DIN EN 926-2-2015 Paragliding equipment - Paragliders - Part 2 Requirements and test methods for classifying flight safety characteristics German version EN 926-2 2013《滑翔降落伞设备 滑翔伞 .pdf

《DIN EN 926-2-2015 Paragliding equipment - Paragliders - Part 2 Requirements and test methods for classifying flight safety characteristics German version EN 926-2 2013《滑翔降落伞设备 滑翔伞 .pdf》由会员分享，可在线阅读，更多相关《DIN EN 926-2-2015 Paragliding equipment - Paragliders - Part 2 Requirements and test methods for classifying flight safety characteristics German version EN 926-2 2013《滑翔降落伞设备 滑翔伞 .pdf（53页珍藏版）》请在麦多课文档分享上搜索。

1、June 2015 Translation by DIN-Sprachendienst.English price group 21No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 9

2、7.220.40!%C;n“2322475www.din.deDDIN EN 926-2Paragliding equipment Paragliders Part 2: Requirements and test methods for classifying flight safetycharacteristics;English version EN 926-2:2013,English translation of DIN EN 926-2:2015-06Ausrstung fr das Gleitschirmfliegen Gleitschirme Teil 2: Anforderu

3、ngen und Prfverfahren zur Klassifizierung der sicherheitsrelevantenFlugeigenschaften;Englische Fassung EN 926-2:2013,Englische bersetzung von DIN EN 926-2:2015-06quipement pour le parapente Parapentes Partie 2: Exigences et mthodes dessai pour la classification des caractristiques descurit en vol;Ve

4、rsion anglaise EN 926-2:2013,Traduction anglaise de DIN EN 926-2:2015-06SupersedesDIN EN 926-2:2014-05www.beuth.deDocument comprises 53 pagesIn case of doubt, the German-language original shall be considered authoritative.05.15 DIN EN 926-2:2015-06 2 A comma is used as the decimal marker. Start of a

5、pplication The start of application of this standard is 2014-02-01. National foreword This document (EN 926-2:2013) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment”, Working Group WG 6 “Paragliding equipment” (Secretariat: DIN,

6、Germany). The responsible German body involved in its preparation was the DIN-Normenausschuss Sport- und Freizeitgert (DIN Standards Committee Sports Equipment), Working Committee NA 112-03-11 AA Gleitschirme. In Germany, paragliders are subject in full to the Luftverkehrsgesetz (LuftVG) (German Air

7、 Traffic Act) and to all regulations implementing this act. Compliance with airworthiness requirements shall be demonstrated in accordance with 11 of the Verordnung zur Prfung von Luftfahrtgert (LuftGerPV) (German Ordinance on Aircraft and Aeronautical Products). The airworthiness requirements to be

8、 met shall be those listed in 1 under number 7 Luftsportgerte of the 2.DV LuftGerPV (Second Regulation Implementing the Ordinance on Aircraft and Aeronautical Products). The present standard supplements the construction regulations by giving practical instructions for implementing these regulations.

9、 Amendments This standard differs from DIN EN 926-2:2005-06 as follows: a) the standard has been editorially revised; b) Clause 2 “Normative references” has been updated; c) Clause 3 “Terms and definitions” has been supplemented; d) Tables 1, 2, 9, 18, 19, 20, 21, 28 and 29 have been modified; e) Su

10、bclause 4.4.9 “Behaviour exiting a fully developed spiral dive” has been completely revised; f) Subclause 4.4.22 “Behaviour exiting a steep spiral” has been deleted; g) Subclause 4.4.24 “Folding lines” has been added; h) Subclause 5.2.1 “Test pilot equipment” has been extended to include further req

11、uirements; i) Subclause 5.3 “Test specimen” has been revised; j) Subclause 5.5.6 “Harness dimensions” has been revised; k) Subclause 5.5.11 “Maximum travel of the accelerator” has been deleted; DIN EN 926-2:2015-06 3 l) the former Subclause 5.5.19 “Details of test manoeuvres to be carried out” (now

12、Subclause 5.5.18) has been completely revised; m) Clause 6 “Test files” has been revised; n) Clause 7 “Users manual” has been revised; o) Clause 8 “Manufacturing record” has been revised; p) Clause 9 “Marking” has been revised; q) the test methods for asymmetric and symmetric collapse have been impr

