DIN EN 509-2000 Decorative fuel-effect gas appliances German version EN 509 1999《装饰性节能燃气灶》.pdf

《DIN EN 509-2000 Decorative fuel-effect gas appliances German version EN 509 1999《装饰性节能燃气灶》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 509-2000 Decorative fuel-effect gas appliances German version EN 509 1999《装饰性节能燃气灶》.pdf（116页珍藏版）》请在麦多课文档分享上搜索。

1、DEUTSCHE NORM February 2000 Decorative fuel-effect gas appliances English version of DIN EN 509 I DIN - I EN509 ICs 97.1 00.20 Dekorative Gasgerte mit Brennstoffeffekt European Standard EN 509 : 1999 has the status of a DIN Standard. A comma is used as the decimal marker. This standard has been incl

2、uded in the body of Codes of practice for gas issued by the DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (German Association of Gas and Water Engineers). This standard includes safety requirements within the meaning of the Gerfesicherheifsgesefz (German Equipment Safety Law). National forewo

3、rd This standard has been prepared by CEN/TC 62. The responsible German body involved in its preparation was the Normenausschuss Heiz-, Koch- und Wrmegert (FNH Technology Standards Committee). DIN IS0 228-1 is the standard corresponding to International Standard IS0 228-1 referred to in clause 2 of

4、the EN. EN comprises 114 pages. No part of this standard may be reproduced without the prior permission of Ref. No. DIN EN 509 : 2000-0: N Deutsches lnstifut fr Normung e. V., Berlin. Beufb Verlag GmbH, 10772 Berlin, Germany, IS the exclusive right of sale for German Standards (DIN-Normen). English

5、price group 2 1 Sales No. 11 2 1 07.00 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 509 November 1999 ICs 91.140.20 English version Decorative fuel-effect gas appliances Appareils effet dcoratif de com- bustion utilisant les combustibles gazeux Dekorative Gasgerte mit Brennstoffeff ekt This

6、European Standard was approved by CEN on 1998-1 1-08. CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references co

7、ncerning such national stand- ards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its

8、own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal,

9、 Spain, Sweden, Switzerland, and the United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels O 1999. CEN - All rights of exploitation in any form and by any means reserved worldw

10、ide for CEN national members. Ref. No. EN 509 : 1999 E Page 2 EN 509 : 1999 Contents Page Foreword 4 1 2 3 3.1 3.2 3.3 3.4 3.5 3.6 4 4.1 4.2 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 Scope 5 Normative references 5 Definitions Decorative fuel effect gas applianc

11、es Gases Appliance construction Adjusters and controls Appliance performance Marking of the appliance and packaging 7 7 7 9 12 13 14 Classification of appliances 15 Classification according to the nature of gases used (categories) 15 Classification according to the method of evacuation of the produc

12、ts of combustion 18 Constructional requirements General Adjusting, control and safety devices Ignition devices Flame supervision systems Ignition burner or start-gas flame establishment Main flame establishment Burners Clocks and timing devices Gas pressure test points Operational requirements Gener

13、al Soundness of the gas circuit and correct evacuation of combustion products Heat inputs Temperature of various parts of the appliance and its surroundings Ignition, cross-lighting and flame stability Pressure governors Combustion Sooting Atmosphere sensing device Flame supervision device 19 19 24

14、29 30 30 31 32 32 32 32 32 33 33 34 35 36 36 36 37 37 Page 3 EN 509 : 1999 7 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 7.10 Test methods General Soundness of the gas circuit and correct evacuation of combustion products Heat inputs Temperature of various parts of the appliance and its surroundings Ignitio

15、n: cross-lighting and flame stability Pressure governors Combustion Sooting Atmosphere sensing device Flame supervision device 8 Marking and instructions 8.1 Marking 8.2 Instructions 38 38 46 47 51 52 56 57 60 62 63 65 65 69 Annex A (informative) National situations 85 Annex B (informative) Equivale

16、nce rules 97 Annex C (normative) Additional and amended requirements for decorative fuel effect gas appliances not exceeding a net heat input of 20 kW designed to be installed under a non- combustible canopy 100 Annex D (normative) High voltage ignition circuits 107 Annex E (informative) Means of id

