DIN EN 15798-2010 Products used for the treatment of swimming pool water - Filter media German version EN 15798 2010《游泳池水的处理用产品 过滤介质》.pdf

《DIN EN 15798-2010 Products used for the treatment of swimming pool water - Filter media German version EN 15798 2010《游泳池水的处理用产品 过滤介质》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 15798-2010 Products used for the treatment of swimming pool water - Filter media German version EN 15798 2010《游泳池水的处理用产品 过滤介质》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、May 2010 English price group 9No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 71.100.80!$bC“1633204www.din.deDDIN E

2、N 15798Products used for the treatment of swimming pool water Filter mediaEnglish translation of DIN EN 15798:2010-05Produkte zur Aufbereitung von Schwimm- und Badebeckenwasser FiltermaterialienEnglische bersetzung von DIN EN 15798:2010-05Produits utiliss pour le traitement de leau des piscines Mdia

3、s filtrantsTraduction anglaise de DIN EN 15798:2010-05www.beuth.deDocument comprises 14 pagesTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.04.10 A comma is used as the decimal marker. National foreword This standard has been prepar

4、ed by Technical Committee CEN/TC 164 “Water supply” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Wasserwesen (Water Practice Standards Committee), Working Committee NA 119-04-02 AA Wasseraufbereitung. Attention is drawn to the possibil

5、ity that some of the elements of this document may be the subject of patent rights. DIN shall not be held responsible for identifying any or all such patent rights. 2 DIN EN 15798:2010-05 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15798 January 2010 ICS 71.100.80 English Version Products u

6、sed for the treatment of swimming pool water Filter media Produits utiliss pour le traitement de leau des piscines Mdias filtrants Produkte zur Aufbereitung von Schwimm-und Badebeckenwasser Filtermaterialien This European Standard was approved by CEN on 28 November 2009. CEN members are bound to com

7、ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Manage

8、ment Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as th

9、e official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romani

10、a, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved wo

11、rldwide for CEN national Members. Ref. No. EN 15798:2010: EEN 15798:2010 (E) 2 Contents Foreword 3Introduction .41 Scope 52 Normative references 53 Description .54 Physical properties 55 Chemical properties 65.1 General 65.2 Impurities and main by-products .65.3 Water-extractable substances 65.4 Spe

12、cific properties.66 Test methods 67 Labelling - Transportation - Storage 67.1 Means of delivery .67.2 Risk and safety labelling according to the EU Directives .77.3 Transportation regulations and labelling 77.4 Marking .77.5 Storage 8Annex A (informative) General information on filter media .9A.1 Or

13、igin 9A.2 Properties .9A.3 Use 9A.4 Rules for safe handling and use . 10A.5 Emergency procedures 10Bibliography . 12Page DIN EN 15798:2010-05 EN 15798:2010 (E) 3 Foreword This document (EN 15798:2010) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which is hel

14、d by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2010, and conflicting national standards shall be withdrawn at the latest by July 2010. Attention is drawn to the possibility that

15、some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to i

16、mplement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,

17、 Switzerland and the United Kingdom. DIN EN 15798:2010-05 EN 15798:2010 (E) 4 Introduction In respect of potential adverse effects on the quality of swimming pool water, caused by the products covered by this European Standard: a) this European Standard provides no information as to whether the prod

18、ucts may be used without restriction in any of the Member States of the EU or EFTA; b) it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of these products remain in force. NOTE Conformity

19、with this document does not confer or imply acceptance or approval of the products in any of the Member States of the EU or EFTA. The use of the products covered by this document is subject to regulation or control by National Authorities. DIN EN 15798:2010-05 EN 15798:2010 (E) 5 1 Scope This Europe

20、an Standard is applicable to filter media (virgin granular activated carbon, silica sand and silica gravel, pumice, pyrolyized coal material, anthracite and calcium carbonate) used for treatment of swimming pool water. It describes the characteristics of filter media and specifies the requirements a

21、nd the corresponding test methods for filter media. It gives information on their use in swimming pool water treatment. This standard does not concern powdered diatomaceous earth, perilite, zeolite and similar materials used with filter cartridges. 2 Normative references The following referenced doc

22、ument is indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1018, Chemicals used for treatment of water intended for human consumption C

23、alcium carbonate EN 12485, Chemicals used for treatment of water intended for human consumption Calcium carbonate, high-calcium lime and half-burnt dolomite Test methods EN 12902, Products used for treatment of water intended for human consumption Inorganic supporting and filtering materials Methods

24、 of test EN 12904, Products used for treatment of water intended for human consumption Silica sand and silica gravel EN 12906, Products used for treatment of water intended for human consumption Pumice EN 12907, Products used for treatment of water intended for human consumption Pyrolyzed coal mater

25、ial EN 12909, Products used for treatment of water intended for human consumption Anthracite EN 12915-1, Products used for the treatment of water intended for human consumption Granular activated carbon Part 1: Virgin granular activated carbon 3 Description For the identification, the commercial for

26、m and the chemical properties see the relevant subclauses of EN 1018, EN 12904, EN 12906, EN 12907, EN 12909 and EN 12915-1. 4 Physical properties For the physical properties, the product shall conform to the requirements specified in the relevant subclauses of EN 12904, EN 12906, EN 12907, EN 12909

27、 and EN 12915-1. DIN EN 15798:2010-05 EN 15798:2010 (E) 6 5 Chemical properties 5.1 General This document specifies the minimum purity requirements for filter media used for the treatment of swimming pool water. Limits are given for impurities commonly present in the products. Depending on the raw m

28、aterial and the manufacturing process other impurities may be present and, if so, this shall be notified to the user and when necessary to relevant authorities. NOTE Users of the products should check national regulations in order to clarify whether it is of appropriate purity for treatment of swimm