13、oved; r) the test method for behaviour exiting a fully developed spiral dive has been updated; s) the Bibliography has been deleted. The following corrections have been made to the DIN EN 926-2:2014-02 edition: a) in the National foreword, paragraph 3 has been revised and paragraphs 4 and 5 have bee

14、n deleted; b) in Subclause 4.4.7 “Roll stability and damping”, the term Rollbewegungen has been replaced by Rollschwingungen (oscillations); c) in Subclause 4.4.8 “Stability in gentle spirals”, the term Aufrichttendenz has been replaced by Neigung, zum Geradeausflug zurckzukehren (Tendency to return

15、 to straight flight); d) in Subclause 4.4.9 “Behaviour exiting a fully developed spiral dive”, the term Aufrichttendenz has been replaced by Neigung, zum Geradeausflug zurckzukehren (Tendency to return to straight flight); e) in Subclause 4.4.14 “Asymmetric collapse”, the term ffnungsverhalten has b

16、een replaced by Wiederffnungsverhalten (Re-inflation behaviour); f) in Subclause 4.4.21 “Big ears in accelerated flight”, the words direkt nach (immediately after) have been added; g) in Subclause 4.4.23 “Any other flight procedure and/or configuration described in the users manual” the German text

17、has been harmonized with the English version; h) in Subclause 5.2.1 “Test pilot equipment”, the modal auxiliary verb muss has been replaced by sollte (should); i) in Subclause 5.3.2.2 “Marking of the control lines”, the modal auxiliary verb muss has been replaced by sollte (should); j) in Subclause

18、5.5.4 “Video documentation”, the reference has been corrected to read 5.5.18.1 to 5.5.18.23; k) in Subclause 5.5.8 “Sitting position”, the German text has been harmonized with the English version; l) in Subclause 5.5.18.4 “Control movement test”, 3rd paragraph, the term kontinuierlich has been repla

19、ced by gleichmig (gradually); m) in Subclause 5.5.18.7 “Roll stability and damping test”, the term Querlage has been replaced by Rollwinkel (roll angle); DIN EN 926-2:2015-06 4 n) in Subclause 5.5.18.8 “Stability in gentle spirals test”, the term Aufrichttendenz has been replaced by Neigung, zum Ger

20、adeausflug zurckzukehren (Tendency to return to straight flight); o) in Subclause 5.5.18.11 “Exiting deep stall (parachutal stall) test”, the expression bis zur Nullstellung (to the zero position) has been added and the term kontinuierlich has been replaced by gleichmig (gradually). Previous edition

21、s DIN V ENV 926-2: 1999-11 DIN EN 926-2: 2005-06, 2014-02, 2014-05 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 926-2 November 2013 ICS 97.220.40 Supersedes EN 926-2:2005English Version Paragliding equipment - Paragliders - Part 2: Requirements and test methods for classifying flight safety

22、characteristics quipement pour le parapente - Parapentes - Partie 2: Exigences et mthodes dessai pour la classification des caractristiques de scurit en vol Ausrstung fr das Gleitschirmfliegen - Gleitschirme -Teil 2: Anforderungen und Prfverfahren zur Klassifizierung der sicherheitsrelevanten Flugei

23、genschaften This European Standard was approved by CEN on 14 September 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibli

24、ographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respons

25、ibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Repub

26、lic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMAL

27、ISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 926-2:2013: EEN 926-2:2013 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Norm

28、ative references 4 3 Terms and definitions .4 4 Requirements .7 4.1 Paraglider classes .7 4.2 Classification of flight characteristics .8 4.3 Failure .8 4.4 Flight characteristics .8 5 Flight tests . 29 5.1 General . 29 5.2 Apparatus 29 5.3 Test specimen . 30 5.4 Test conditions . 32 5.5 Procedure 3

29、2 6 Test files 44 6.1 Test file information 44 6.2 Items accompanying the test files 44 7 Users manual 44 8 Manufacturing record . 46 9 Marking 47 Annex A (normative) Measuring suspension line lengths . 49 DIN EN 926-2:2015-06 EN 926-2:2013 (E) 3 Foreword This document (EN 926-2:2013) has been prepa

