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

10、 Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN A

11、ll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16484:2015 EEN 16484:2015 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Requirements for the determination of th

12、e origin of the leather production 6 4.1 General 6 4.2 Tanned leather (e.g. wet blue, wet white, vegetable tanned leather) 6 4.3 Crust (dyed or not) . 6 4.4 Finished leathers . 7 5 Records to verify the country of origin . 7 Annex A (informative) Items to be provided to determine the origin of the l

13、eather production . 8 A.1 General 8 A.2 Product identification . 8 A.3 Origin of the product 8 A.4 Sales and commercial documentation . 8 A.5 Marking and labelling 8 Bibliography . 10 DIN EN 16484:2016-02 EN 16484:2015 (E) 3 European foreword This document (EN 16484:2015) has been prepared by Techni

14、cal Committee CEN/TC 289 “Leather”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be withdrawn at the

15、latest by May 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national st

16、andards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

17、 Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16484:2016-02 EN 16484:2015 (E) 4 Introduction This standard has been prepared for defining the conditions for determining the origin of the leath

18、er production in conformity with the international Non-Preferential Rules of Origin and for fulfilling, where applicable, the requirements for supplying the declaration of the country of origin of the leather production. When the origin of the leather production is declared, it is essential to make

19、it certain that the statement is accurate. Therefore it needs to relate to objective and verifiable requirements. This standard applies to leather only. Leather articles, such as leather bags, leather goods, leather accessories, leather footwear, leather clothes or leather clothes accessories, leath

20、er upholstered furniture, etc. are subject to their own respective rules of origin. It is not possible to determine implicitly the origin of leather used (partially or totally) from the declared origin of leather articles. Conversely, the origin of the leather used does not automatically confer the

21、origin to the leather article. DIN EN 16484:2016-02 EN 16484:2015 (E) 5 1 Scope This European Standard defines the requirements that are necessary to confer the origin of leather production based on the principle of the last substantial transformation according to Non-Preferential Rules of Origin. T

22、his European Standard applies to leather only and it applies also to leather with hair. Furs are excluded. The country of origin of raw hides and skins isnt relevant for the application of this standard. 2 Normative references The following documents, in whole or in part, are normatively referenced

23、in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15987:2015, Leather Terminology Key definitions for the leather trade 3 Terms

24、 and definitions For the purposes of this document, the terms and definitions given in EN 15987:2015 and the following apply. 3.1 leather hide or skin with its original fibrous structure more or less intact, tanned to be imputrescible, where the hair or wool may or may not have been removed, whether

25、 or not the hide or skin has been split into layers or segmented either before or after tanning and where any surface coating or surface layer, however applied, is not thicker than 0,15 mm Note 1 to entry: If the tanned hide or skin is disintegrated mechanically and/or chemically into fibrous partic

26、les, small pieces or powders and then, with or without the combination of a binding agent, is made into sheets or other forms, such sheets or forms are not leather. Note 2 to entry: If the grain layer has been completely removed, the term leather will not be used without further qualification, e.g.

27、split leather, suede leather. SOURCE: EN 15987:2015, 4.1.1 3.2 raw hides or skins fresh, refrigerated, dried, dry-salted, salted hides or skins 3.3 tanned leather hides and skins converted to leather by a tanning process (see 3.5) 3.4 crust leather which is tanned, fatliquored and dried, before fini

28、shing SOURCE: EN 15987:2015, 4.1.3 DIN EN 16484:2016-02 EN 16484:2015 (E) 6 3.5 tanning processing of perishable raw hides and skins by the use of tanning materials into the permanent and imputrescible form of leather 3.6 retanning-dyeing-fatliquoring process that subjects an already tanned leather

29、to a further tanning treatment to modify its properties using an agent of the same, or entirely different, type, introducing oil into the leather by drumming it with an oil-in-water emulsion, and conferring to the leather the desired colour with the appropriate dyes 3.7 finishing broad series of sur

30、face treatments applied to leather to give it the desired look, feel or touch, such as applying pigmented or non-pigmented finishes and seasons or coatings, or simply shining the leather or removing the grain surface by buffing, etc 3.8 origin of the leather production country where the leather was

31、submitted to the last substantial transformation 3.9 substantial transformation process step in the production of leather of such relevance as to confer to it significantly different properties and thus capable of imprinting an origin 3.10 company producer of leather who wants to declare the origin

