DIN EN 54-1-2011 Fire detection and fire alarm systems - Part 1 Introduction German version EN 54-1 2011《火灾探测和火灾警报系统 第1部分 介绍 德文版本EN 54-1-2010》.pdf

《DIN EN 54-1-2011 Fire detection and fire alarm systems - Part 1 Introduction German version EN 54-1 2011《火灾探测和火灾警报系统 第1部分 介绍 德文版本EN 54-1-2010》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 54-1-2011 Fire detection and fire alarm systems - Part 1 Introduction German version EN 54-1 2011《火灾探测和火灾警报系统 第1部分 介绍 德文版本EN 54-1-2010》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、June 2011 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 1

2、3.220.20!$s)i“1800670www.din.deDDIN EN 54-1Fire detection and fire alarm systems Part 1: IntroductionEnglish translation of DIN EN 54-1:2011-06Brandmeldeanlagen Teil 1: EinleitungEnglische bersetzung von DIN EN 54-1:2011-06Systmes de dtection et dalarme incendie Partie 1: IntroductionTraduction angl

3、aise de DIN EN 54-1:2011-06SupersedesDIN EN 54-1:1996-10www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 0 pages0 .1152DIN EN 54-1:2011-06 A comma is used as the decimal marker. National foreword This standard has been prepared by Techni

4、cal Committee CEN/TC 72 “Fire detection and fire alarm systems” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Feuerwehrwesen (Fire-fighting and Fire Protection Standards Committee), Working Committee NA 031-02-01 AA Brandmelde- un

5、d Feueralarmanlagen. Amendments This standard differs from DIN EN 54-1:1996-10 as follows: a) the standard has been extended to cover new parts of the EN 54 series; b) Figure 1 has been revised (introduction of functionalities); c) the standard has been editorially revised. Previous editions DIN EN

6、54-1: 1977-04, 1996-10 National Annex NA (informative) Alphabetical index of German terms (Translators note. The National Annex NA to the German version of DIN EN 54-1 contains an alphabetical list of the German terms as given in Clause 3 “Terms, definitions and abbreviations”.) 2 EUROPEAN STANDARD

7、NORME EUROPENNE EUROPISCHE NORM EN 54-1March 2011 ICS 13.220.20 Supersedes EN 54-1:1996English Version Fire detection and fire alarm systems - Part 1: Introduction Systmes de dtection et dalarme incendie - Partie 1: Introduction Brandmeldeanlagen - Teil 1: Einleitung This European Standard was appro

8、ved by CEN on 19 February 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationa

9、l standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language

10、 and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

11、 Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels

12、2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 54-1:2011: EEN 54-1:2011 (E) 2 Contents Page Foreword 3Introduction .51 Scope 62 General 62.1 Standardization series 62.2 General principles63 Terms, definitions and abbreviation

13、s 73.1 Terms and definitions .73.2 Abbreviations 144 Functions . 145 Compliance 16Annex A (informative) Functions, examples and relevant standards . 17DIN EN 54-1:2011-06 EN 54-1:2011 (E) 3 Foreword This document (EN 54-1:2011) has been prepared by Technical Committee CEN/TC 72 “Fire detection and f

14、ire alarm systems”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2011, and conflicting national standards shall be withdrawn at the latest by

15、September 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 54-1:1996. This edition incorporates the f

16、ollowing main changes made with respect to the previous edition of EN 54-1:1996 as follows: a) extension to cover new parts of the EN 54 series, b) revised approach of Figure 1: introduction of functionalities. EN 54, Fire detection and fire alarm systems, consists of the following parts: Part 1: In

17、troduction Part 2: Control and indicating equipment Part 3: Fire alarm devices Sounders Part 4: Power supply equipment Part 5: Heat detectors Point detectors Part 7: Smoke detectors Point detectors using scattered light, transmitted light or ionization Part 10: Flame detectors Point detectors Part 1

18、1: Manual call points Part 12: Smoke detectors Line detectors using an optical light beam Part 13: Compatibility assessment of system components Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance (CEN/TS 54-14) Part 16: Voice alarm control and indicating equip

19、ment Part 17: Short-circuit isolators Part 18: Input/output devices DIN EN 54-1:2011-06 EN 54-1:2011 (E) 4 Part 20: Aspirating smoke detectors Part 21: Alarm transmission and fault warning routine equipment Part 22: Resettable line type heat detectors Part 23 Fire alarm devices Visual alarm devices

20、Part 24: Components of voice alarm systems Loudspeakers Part 25: Components using radio links Part 26: Point fire detectors using carbon monoxide sensors Part 27: Duct smoke detectors Part 28: Non-resettable line type heat detectors Part 29: Multi-sensor fire detectors Point detectors using a combin

21、ation of smoke and heat sensors Part 30: Multi-sensor fire detectors Point detectors using a combination of carbon monoxide and heat sensors Part 31: Multi-sensor fire detectors Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors Part 32: Guidelines for the plan

22、ning, design, installation, commissioning, use and maintenance of voice alarm systems NOTE This list includes standards that are in preparation and other standards may be added. For current status of published standards refer to www.cen.eu. According to the CEN/CENELEC Internal Regulations, the nati

23、onal standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

24、 Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 54-1:2011-06 EN 54-1:2011 (E) 5 Introduction This European Standard gives the necessary information for the intended use of the series of EN 54 standards. The EN 54 series applies to fir

25、e detection and fire alarm systems in and around buildings composed of several components that communicate for the purpose of detecting fire at the earliest practicable moment, and to provide: local and/or remote fire alarms to organizations having authority to take care of buildings and their envir

