DIN EN 16449-2014 Wood and wood-based products - Calculation of the biogenic carbon content of wood and conversion to carbon dioxide German version EN 16449 2014《木材和木基制品 木材和转化为二氧化碳.pdf

《DIN EN 16449-2014 Wood and wood-based products - Calculation of the biogenic carbon content of wood and conversion to carbon dioxide German version EN 16449 2014《木材和木基制品 木材和转化为二氧化碳.pdf》由会员分享，可在线阅读，更多相关《DIN EN 16449-2014 Wood and wood-based products - Calculation of the biogenic carbon content of wood and conversion to carbon dioxide German version EN 16449 2014《木材和木基制品 木材和转化为二氧化碳.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、June 2014 Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 79

2、.040!%2c“2156404www.din.deDDIN EN 16449Wood and wood-based products Calculation of the biogenic carbon content of wood and conversion tocarbon dioxide;English version EN 16449:2014,English translation of DIN EN 16449:2014-06Holz und Holzprodukte Berechnung des biogenen Kohlenstoffgehalts im Holz und

3、 Umrechnung inKohlenstoffdioxid;Englische Fassung EN 16449:2014,Englische bersetzung von DIN EN 16449:2014-06Produits en bois et drivs du bois Calcul du contenu en carbone biognique du bois et conversion en dioxyde de carbone;Version anglaise EN 16449:2014,Traduction anglaise de DIN EN 16449:2014-06

4、www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 10 pages 05.14 DIN EN 16449:2014-06 2 A comma is used as the decimal marker. National foreword This document (EN 16449:2014) has been prepared by Technical Committee CEN/TC 175 “Round and

5、sawn timber” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Holzwirtschaft und Mbel (Timber and Furniture Standards Committee), Working Committee NA 042-01-14 AA Rund- und Schnittholz SpA zu CEN/TC 175 und ISO/TC 218. EUROPEAN STANDARD N

6、ORME EUROPENNE EUROPISCHE NORM EN 16449 March 2014 ICS 79.040 English Version Wood and wood-based products - Calculation of the biogenic carbon content of wood and conversion to carbon dioxide Produits en bois et drivs du bois - Calcul du contenu en carbone biognique du bois et conversion en dioxyde

7、 de carbone Holz und Holzprodukte - Berechnung des biogenen Kohlenstoffgehalts im Holz und Umrechnung in Kohlenstoffdioxid This European Standard was approved by CEN on 20 December 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for givi

8、ng this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three offi

9、cial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of

10、 Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

11、Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide fo

12、r CEN national Members. Ref. No. EN 16449:2014 EEN 16449:2014 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 Wood the basic material 5 5 Calculating carbon dioxide based on biogenic carbon content .5 Annex A (informative) Formula (1), C

13、alculation example7 Bibliography 8 DIN EN 16449:2014-06 EN 16449:2014(E)3 Foreword This document (EN 16449:2014) has been prepared by Technical Committee CEN/TC 175 “Round and sawm timber”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national stan

14、dard, either by publication of an identical text or by endorsement, at the latest by September 2014, and conflicting national standards shall be withdrawn at the latest by September 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent ri

15、ghts. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,

16、 Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the U

17、nited Kingdom. DIN EN 16449:2014-06 EN 16449:2014 (E) 4 Introduction By the process of photosynthesis, growing trees absorb (sequester) atmospheric carbon dioxide which is then, together with the release of some of the oxygen back into the atmosphere, incorporated, within the cambium, into the cells

18、 of the tree as both wood and bark. The absorbed carbon dioxide is effectively fixed in the wood as biogenic carbon. When using wood, that biogenic carbon is transferred to the product system. Wood products therefore constitute a pool (reservoir) of biogenic carbon for the duration of their service

19、lifetime as those products. At end-of-life, that carbon leaves the product system; in the case of use for energy generation the biogenic carbon is oxidized to carbon dioxide and released back into the atmosphere. This European Standard provides a calculation method to quantify the amount of atmosphe

20、ric carbon dioxide based on that biogenic carbon content. The information can also be used to estimate the potential benefits associated with carbon storage in wood and wood-based products; for example, by building designers in the early stages of the building design process. It also provides the ba