29、ing pool water, taking into account water quality, required dosage, and contents of other impurities and additives used in the products not stated in the product document. Limits have been given for impurities and chemical parameters where these are likely to be present in significant quantities fro

30、m the current production process and raw materials. If the production process or raw materials lead to significant quantities of other impurities, by-products or additives being present, this shall be notified to the user. 5.2 Impurities and main by-products For virgin granular activated carbon the

31、content of ash, water and water-soluble material shall conform to the requirements specified in EN 12915-1. For calcium carbonate the impurities and main by-products shall conform to the requirements specified in EN 1018. 5.3 Water-extractable substances For virgin granular activated carbon and pyro

32、lyzed coal materials the level of water-extractable substances shall conform to the requirements specified in EN 12915-1 and EN 12907 respectively. NOTE Polycyclic Aromatic Hydrocarbons (PAH): the sum of the detected concentrations of fluoranthene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a

33、)pyrene, benzo(ghi)perylene, indeno(1,2,3-cd)pyrene. 5.4 Specific properties For virgin granular activated carbon the iodine number of the powdered activated carbon shall be not less than 600 mg/g. NOTE In certain applications lower values are acceptable. 6 Test methods The methods for sampling and

34、analysis are those specified in EN 12485, EN 12902 and EN 12915-1. 7 Labelling - Transportation - Storage 7.1 Means of delivery Virgin granular activated carbon shall be delivered in paper sacks (10 kg to 25 kg), semi-bulk containers (polypropylene bags, metal or cardboard drums, or corrugated boxes

35、 containing 200 kg to 800 kg), or in bulk (up to 50 m). DIN EN 15798:2010-05 EN 15798:2010 (E) 7 Pumice, silica sand, silica gravel, anthracite, pyrolyzed coal material and calcium carbonate shall be delivered in bags, semi-bulk containers, or bulk. In order that the purity of the product is not aff

36、ected, the means of delivery shall not have been used previously for any different product or it shall have been specially cleaned and prepared before use. 7.2 Risk and safety labelling according to the EU Directives1)Virgin granular activated carbon, pumice, silica sand, silica gravel, calcium carb

37、onate, anthracite and pyrolyzed coal material are not subject to labelling regulations at the date of the publication of this document. NOTE Annex I of the Directive 67/548/EEC on Classification, packaging and labelling of dangerous substances and its amendments and adaptations in the European Union

38、 contains a list of substances classified by the EU. Substances not in that Annex I should be classified on the basis of their intrinsic properties according to the criteria in the Directive by the person responsible for the marketing of the substance. 7.3 Transportation regulations and labelling St

39、eam virgin granular activated carbon, pumice, silica sand silica gravel, calcium carbonate, anthracite and pyrolyzed coal material are not dangerous substances at the date of the publication of this document. Chemically activated virgin granular carbon is listed as UN Number2)1362. RID3) ADR4): clas

40、s 4.2, classification code S2, packing group III. IMDG5): class 4.2. IATA6): Prohibited. 7.4 Marking The marking shall include the following : a) the name: 1) “virgin granular activated carbon “; or 2) “pumice“; or 3) “silica sand“; or 4) “silica gravel“; or 5) “calcium carbonate“; or 6) “anthracite

41、“; or 1) See Bibliography, 1.2) United Nations Number. 3) Regulations concerning International carriage of Dangerous goods by rail. 4) European Agreement concerning the international carriage of Dangerous goods by Road. 5) International Maritime transport of Dangerous Goods. 6) International Air Tra

42、nsport Association. 7) “pyrolyzed coal material“; DIN EN 15798:2010-05 EN 15798:2010 (E) 8 b) trade name, grade or particle size range; c) the net mass; d) the name and address of supplier and/or manufacturer; e) the statement “This product conforms to EN 15798“. 7.5 Storage 7.5.1 Long term stabilit

43、y Pumice, silica sand, silica gravel, anthracite and pyrolyzed coal material can be stored for an unlimited period of time. Calcium carbonate can be stored for unlimited period of time if kept dry. Virgin granular activated carbon is stable but hygroscopic. It can be stored for an unlimited time if

44、kept dry and away from volatile materials. 7.5.2 Storage incompatibilities Virgin granular activated carbon shall be kept away from oxidants (e.g. hydrogen peroxide, potassium permanganate, chlorates, nitrates), volatile solvents and moisture. NOTE Local regulations could apply to bulk storage (e.g.

45、 in silos). Calcium carbonate shall be kept away from acids. DIN EN 15798:2010-05 EN 15798:2010 (E) 9 Annex A (informative) General information on filter media A.1 Origin A.1.1 Raw materials Virgin granular activated carbon can be produced from virtually any carbonaceous material, e.g. coal, lignite

46、, peat, coconut shell and wood. Natural pumice, natural silica sand, silica gravel, natural anthracite coal, natural coal and natural limestone. A.1.2 Manufacturing process For activated carbon, the carbonaceous material is subjected to controlled oxidation during which a highly porous structure is

47、developed. The raw material is activated, thermally (most common) or chemically. Thermal activation involves heating to between 800 C and 1 100 C in the presence of an oxidizing gas (usually steam) under carefully controlled conditions for several hours. Chemical activation involves heating to betwe

48、en 400 C and 700 C in the presence of a dehydrating agent (e.g. phosphoric acid). After activation the material is cooled, then prepared, e.g. by pulverizing and sieving to extract the desired particle size, and packaged. Pumice, silica sand and silica gravel are produced by quarrying, dredging or crushing, cleaning, drying, and sieving. Calcium carbonate is manufactured by quarrying, crushing, cleaning and subsequent screenin