30、red by Technical Committee CEN/TC 136 “Sports, play-ground and other recreational facilities and equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest b

31、y May 2014, and conflicting national standards shall be withdrawn at the latest by May 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent r

32、ights. This document supersedes EN 926-2:2005. In comparison with the previous edition EN 926-2:2005, the following significant changes have been made: editorial revision; introduction of new definitions; modification of paragliders classification; update of marking; introduction of additional lines

33、 paragraph; harness dimensions have been modified; test methods for asymmetric and symmetric collapse have been improved; update of test method for behaviour exiting a fully developed spiral dive. This document is one of a series of standards on equipment for paragliding as follows: EN 926-1, Paragl

34、iding equipment Paragliders Part 1: Requirements and test methods for structural strength EN 926-2, Paragliding equipment Paragliders Part 2: Requirements and test methods for classifying flight safety characteristics EN 1651, Paragliding equipment Harnesses Safety requirements and strength tests EN

35、 12491, Paragliding equipment Emergency parachutes Safety requirements and test methods According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

36、 Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

37、 DIN EN 926-2:2015-06 EN 926-2:2013 (E) 4 1 Scope This European Standard specifies requirements and test methods for classifying the flight safety characteristics of paragliders in terms of the demands on pilot flying skills. This document is intended for the use of independent testing laboratories

38、qualified for flight testing paragliders. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of th

39、e referenced document (including any amendments) applies. EN 926-1, Paragliding equipment Paragliders Part 1: Requirements and test methods for structural strength EN 966, Helmets for airborne sports EN 1651, Paragliding equipment Harnesses Safety requirements and strength tests EN 12491, Paraglidin

40、g equipment Emergency parachutes Safety requirements and test methods 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 paraglider ultralight glider with no primary rigid structure, for which take-off and landing are on foot, with the pilot (an

41、d potentially one passenger) carried in a harness (or harnesses) connected to the wing 3.2 harness assembly composed of straps and fabric for supporting the pilot in the seated or semi-recumbent or standing position Note 1 to entry: The harness is attached to the wing via two rings or connectors; it

42、 can also be integral with the wing via risers. 3.3 emergency parachute emergency device intended to slow the descent of a paraglider pilot in the event of an incident in flight, which is deployed by the pilot by an intentional manual action Note 1 to entry: This may be unsteered or steerable. 3.4 c

43、ontrols primary steering and speed controls which are designated as such by the manufacturer 3.5 trimmer lockable pitch adjustment system Note 1 to entry: Action by the pilot is required to return it to the initial position. DIN EN 926-2:2015-06 EN 926-2:2013 (E) 5 3.6 accelerator secondary pitch co

44、ntrol mechanism generally operated by the feet, which automatically returns to the initial position when the action of the pilot stops 3.7 accelerator fully activated when the mechanical limits of the glider are reached and further action on the accelerator does not result in a further decrease of t

45、he angle of attack 3.8 action of the pilot any transfer of weight, action on the controls, the accelerator or on the trimmer 3.9 normal flight flight condition in which the paraglider is fully inflated and is following a trajectory close to straight flight (at a speed close to trim speed) without an

46、y action on the part of the pilot Note 1 to entry: A small number of cells may still be collapsed. 3.10 spiral dive flight condition in which the paraglider is fully inflated and is following a circling, steep, nose down trajectory with pitch angle of more than 70 and the angle of the span relative

47、to the horizontal between 0 and 40 as illustrated in Figure 1 DIN EN 926-2:2015-06 EN 926-2:2013 (E) 6 Key a angle of the span relative to the horizon b pitch angle Figure 1 Illustration of a spiral dive 3.11 spontaneous recovery when the paraglider returns to normal flight without any action on the

48、 part of the pilot DIN EN 926-2:2015-06 EN 926-2:2013 (E) 7 3.12 front collapse folding under of the leading edge such that the top surface is visible to the pilot Note 1 to entry: Deformation of the leading edge is not considered to be a front collapse. 3.13 cascade transition from one involuntary abnormal flight condition to another involuntary abnormal flight condition 3.14 minimum speed slowest airspeed maintainable without entering a deep stall or full s