17、entification of the types of gas in force in the various countries 109 Annex F (normative) Special national conditions 110 Annex G (informative) A - deviations 111 Annex H (informative) Bibliography 111 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or pro

18、visions of EU Directives. 112 Page 4 EN 509 : 1999 Foreword This European Standard has been prepared by Technical Committee CENRC 62 “Independent gas-fired space heaters“, the secretariat of which is held by BSI This European Standard shall be given the status of a national standard, either by publi

19、cation of an identical text or by endorsement, at the latest by May 2000, and conflicting national standards shall be withdrawn at the latest by May 2000. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and sup

20、ports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this standard. According to the CENLENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this

21、European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Page 5 EN 509 : 1999 1 Scope This European Standard specifies the requirements and te

22、st methods for the construction, safety, and marking of decorative fuel effect gas appliances not exceeding a nominal heat input of 20 kW, (based on the net calorific value), thereafter referred to as appliances. This standard is applicable to appliances that are designed to simulate a solid fuel fi

23、re and incorporate a natural draught burner with or without an ignition burner. The appliances are for decorative purposes only and are not heating appliances. This standard is applicable to type BAS, as described in 4.2.2, decorative fuel effect gas appliances that are designed to be installed with

24、in a non-combustible builders opening or a non- combustible fireplace recess. in addition, this standard is applicable to decorative fuel-effect gas appliances that are designed to be installed under a non-combustible canopy which may be independent or integral with a flue box, for which additional

25、requirements are specified in annex C. This standard is not applicable to: - catalytic combustion appliances; - appliances in which the supply of combustion air andor the evacuation of products of combustion is achieved by mechanical means. This standard is only applicable to appliances which are in

26、tended to be type tested. Matters related to quality assurance systems, tests during production and to certificates of conformity of auxiliary devices are not dealt with by this standard. Requirements concerning the rational use of energy have not been included in this European Standard because the

27、appliances are for decorative purposes. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated refere

28、nces, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. Page 6 EN 509 : 1999 EN88: 1991 EN 125: 1991 EN 126: 1995

29、EN 161: 1991 EN 298: 1993 EN 437: 1993 EN 23166: 1993 EN 60335-1: 1994 EN 60529: 1991 IS0 7 - 1: 1994 IS0228 - 1: 1994 IS0 274: 1975 Pressure governors for gas appliances for inlet pressures up to 20 mbar Flame supervision devices for gas burning appliances - Thermo-electric flame supervision device

30、s Multifunctional controls for gas burning appliances Automatic shut-off valves for gas burners and gas appliances Automatic gas burner control systems for gas burners and gas burning appliances with or without fans Test gases - Test pressures - Appliance categories Codes for the representations of

31、names of countries (IS0 3166 : 1993) Safety of household and similar electrical appliances - Part 1: General requirements (EC 60335-1 : 1991) Degrees of protection provided by enclosures (IF Code) (EC 60529 : 1989) Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions

32、, tolerances and designation Pipe threads where pressure-tight joints are not made on the threads - Part 1 : Dimensions, tolerances and designation Copper tubes of circular section - Dimensions Page 7 EN 509 : 1999 3 Definitions For the purposes of this standard the following definitions apply: 3.1

33、Decorative fuel effect gas appliances 3.1.1 decorative fuel effect gas fire (see figure 1): An appliance designed to simulate a solid fuel appliance for decorative purposes and intended to be installed so that the products of combustion pass unrestricted from the firebed to the chimney or flue. 3.1.

