DIN EN 349 Berichtigung 1-2009 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body German version EN 349 1993+A1 2008 Corrigendum to DIN EN 349 2008-09《.pdf

《DIN EN 349 Berichtigung 1-2009 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body German version EN 349 1993+A1 2008 Corrigendum to DIN EN 349 2008-09《.pdf》由会员分享，可在线阅读，更多相关《DIN EN 349 Berichtigung 1-2009 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body German version EN 349 1993+A1 2008 Corrigendum to DIN EN 349 2008-09《.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、January 2009 English price group 99No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.110!$VJ“1518839www.din.deDDIN EN

2、 349 Corrigendum 1Safety of machinery Minimum gaps to avoid crushing of parts of the human body;Corrigendum 1 to English version of DIN EN 349:2008-09Sicherheit von Maschinen Mindestabstnde zur Vermeidung des Quetschens von Krperteilen; Berichtigung 1 zurenglischen Fassung DIN EN 349:2008-09www.beut

3、h.deDocument comprises 2 pagesThis corrigendum should be filed together with the translation of the standard to which it refers and a corresponding note made on the translation. DIN EN 349 Cor. 1:2009-01 2 This Corrigendum is based on CMC Resolution 3/2008. In the English version of DIN EN 349:2008-09 the following corrections are to be made: Re National foreword Start of validity Add the following sentence after the first: “DIN EN 349:1993-06 may be used in parallel until 28 December 2009.” Re European Foreword Replace “ December 2008” with “ December 2009”.