DIN EN 15821-2011 Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods German version EN 15821 2010《燃烧天然原木的混烧桑拿炉 要求和试验方法 德文版本EN 15821-2010》.pdf

《DIN EN 15821-2011 Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods German version EN 15821 2010《燃烧天然原木的混烧桑拿炉 要求和试验方法 德文版本EN 15821-2010》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 15821-2011 Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods German version EN 15821 2010《燃烧天然原木的混烧桑拿炉 要求和试验方法 德文版本EN 15821-2010》.pdf（57页珍藏版）》请在麦多课文档分享上搜索。

1、January 2011 Translation by DIN-Sprachendienst.English price group 21No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 97.100.10!$m,O“1740944www.din.deDDIN EN 15821Multi-firing sauna stoves fired by natural wood logs Requirements and test methodsEnglish translation of DIN EN 15821:2011-01Mehrfach befeuerbare Saunafen zur Verfeuerung von naturbelassenem Scheitholz Anforderungen und PrfverfahrenEnglische bersetzung

3、von DIN EN 15821:2011-01Poles de sauna allumage multiple bches de bois naturelles Exigences et mthodes dessaiTraduction anglaise de DIN EN 15821:2011-01See start of applicationwww.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.5701.11

4、 DIN EN 15821:2011-01 A comma is used as the decimal marker. Start of application The start of application of this standard is due to be 1 June 2011. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Bundes

5、anzeiger (German Federal Gazette) and from the date given therein. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 295 “Residential solid fuel burning appliances” (Secretariat: BSI, United Kingdom). The responsible German bo

6、dy involved in its preparation was the Normenausschuss Heiz-, Koch- und Wrmgert (Heating and Cooking Equipment Standards Committee). This standard specifies requirements and test methods relating to the safety of multi-firing sauna stoves fired by wood logs. 2 EUROPEAN STANDARD NORME EUROPENNE EUROP

7、ISCHE NORM EN 15821 September 2010 ICS 97.100.10 English Version Multi-firing sauna stoves fired by natural wood logs Requirements and test methods Poles de sauna allumage multiple bches de bois naturelles Exigences et mthodes dessai Mehrfach befeuerbare Saunafen zur Verfeuerung von naturbelassenem

8、Scheitholz Anforderungen und Prfverfahren This European Standard was approved by CEN on 7 August 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. U

9、p-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

10、under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, France, German

11、y, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Ma

12、nagement Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15821:2010: EEN 15821:2010 (E) 2 Contents Page Foreword . 41 Scope 52 Normative references . 53 Terms and definitions . 54 Requ

13、irements for materials, design and construction . 94.1 Production documentation 94.2 Construction 104.2.1 General construction 104.2.2 Cleaning of heating surfaces . 104.2.3 Flue spigot or socket 104.2.4 Ashpan and ash removal 104.2.5 Bottomgrate . 114.2.7 Control of flue gas 114.2.8 Firedoors and c

14、harging doors . 114.2.9 Flue bypass device . 124.2.10 Front firebars and/or deepening plate 125 Safety requirements 125.1 Temperature rise of the operating components 125.2 Temperature of adjacent combustible materials . 126 Performance requirements 126.1 Flue gas temperature 126.2 Carbon monoxide e

15、mission . 136.3 Efficiency . 136.4 Flue draught 136.5 Refuelling loads 136.6 Space heating output 137 Instructions 137.1 General . 137.2 Installation instructions 137.3 User operating instructions . 148 Evaluation of conformity 158.1 General . 158.2 Initial type testing 168.2.1 General . 168.2.2 Ini

16、tial type testing for appliance changes 178.3 Factory production control (FPC) . 198.3.1 General . 198.3.2 Raw materials and components 198.3.3 Control of inspection, measuring and test equipment . 198.3.4 Process control . 198.3.5 Product inspection, testing and evaluation . 198.3.6 Non conforming

17、products 218.3.7 Corrective and preventive action 218.3.8 Handling, storage, packaging, preservation and delivery 219 Marking. 21Annex A (normative) Test methods 22A.1 Test environment 22A.1.1 Sauna test room temperature 22DIN EN 15821:2011-01 EN 15821:2010 (E) 3 A.1.2 Ambient air temperature coming

18、 into the sauna test room . 22A.1.3 External sources . 22A.2 Test assembly . 22A.2.1 General . 22A.2.2 Sauna test room 23A.2.3 Measurement section . 23A.2.4 Connection of appliance to measurement section . 24A.3 Measurement equipment . 25A.4 Test procedures 25A.4.1 Appliance installation . 25A.4.2 F

19、uel load 25A.4.3 Fuelling and de-ashing the fire 26A.4.4 Flue gas losses . 26A.4.5 Combustible heat losses in the residue . 26A.4.6 Performance test at nominal heat output . 26A.4.7 Temperature safety test . 28A.5 Test results 29A.6 Calculation methods. 29A.6.1 Notations and units used . 29A.6.2 For

20、mulae 31A.7 Test report . 33Annex B (normative) Test fuels and recommended fuels 43B.1 General . 43B.2 Test fuel . 43B.2.1 Selection of test fuel . 43B.2.2 Storage, preparation and analysis 43Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Pr

21、oducts Directive . 46ZA.1 Scope and relevant characteristics 46ZA.2 Procedure for the attestation of conformity of multi-firing sauna stoves fired by natural wood logs 48ZA.3 CE marking and labelling . 50DIN EN 15821:2011-01 EN 15821:2010 (E) 4 Foreword This document (EN 15821:2010) has been prepare

22、d by Technical Committee CEN/TC 295 “Residential solid fuel burning appliances”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2011, and conflictin

