DIN EN 899-2009 Chemicals used for treatment of water intended for human consumption - Sulfuric acid English version of DIN EN 899 2009-07《人类生活用水处理用化学品 硫酸 DIN EN 899 2009-07的英文版本》.pdf

《DIN EN 899-2009 Chemicals used for treatment of water intended for human consumption - Sulfuric acid English version of DIN EN 899 2009-07《人类生活用水处理用化学品 硫酸 DIN EN 899 2009-07的英文版本》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 899-2009 Chemicals used for treatment of water intended for human consumption - Sulfuric acid English version of DIN EN 899 2009-07《人类生活用水处理用化学品 硫酸 DIN EN 899 2009-07的英文版本》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、July 2009DEUTSCHE NORM English price group 11No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 71.100.80!$Xl“1537358www.

2、din.deDDIN EN 899Chemicals used for treatment of water intended for humanconsumption Sulfuric acidEnglish version of DIN EN 899:2009-07Produkte zur Aufbereitung von Wasser fr den menschlichen Gebrauch SchwefelsureEnglische Fassung DIN EN 899:2009-07SupersedesDIN EN 899:2003-09www.beuth.deDocument co

3、mprises 20 pagesDIN EN 899:2009-07 2 National foreword This standard has been prepared by Technical Committee CEN/TC 164 “Water supply” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Wasserwesen (Water Practice Standards Committee), Tech

4、nical Committee NA 119-04-02 AA Wasseraufbereitung. Users of this standard are advised of the reservations stated in the Introduction of the European Standard and should note that national regulations exist in Germany dealing with water for human consumption, in particular the Trinkwasserverordnung

5、(TrinkwV2001) (German Drinking Water Ordinance). The DIN Standards corresponding to the International Standards referred to in this document are as follows: EN ISO 3696 DIN ISO 3696 ISO 6332 DIN 38406-1 ISO 9174 DIN EN 1233 Amendments This standard differs from DIN EN 899:2003-09 as follows: a) Gene

6、ral purity criteria have been given in more detail. b) Specifications regarding risk and safety labelling as well as information on RID/ADR classification have been updated. Previous editions DIN 19618: 1984-06, 1969-05 DIN 19610: 1958-07 DIN EN 899: 1997-03, 2003-09 National Annex NA (informative)

7、Bibliography DIN 38406-1, German standard methods for the examination of water, waste water and sludge Cations (group E) Determination of iron (E 1) DIN EN 1233, Water quality Determination of chromium Atomic absorption spectrometric methods DIN ISO 3696, Water for analytical laboratory use Specific

8、ation and test methods Verordnung zur Novellierung der Trinkwasserverordnung (German Regulation amending the German Drinking Water Regulation), as of 21 May 2001, BGBl. (German Federal Law Gazette) I (2001), No. 24, pp. 959-9801)1)Registered in the DITR database of DIN Software GmbH, obtainable from

9、: Beuth Verlag GmbH, 10772 Berlin. EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 899March 2009ICS 71.100.80 Supersedes EN 899:2003 English VersionChemicals used for treatment of water intended for humanProduits chimiques utiliss pour le traitement de leaudestine la consommation humaine - Acide s

10、ulfurique menschlichen Gebrauch - SchwefelsureThis European Standard was approved by CEN on 8 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alterati

11、on. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translati

12、onunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greec

13、e, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Cen

14、tre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 899:2009: Econsumption - Sulfuric acidProdukte zur Aufbereitung von Wasser fr denEN 899:2009 (E) 2 Contents page Foreword 3Introduction . 41

15、Scope 52 Normative references 53 Description . 53.1 Identification . 53.2 Commercial forms . 63.3 Physical properties 63.4 Chemical properties 84 Purity criteria 84.1 General 84.2 Composition of commercial product . 84.3 Chemical parameters and indicator parameters 95 Test methods 95.1 Sampling . 95

16、.2 Analyses . 106 Labelling - Transportation - Storage 136.1 Means of delivery . 136.2 Risk and safety labelling according to the EU Directives 136.3 Transportation regulations and labelling 146.4 Marking . 156.5 Storage 15Annex A (informative) General information on sulfuric acid 16A.1 Origin 16A.2

17、 Use 16Annex B (normative) General rules relating to safety . 17B.1 Rules for safe handling and use 17B.2 Emergency procedures . 17Bibliography 18DIN EN 899:2009-07 EN 899:2009 (E) 3 Foreword This document (EN 899:2009) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretar

