DIN EN 315-2000 Plywood - Tolerances for dimensions German version EN 315 2000《胶合板 尺寸公差》.pdf
《DIN EN 315-2000 Plywood - Tolerances for dimensions German version EN 315 2000《胶合板 尺寸公差》.pdf》由会员分享,可在线阅读,更多相关《DIN EN 315-2000 Plywood - Tolerances for dimensions German version EN 315 2000《胶合板 尺寸公差》.pdf(6页珍藏版)》请在麦多课文档分享上搜索。
1、DEUTSCHE NORM October 2000 Plywood Tolerances for dimensions English version of DIN EN 315 DIN EN 315 - ICs 79.060.1 O Sperrholz - Matoleranzen Supersedes August 1993 edition and parts of DIN 68705-2, July 1981 edition, DIN 68705-3 and DIN 68705-4, December 1981 editions, and DIN 68705-5, October 19
2、80 edition. European Standard EN 315 : 2000 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by CEN/TC 11 2 Wood-based panels, WG 2 Plywood. The responsible German body involved in its preparation was the Normenausschuss Holzw
3、irtschaft und Mbel (Timber and Furniture Standards Committee), Technical Committee 2.1 5. Amendments This standard differs from the August 1993 edition in that thickness tolerances for panels with a nominal thickness exceeding 25 mm have been added. Previous editions DIN EN 31 5: 1993-08; DIN 68705:
4、 1958-1 2, 1963-03; DIN 68705-1 : 1968-01 DIN 68705-2: 1968-01, 1968-07, 1968-09; DIN 68705-3: 1968-01, 1981 -1 2; DIN 68705-4: 1968-07, 1981 -1 2; DIN 68705-5: 1980-1 O. EN comprises 4 pages. No pari of this standard may be reproduced without the prior permission of V Deutsches Institut fur Normung
5、 e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, s the exclusive right of sale for German Standards (DIN-Normen). Ref. No. DIN EN 315 : 2000-1 English price group 05 Sales No. 1105 03.01 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 315 July 2000 ICs 79.060.10 Supersedes EN 31 5 : 19
6、93. English version Plywood Tolerances for dimensions Contreplaqu - Tolrances sur dimensions Sperrholz - Matoleranzen This European Standard was approved by CEN on 2000-07-07. CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this Euro
7、pean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stand- ards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (Englis
8、h, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Re
9、public, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat:
10、 rue de Stassart 36, B-1050 Brussels O 2000. CEN - All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. EN 315 : 2000 E Page 2 EN 31 5 : 2000 Contents Page Foreword . 2 1 Scope . 3 2 Normative references . . . . . . . . . . . . . . . . . . . .
11、 . . . . . . . . . . . . . . . . . . 3 3 Moisture content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4 Tolerances for length and width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 5 Tolerances for thickness . . . . . . . . . . . . . . . . . .
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DINEN3152000PLYWOODTOLERANCESFORDIMENSIONSGERMANVERSIONEN3152000 胶合板 尺寸 公差 PDF
链接地址:http://www.mydoc123.com/p-670052.html