34、2 working surfaces: These include those parts of an appliance which, due to the nature of the appliance, have temperatures exceeding the limits specified in 6.4.1. Examples are: - Bricks, refractories, imitation fuel; - Fire fronts; - Fire baskets; - Canopies, burners, burner trays and bracketry. Wo

35、rking surfaces do not include that part of any surface within 25 mm of parts that have to be touched or removed during normal operation of the appliance. 3.2 Gases 3.2.1 reference conditions: - for calorific values, temperature: 15 OC; - for gas and air volumes dry, brought to 15 “C and an absolute

36、pressure of 1 013,25 mbar. Page 8 EN 509 : 1999 3.2.2 calorific value: The quantity of heat produced by the combustion, at a constant pressure of 1 O1 3,25 mbar, of unit volume or mass of gas, the constituents of the combustible mixture being taken at reference conditions and the products of combust

37、ion being brought back to the same conditions. A distinction is made between: - the gross calorific value in which the water produced by combustion is assumed to be condensed: Symbol: H, - the net calorific value in which the water produced by combustion is assumed to be in the vapour state; Symbol:

38、 H, Units: either: - megajoules per cubic metre (MJ/m3) of dry gas at the reference conditions; or - megajoules per kilogram (MJkg) of dry gas. EN 437: 19931 3.2.3 relative density: The ratio of the masses of equal volumes of dry gas and dry air at the same conditions of temperature and pressure. Sy

39、mbol: d 32.4 Wobbe index: The ratio of the calorific value of a gas per unit volume and the square root of its relative density under the same reference conditions. The Wobbe index is said to be gross or net according to whether the calorific value used is the gross or net calorific value. Symbol: g

40、ross Wobbe index: W, net Wobbe index: Wi Units: either: - megajoules per cubic metre (MJ/m3) of dry gas at the reference conditions, or - megajoules per kilogram (MJkg) of dry gas. EN 437: 19931 Page 9 EN 509 : 1999 3.2.5 test pressures: Gas pressures used to verify the operational characteristics o

41、f appliances using combustible gases. They consist of normal and limit pressures. They are expressed in millibar (mbar). NOTE: 1 mbar = 100 Pa. 3.2.6 normal pressure: The pressure under which appliances operate in .nominal conditions, when they are supplied with the corresponding reference gas. Symb

42、ol: pn. 3.2.7 limit pressures: Pressures representative of the extreme variations in the appliance supply conditions. Symbols: maximum pressure: pmax minimum pressure: Pmin 3.2.8 pressure couple: Combination of two distinct gas distribution pressures applied by reason of the significant difference e

43、xisting between the Wobbe indices within a single family or group in which: - the higher pressure corresponds only to gases of low Wobbe index; and - the lower pressure corresponds to gases of high Wobbe index. EN 437: 19931 3.3 Appliance construction 3.3.1 The gas circuit 3.3.1.1 inlet connection:

44、The part of the appliance intended to be connected to the gas supply. 3.3.1.2 mechanical joint: A connection device assuring soundness in an assembly of several parts, generally of metal. NOTE: For example the following: - cone seated joints; - torroidal sealing rings (O rings); Page 10 EN 509 : 199

45、9 - flat joints; - metal to metal joints. 3.3.1.3 gus circuit: The part of the appliance that conveys or contains the gas between the appliance gas inlet connection and the burner( s). 3.3.1.4 gus restrictor: A non-adjustable device which is placed in the gas circuit so as to create a pressure drop

46、and thus reduce the gas pressure at the burner to a predetermined value for a given supply pressure and rate. 3.3.1.5 gus rate adjuster: A component intended for the manufacturer or installer to set the gas rate to each burner at a predetermined value according to the supply conditions. The adjustme

47、nt may be progressive (screw adjuster) or discontinuous (changing restrictors). The adjuster of an adjustable governor is regarded as a gas rate adjuster. The action of setting this device is called setting the gas rate. 33.1.6 gus rate control: A component allowing the user to open or close the gas

48、 supply to one or more burners. It may also be used to adjust the gas rate of certain burners to a predetermined value, called the reduced rate. This device may be a tap. 3.3.1.7 injector: A component that admits the gas into a burner. 33.1.8 start-gas: The initial quantity of gas ignited to give a

49、flame which is used to ignite the main burner. It may be discharged through a separate ignition burner or part of the main burner. 33.2 Burner 3.3.2.1 main burner: A burner which assures the function of the appliance. It is usually called simply “burner“. 33.2.2 pun burner: A main burner which utilizes a particulate medium (e.g. sand) for the distribution of gas over a defined area. 3.3.2.3 ignition burner: A separate burner intended to light the main burner. 3.3.2.3.1 permanent ignition burner: An ignition burner that operates continuously throughout the whole peri