18、iat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is d

19、rawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 899:2003. Differences between this edition and EN 899:2003 are editorial

20、 to harmonize the text with other standards in this series. Annex A is informative; Annex B is normative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cypr

21、us, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 899:2009-07 EN 899:2009 (E) 4

22、Introduction In respect of potential adverse effects on the quality of water intended for human consumption, caused by the product covered by this standard: a) this standard provides no information as to whether the product may be used without restriction in any of Member States of the EU or EFTA; b

23、) it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of this product remain in force. NOTE Conformity with the standard does not confer or imply acceptance or approval of the product in any

24、 of the Member States of the EU or EFTA. The use of the product covered by this European Standard is subject to regulation or control by National Authorities. DIN EN 899:2009-07 EN 899:2009 (E) 5 1 Scope This European Standard is applicable to sulfuric acid used for treatment of water intended for h

25、uman consumption. It describes the characteristics of sulfuric acid and specifies the requirements and the corresponding test methods for sulfuric acid. It gives information on its use in water treatment. 2 Normative references The following referenced documents are indispensable for the application

26、 of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1483, Water quality Determination of mercury Method using atomic absorption spectrometry EN 26595, Water quality - Det

27、ermination of total arsenic Silver diethyldithiocarbamate spectrophotometric method (ISO 6595:1982) EN ISO 3696, Water for analytical laboratory use Specification and test methods (ISO 3696:1987) EN ISO 11885, Water quality determination of 33 elements by inductively coupled plasma atomic emission s

28、pectroscopy (ISO 11885:1996) ISO 910, Sulphuric acid and oleum for industrial use Determination of total acidity, and calculation of free sulphur trioxide content of oleum Titrimetric method ISO 3165, Sampling of chemical products for industrial use Safety in sampling ISO 3423, Sulphuric acid and ol

29、eums for industrial use Determination of sulphur dioxide content - Iodometric method ISO 6206, Chemical products for industrial use Sampling Vocabulary ISO 6332, Water quality Determination of iron Spectrometric method using 1,10-phenanthroline ISO 8288, Water quality Determination of cobalt, nickel

30、, copper, zinc, cadmium and lead Flame atomic absorption spectrometric methods ISO 9174, Water quality Determination of chromium Atomic absorption spectrometric methods ISO 9965, Water quality Determination of selenium Atomic absorption spectrometric method (hydride technique) 3 Description 3.1 Iden

31、tification 3.1.1 Chemical name Sulfuric acid. 3.1.2 Synonym or common name Oil of vitriol. DIN EN 899:2009-07 EN 899:2009 (E) 6 3.1.3 Relative molecular mass 98. 3.1.4 Empirical formula H2SO4. 3.1.5 Chemical formula H2SO4. 3.1.6 CAS Registry Number 1)7664-93-9. 3.1.7 EINECS reference 2)231-639-5. 3.

32、2 Commercial forms Sulfuric acid is available as aqueous solutions. NOTE For some water treatment applications, diluted acid can be used. 3.3 Physical properties 3.3.1 Appearance The product is clear or slightly turbid, colourless liquid. 3.3.2 Density 1,84 g/ml for sulfuric acid concentration of ma

33、ss fraction of 96 % at 20 C. 1,71 g/ml for sulfuric acid concentration of mass fraction of 78 % at 20 C. 1,18 g/ml for sulfuric acid concentration of mass fraction of 25 % at 20 C. 3.3.3 Solubility in water At all concentrations, the product is miscible with water. 1) Chemical Abstracts Service Regi

34、stry Number. 2) European Inventory of Existing Commercial Chemical Substances. DIN EN 899:2009-07 EN 899:2009 (E) 7 3.3.4 Vapour pressure Below 0,00001 kPa for sulfuric acid concentration of mass fraction of 96 % at 20 C. Below 0,1 kPa for sulfuric acid concentration of mass fraction of 78 % at 20 C

35、. Below 1,9 kPa for sulfuric acid concentration of mass fraction of 25 % at 20 C. 3.3.5 Boiling point at 100 kPa 3)+ 310 C for sulfphuric acid concentration of mass fraction of 96 %. Approximately + 200 C for sulfuric acid concentration of mass fraction of 78 %. + 106,5 C for sulfuric acid concentra