26、onment; signals to initiate, in the event of a fire, the operation of other fire protection and equipment/systems. The EN 54 series may be used for other applications e.g. mines and ships, but one should consider the specific nature of each application before use. Additional performance and environm

27、ental tests may be necessary. This does not preclude the manufacture or use of systems having special characteristics suitable for the protection of specific risks against specific hazards. As this revision of the standard includes terms and definitions collated from specific parts of EN 54, there m

28、ay now be some duplication of terms and definitions in other parts. This situation will be corrected in future revisions of the different parts of EN 54 so that definitions are defined only once and are applied consistently throughout the series. DIN EN 54-1:2011-06 EN 54-1:2011 (E) 6 1 Scope This p

29、art of EN 54 defines the terms and definitions that are used throughout EN 54. It gives the principles on which each part of the standard has been based and describes the functions carried out by the components of a fire detection and fire alarm system. This European Standard applies to fire detecti

30、on and fire alarm systems in and around buildings. This European Standard does not apply to smoke alarm devices which are covered by EN 14604. 2 General 2.1 Standardization series EN 54 specifies: requirements, test methods and performance criteria against which the effectiveness and reliability of

31、the component parts of fire detection and fire alarm systems can be assessed; requirements and test methods against which the ability of components to be combined into an effective system can be assessed; guidelines for the incorporation and use of fire detection and fire alarm systems into building

32、s or other construction works. 2.2 General principles The function of a fire detection and fire alarm system is: to detect fire at the earliest practicable moment, and to give signals and indications so that appropriate action can be taken; to give audible and/or visible signals to the occupants of

33、the building who may be at risk from a fire. The functions of a fire detection and fire alarm system may be grouped to form subsystems such as a fire detection subsystem and a voice alarm subsystem. As the system is required to function satisfactorily, not only under fire conditions, but also when e

34、xposed to conditions likely to be met in practice, the tests specified in the EN 54 series are intended to assess the performance of the components and the system under such conditions. The performance of components is assessed from the results obtained in the specified tests and from their ability

35、to perform the required functions. This standard is not intended to place restrictions on the design or construction of components other than those necessary for the performance of desired functions. The compliance of a component with the relevant part of EN 54 does not ensure that this component wi

36、ll necessarily function correctly when connected with another component also conforming to the relevant part of EN 54 (e.g. control and indicating equipment with a fire detector), unless both components have been assessed together as conforming to the requirements for a system. DIN EN 54-1:2011-06 E

37、N 54-1:2011 (E) 7 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. NOTE 1 The list of components of fire detection and fire alarm systems is not intended to be exclusive. NOTE 2 Definitions for other compon

38、ents may be added in later revisions of this European Standard or by amendment when such components are produced. NOTE 3 Additional definitions specific to individual parts are included in those parts. 3.1.1 fire alarm and fault warning transmission system system used for routing fire alarm and faul

39、t warning signals from fire detection and alarm systems in buildings to fire alarm and/or fault warning receiving centres NOTE Alarm and fault transmission system comprises fire alarm routing equipment, fault warning routing equipment, receiving equipment and a communication network. 3.1.2 ancillary

40、 equipment equipment which support fire related functions not currently defined in EN 54 3.1.3 aspirating smoke detector smoke detector, in which air and aerosols are drawn through a sampling device and carried to one or more smoke sensing elements by an integral aspirator (e.g. fan or pump) NOTE Ea

41、ch smoke-sensing element may contain more than one sensor exposed to the same smoke sample. 3.1.4 building management system facilities used to monitor, control and manage equipment installed in a building for comfort, safety and/or security purposes 3.1.5 combustion gas detector fire detector sensi

42、tive to gaseous products of combustion and/or thermal decomposition EXAMPLE Carbon monoxide fire detector. 3.1.6 commissioning process by which it is verified that the installed system meets the defined requirements 3.1.7 compatibility ability of a component of the system to operate with another com

43、ponent of the same system 3.1.8 component device contained in one housing performing at least one, or part, of a function of a fire detection and fire alarm system EXAMPLE Fire detectors, alarm devices and control and indicating equipment are components of a fire detection and fire alarm system. NOT

44、E Where a function is distributed in separate housings each housing is considered as a separate component. DIN EN 54-1:2011-06 EN 54-1:2011 (E) 8 3.1.9 CIE (control and indicating equipment) component of a fire detection and fire alarm system through which other components may be supplied with power

45、 and which: a) is used: 1) to receive the signals from the connected detectors and/or manual call points; 2) to determine whether these signals correspond to a fire alarm condition; 3) to indicate any such fire alarm condition audibly and visually; 4) to indicate the location of the danger; b) is us

46、ed to monitor correct functioning of the system and give audible and visible warning of any faults (e.g. short circuit, line breakage, or fault in the power supply); and, if necessary is able to pass on the fault warning through fault warning routing equipment to a fault warning receiving centre; c)

47、 if necessary, is able to pass on the fire alarm signal; for example: to audible or visible fire alarm devices or to a voice alarm system; to the fire alarm routing function to a fire alarm receiving centre; to the control function for fire protection equipment or systems; to fire brigade panel; to

48、other systems or equipment not covered by EN 54 EXAMPLE Visualization equipment, such as a mimic panel. 3.1.10 control for fire protection equipment or system device used to actuate fire protection equipment or fire protection systems after receiving a signal from the control and indicating equipmen

49、t 3.1.11 detachable detector detector which is designed for removal of the head from its base NOTE The use of detachable detectors can assist during maintenance without disconnecting the fixed wiring. 3.1.12 duct smoke detector smoke detector that monitors the air in a duct 3.1.13 fault warning receiving centre centre from which the necessary corrective measures can be initiated on receipt of fault signals 3.1.14 fault warning routing equipment equip