32、of the leather production 4 Requirements for the determination of the origin of the leather production 4.1 General In order to determine the origin of the leather production, the country where it has been submitted to the last substantial transformation needs to be ascertained. Consequently leather

33、at different stages of production can be considered coming from/produced in a given Country if they comply with the rules explained in 4.2, 4.3, 4.4. 4.2 Tanned leather (e.g. wet blue, wet white, vegetable tanned leather) Starting from raw hides/skins, the substantial transformation shall be the tan

34、ning phase. EXAMPLE The denomination will be “Tanned (or wet blue, wet white etc.) leather from Country A”. 4.3 Crust (dyed or not) The substantial transformation shall be the process step of “retanning-fatliquoring-(dyeing)”. EXAMPLE The denomination will be “Crust from Country A”. Crust from count

35、ry A, shall obtain the origin of the Country B only if it is additionally submitted to the process step of “retanning-fatliquoring-(dyeing)” in country B. DIN EN 16484:2016-02 EN 16484:2015 (E) 7 4.4 Finished leathers The origin of a finished leather shall be the country where “retanning-fatliquorin

36、g-dyeing” takes place. If the finishing takes place in a different country than the retanning- fatliquoring-dyeing, then it shall be indicated separately. 5 Records to verify the country of origin The origin of the leather shall be demonstrated and recorded. The geographic-origin shall be demonstrat

37、ed at least through objective documents of transaction or of production, which are capable to demonstrate where the substantial transformations have been carried out. This documentation shall not be replaced by a company self-declaration. DIN EN 16484:2016-02 EN 16484:2015 (E) 8 Annex A (informative

38、) Items to be provided to determine the origin of the leather production A.1 General In order to determine the origin of the leather production and to communicate it in a transparent way, the company should prepare the items described in A.2, A.3, A.4, A.5. A.2 Product identification The company sho

39、uld univocally identify and list the products of which it wants the origin to be declared, according to the requirements listed in Clause 4 (for example with a product code, the name of the article, etc.). A.3 Origin of the product The company should demonstrate the origin of the products according

40、to A.2, by keeping appropriate records of all the phases of substantial transformation according to the requirements stated in EN ISO 9001:2008, 7.5.3. Examples of appropriate registrations can be: documents of process control, production orders, working cards, documents of transport, all that is an

41、 input/output registration of the working defined as substantial for the origin declaration. A.4 Sales and commercial documentation In case the company wants to create sales and commercial documents of the leather whose origin declaration is intended (e.g. packing list, technical sheets, product she

42、ets), they should include the evidence of the origin of the production of the leather indication, on the basis of the items reported in A.2 and of the related destination. In any case the origin indication shall be referred only to the articles corresponding to the requirements of this standard. A.5

43、 Marking and labelling In case the company wants to mark or label its leathers, they shall be marked or labelled with the information reported in a), b), c), d), that shall be applied in a visible and durable way. If the product is sold outside the country of origin, apart other specifications, the

44、information reported in a), b), c) shall be provided at least in English: a) product identification, as reported in A.2; b) indication of origin, by qualifying the leather referring to the Country of the origin, according to the requirements reported in Clause 4, such as “German Leather”, “Leather f

45、rom Italy” or “Leather produced in Spain”, etc.; c) indication of the country where the finishing occurred when different from the country where retanning-fatliquoring dyeing have taken place; DIN EN 16484:2016-02 EN 16484:2015 (E) 9 d) the reference to this standard; e) name or mark of the company.

46、 The labelling/marking modalities that satisfy the requirements reported above, could be chosen by the company between one or more options, such as label put on packing material or point/label directly on the leather. In any case the origin indication shall refer only to the articles corresponding t

47、o the requirements of this standard. DIN EN 16484:2016-02 EN 16484:2015 (E) 10 Bibliography 1 International Glossary of Leather Terms 2 Leather Technical Dictionary, Eduard Roether Verlag Darmstadt 3 Council Regulation (EEC) No 2913/92 of 12 October 1992 establishing the Community Customs Code 4 Com

48、mission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code 5 Council Regulation (EC) No 1207/2001 of 11 June 2001 on procedures to facilitate the issue or the making out in the Community of proofs of origin and the issue of certain approved exporter authorisations under the provisions governing preferential trade between the European Community and certain countries 6 EN ISO 9001:2008, Quality management systems Requirements (ISO 9001:2008) DIN EN 16484:2016-02