36、tion of mass fraction of 25 %. 3.3.6 Melting point + 5 C for sulfuric acid concentration of mass fraction of 98 %. - 10 C for sulfuric acid concentration of mass fraction of 96 %. - 11 C for sulfuric acid concentration of mass fraction of 78 %. - 22 C for sulfuric acid concentration of mass fraction

37、 of 25 %. 3.3.7 Specific heat 1,465 kJ/(kg.K) for sulfuric acid concentration of mass fraction of 96 % at 20 C. 3.3.8 Viscosity (dynamic) 22 mPa.s for sulfuric acid concentration of mass fraction of 96 % at 20 C. 16,7 mPa.s for sulfuric acid concentration of mass fraction of 78 % at 20 C. 3.3.9 Crit

38、ical temperature Not applicable. 3.3.10 Critical pressure Not applicable. 3.3.11 Physical hardness Not applicable. 3) 100 kPa = 1 bar. DIN EN 899:2009-07 EN 899:2009 (E) 8 3.4 Chemical properties Concentrated sulfuric acid reacts violently: with bases or with water (exothermic reaction); with reduci

39、ng agents due to oxidizing properties; with combustible materials due to oxidizing and dehydrating properties. The concentrated acid is a strong oxidizing agent and can cause ignition in contact with organic materials. Sulfuric acid (of sulfuric acid content less than a mass fraction of 70 % attacks

40、 most common metals, e.g. iron, zinc, liberating the flammable gas hydrogen. WARNING Mixing with water produces a marked temperature rise. Therefore ALWAYS ADD THE ACID TO THE WATER (NEVER THE REVERSE), slowly and agitating continuously. 4 Purity criteria 4.1 General This European Standard specifies

41、 the minimum purity requirements for sulfuric acid used for the treatment of water intended for human consumption. Limits are given for impurities commonly present in the product. Depending on the raw material and the manufacturing process other impurities may be present and, if so, this shall be no

42、tified to the user and, when necessary, to the relevant authorities. NOTE Users of this product should check the national regulations in order to clarify whether it is of appropriate purity for treatment of water intended for human consumption, taking into account raw water quality, contents of othe

43、r impurities and additives used in the products not stated in the product standard. Limits have been given for impurities and chemicals parameters where these are likely to be present in significant quantities from the current production process and raw materials. If the production process or raw ma

44、terials lead to significant quantities of impurities, by-products or additives being present, this shall be notified to the user. 4.2 Composition of commercial product The usual commercial concentrations of sulfuric acid available have a mass fraction of 96 % or 98 %. Other concentrations of sulfuri

45、c acid between a mass fraction of 25 % and 80 % are also available. If sold as concentrated acid, the mass fraction of sulfuric acid shall be in the range of 92 % to 98 %. The concentration of sulfuric acid shall be within a mass fraction of 1 % of the manufacturers declared value. DIN EN 899:2009-0

46、7 EN 899:2009 (E) 9 4.3 Chemical parameters and indicator parameters The product shall conform to the requirements specified in Table 1. Table 1 Chemical parameters and indicator parameters Parameter Limit of H2SO4 mg/kg Sulfur dioxide (SO2) max. 100 Iron (Fe) max. 100 Arsenic (As) max. 0,4 Cadmium

47、(Cd) max. 0,1 Chromium (Cr) max. 4 Mercury (Hg) max. 0,1 Nickel (Ni) max. 4 Lead (Pb) max. 4 Antimony (Sb) max. 1 Selenium (Se) max. 1 NOTE For chemical parameter values of trace metals in drinking water, see 1. 5 Test methods 5.1 Sampling 5.1.1 General Observe the recommendations of ISO 3165 and ta

48、ke account of ISO 6206. NOTE The sampling is carried out at the premises of the manufacturer of the concentrated sulfuric acid unless the customer has adequate facilities to carry out this operation safely at his own premises. 5.1.2 Sampling from drums and bottles 5.1.2.1 General 5.1.2.1.1 Mix the c

49、ontents of the container to be sampled by shaking the container, by rolling it or by rocking it from side to side, taking care not to damage the container or spill any of the liquid. 5.1.2.1.2 If the design of the container is such (for example, a narrow-necked bottle) that it is impracticable to use a sampling implement, take a sample by pouring after the contents have been thor