21、sis for that information as required by product category rules and the development of EPDs. EN 16485, Round and sawn timber - Environmental Product Declarations - Product category rules for wood and wood-based products for use in construction, addresses the aspects of wood and wood-based products as

22、 required for life-cycle assessment. This European Standard can also be used in the context of the work of other CEN committees, e.g. CEN/TC 112, CEN/TC 124, CEN/TC 350 and CEN/TC 411. DINEN 16449:2014-06EN 16449:2014 (E) 5 1 Scope This European Standard provides a calculation method to quantify the

23、 amount of atmospheric carbon dioxide based on the biogenic carbon content of wood. 2 Normative references Not applicable. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 moisture content mass of moisture in wood expressed as a percentage of

24、its oven-dry mass SOURCE: EN 844-4:1997 4 Wood the basic material Wood, depending on the tree species, comprises, in varying amounts, cellulose (40 % to 55 %), hemi-cellulose (12 % to 15 %), lignin (15 % to 30 %) and extractives (2 % to 15 %). From that it is determined that wood is, by weight, 50 %

25、 carbon. For the purpose of this European Standard, the value of the carbon fraction of woody biomass is taken as 0,5. The other main elemental constituents are oxygen (44 %) and hydrogen (6 %). Some species also contain small amounts of mineral deposits which are of no significance in this instance

26、. Trees and wood also contain moisture in various forms and in various amounts. Wood will generally be dried down to moisture contents commensurate with end use. The moisture content of some wood-based products will be commensurate with the manufacturing process. The amount of moisture in wood has a

27、 bearing on both size and density; as moisture is removed wood shrinks and density decreases. As the amount of absorbed carbon dioxide is being determined based on the given volume and density of wood and wood-based products being used, the moisture content of the wood at that time will also be requ

28、ired. NOTE EN 350-2, Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe, provides density values at 12 % moisture content for the listed species. 12 % is commonly used a

29、s the reference moisture content when determining the properties of wood; in the absence of more specific product details, 12 % moisture content and the density values as provided in EN 350-2 may be used as default values. 5 Calculating carbon dioxide based on biogenic carbon content The calculation

30、 is based on the atomic weights of carbon (12) and carbon dioxide (44). Based on the product biogenic carbon content and the volume of wood, density and moisture content the following formula shall be used: 244121100COVP cf= +(1) DINEN 16449:2014-06EN 16449:2014(E)6 where PCO2is the biogenic carbon

31、oxidized as carbon dioxide emission from the product system into the atmosphere (e.g. energy use at the end-of-life) (kg); cf is the carbon fraction of woody biomass (oven dry mass), 0,5 as the default value; is the moisture content of the product (e.g. 12 (%); is the density of woody biomass of the

32、 product at that moisture content (kg/m3); Vis the volume of the solid wood product at that moisture content (m3). For wood-based products, wood volume content V= VP x percentage of wood. VP is the gross volume of the wood-based product. A calculation example is provided in Annex A. DINEN 16449:2014

33、-06EN 16449:2014 (E) 7 Annex A (informative) Formula (1), Calculation example Consider 25 m3of European whitewood incorporated into a building as glulam or cross-laminated timber from EN 350-2 the density value of European whitewood at 12 % moisture content is 460 kg/m3. Using Formula (1), atmospher

34、ic carbon dioxide based on biogenic carbon content of, say, 95 % of the total volume by way of allowance for the glue content, amounts to 17 883 kg. 2244 460 25 0,950,5 17 883 kg CO12121100CO= =+P (A.1) In any situation, if the precise moisture content of the wood and wood products is uncertain, a h

35、igher moisture content for a given volume of wood will provide a more conservative estimation of carbon dioxide. For any project, estimation of the total amount of carbon dioxide is determined by quantifying the volume of wood of each species used in each wood and wood-based product in each applicat

36、ion and applying the above calculation in each case, (i.e. P1co2+ P2co2, etc.). DINEN 16449:2014-06EN 16449:2014 (E) 8 Bibliography 1 EN 350-2:1994, Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood s

37、pecies of importance in Europe 2 EN 844-4:1997, Round and sawn timber - Terminology - Part 4: Terms relating to moisture content 3 EN 16485, Round and sawn timber - Environmental Product Declarations - Product category rules for wood and wood-based products for use in construction DINEN 16449:2014-06