23、g national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has

24、been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). For relationship with EC Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CEN

25、ELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuan

26、ia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 15821:2011-01 EN 15821:2010 (E) 5 1 Scope This European Standard covers multi-firing sauna stoves in which the heating stones are separated from and in

27、directly heated by the fire and the flue gases and which may be re-fuelled with several fuel loads. This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of multi-firing sauna stoves fired by wood logs and pr

28、ovides instructions for them. Furthermore, it also gives provisions for evaluation of conformity (i.e. initial type testing (ITT) and factory production control (FPC) and marking of these products. This standard is applicable to hand-fuelled intermittent burning multi-firing sauna stoves, which prov

29、ide heat into the space where they are installed. These multi-firing sauna stoves may be supplied either as an assembled appliance or as a manufacturers pre-designed unit consisting of pre-fabricated components designed to be built on site in accordance with the manufacturers specified assembly inst

30、ructions. One-off installations are not included. These multi-firing sauna stoves may burn only natural wood logs in accordance with the appliance operating instructions. Single-firing heat storage sauna stoves, in which the stones are directly heated by the fire and the flue gases, which pass throu

31、gh them, are not covered by this European Standard. This standard is also not applicable to mechanically fed sauna stoves, sauna stoves having fan assisted combustion air, sauna stoves fitted with a boiler, sauna stoves with incorporated flue or sauna stoves having any electrical connection. 2 Norma

32、tive references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 14774-1, Solid biofuels Determ

33、ination of moisture content Oven dry method Part 1: Total moisture Reference method EN 14775, Solid biofuels Determination of ash content EN 14918, Solid biofuels Determination of calorific value EN 15104, Solid biofuels Determination of total content of carbon, hydrogen and nitrogen Instrumental me

34、thods EN 15148, Solid biofuels Determination of the content of volatile matter EN 15289, Solid Biofuels Determination of total content of sulphur and chlorine EN 60335-2-53, Household and similar electrical appliances Safety Part 2-53: Particular requirements for sauna heating appliances (IEC 60335-

35、2-53:2002) EN ISO 9001:2008, Quality management systems Requirements (ISO 9001:2008) ISO 2859 (all parts), Sampling procedures for inspection by attributes 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. DIN EN 15821:2011-01 EN 15821:2010 (E) 6 3

36、.1 air grilles components in the inlet and outlet openings to distribute and direct convection air flow 3.2 air inlet control manual or automatic device which controls the quantity of air supplied for combustion 3.3 appliance family group of appliances of similar construction and/or performance char

37、acteristics where it is permissible to test only selected appliances in accordance with the requirements of this standard 3.4 ash content of the fuel solid matter remaining after the complete combustion of solid fuel 3.5 ashpan removable receptacle shaped to receive the residue falling from the fire

38、bed 3.6 ashpit enclosed chamber designed to receive the residue or the ashpan 3.7 ashpit loss part of the residue which is combustible 3.8 basic firebed quantity of glowing embers which ensures ignition of the test fuel to be charged NOTE The basic firebed may be specified in the operating instructi

39、ons. 3.9 batch charge proportion of the test load as declared in the operating manual that can be added at specified intervals during the test period of the burning rate performance test 3.10 bottomgrate part of the appliance at the base of the firebox which supports the firebed through which the re

40、sidue falls into the ashpan or ashpit and through which combustion air and/or combustion gases may be drawn 3.11 bottomgrate bars firebars bars supporting the fuelbed, separate or integral with a surrounding frame 3.12 charging door door which covers the refuelling opening 3.13 combustion air air su

41、pplied to the firebox which is entirely or partially used to burn the fuel 3.14 combustion gases compounds in gaseous form produced inside an appliance when fuel is burned DIN EN 15821:2011-01 EN 15821:2010 (E) 7 3.15 de-ashing process of clearing a fuelbed and discharging the residue into the colle

42、cting receptacle 3.16 de-ashing mechanism device to agitate or disturb the ash to facilitate its removal from the firebed NOTE It may also be used to change the bottomgrate operating position on some multi-firing sauna stoves. 3.17 draught regulator inlet device for admission of air downstream of th

43、e firebed, enabling the flue draught to be controlled 3.18 efficiency ratio of total heat output to the total heat input during the burning period expressed as a percentage 3.19 firebox combustion chamber part of the multi-firing sauna stove in which the fuel is burned 3.20 firebox opening aperture

44、in the firebox through which a multi-firing sauna stove may be fuelled 3.21 firedoor door through which the fire may be viewed and which may be opened to allow refuelling of the firebed 3.22 flue by-pass device device which in the open position allows flue gases to pass directly to the flue spigot/s

45、ocket NOTE This can be used as a preheating aid to overcome chimney condensation. 3.23 flue damper mechanism to change the flow of the combustion gases 3.24 flue draught differential between the static pressure in the place of installation and the static pressure at the flue gas measurement point 3.

46、25 flue gases gaseous compounds leaving the multi-firing sauna stove flue spigot or socket and entering the flue gas connector 3.26 flue gas connector duct through which flue gases are conveyed from the flue spigot of the multi-firing sauna stove into the chimney flue 3.27 flue gas mass flow mass of

47、 flue gas drawn off from the multi-firing sauna stove per unit of time DIN EN 15821:2011-01 EN 15821:2010 (E) 8 3.28 flue gas temperature temperature of the flue gas at the specified point in the measurement section 3.29 flue spigot flue socket integral part of the multi-firing sauna stove for connecting the flue gas connector thus permitting the deliberate escape of products of combustion into the chimney flue 3.30 flueway part of a multi-firing sauna stove designed to convey combustion gases fro