DIN EN 1993-1-9-2010 Eurocode 3 Design of steel structures - Part 1-9 Fatigue German version EN 1993-1-9 2005 + AC 2009《欧洲法规3 钢结构的设计 第1-9部分 疲劳度 德文版本EN 1993-1-9-2005 + AC-2009》.pdf

《DIN EN 1993-1-9-2010 Eurocode 3 Design of steel structures - Part 1-9 Fatigue German version EN 1993-1-9 2005 + AC 2009《欧洲法规3 钢结构的设计 第1-9部分 疲劳度 德文版本EN 1993-1-9-2005 + AC-2009》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1993-1-9-2010 Eurocode 3 Design of steel structures - Part 1-9 Fatigue German version EN 1993-1-9 2005 + AC 2009《欧洲法规3 钢结构的设计 第1-9部分 疲劳度 德文版本EN 1993-1-9-2005 + AC-2009》.pdf（37页珍藏版）》请在麦多课文档分享上搜索。

1、December 2010 Translation by DIN-Sprachendienst.English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I

2、CS 91.010.30; 91.080.10!$lsN“1738043www.din.deDDIN EN 1993-1-9Eurocode 3: Design of steel structures Part 1-9: Fatigue(includes Corrigendum AC:2009)English translation of DIN EN 1993-1-9:2010-12Eurocode 3: Bemessung und Konstruktion von Stahlbauten Teil 1-9: Ermdung(enthlt Berichtigung AC:2009)Engli

3、sche bersetzung von DIN EN 1993-1-9:2010-12Eurocode 3: Calcul des structures en acier Partie 1-9: Fatigue(Corrigendum AC:2009 inclus)Traduction anglaise de DIN EN 1993-1-9:2010-12Supersedes DIN EN 1993-1-9:2005-07;together with DIN EN 1993-1-1:2010-12, DIN EN 1993-1-1/NA:2010-12, DIN EN 1993-1-3:201

4、0-12,DIN EN 1993-1-3/NA:2010-12, DIN EN 1993-1-5:2010-12, DIN EN 1993-1-5/NA:2010-12,DIN EN 1993-1-8:2010-12, DIN EN 1993-1-8/NA:2010-12, DIN EN 1993-1-9/NA:2010-12,DIN EN 1993-1-10:2010-12, DIN EN 1993-1-10/NA:2010-12, DIN EN 1993-1-11:2010-12 andDIN EN 1993-1-11/NA:2010-12 supersedes DIN 18800-1:2

5、008-11;supersedes DIN EN 1993-1-9 Corrigendum 1:2009-12Supersedes: see belowwww.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.3703.11 DIN EN 1993-1-9:2010-12 2 A comma is used as the decimal marker. National foreword This standard ha

6、s been prepared by Technical Committee CEN/TC 250 “Structural Eurocodes” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-08-16 AA Tragwerksbemes

7、sung (SpCEN/TC 250/SC 3). EN 1993-1-9 was approved by CEN on 23 April 2004. This European Standard is part of a series of standards dealing with structural design (Eurocodes) which are intended to be used as a “package”. In Guidance Paper L on the application and use of Eurocodes, issued by the EU C

8、ommission, reference is made to transitional periods for the introduction of the Eurocodes in the Member states. The transitional periods are given in the Foreword of this standard. In Germany, this standard is to be applied in conjunction with the National Annex. Attention is drawn to the possibili

9、ty that some of the elements of this document may be the subject of patent rights. DIN and/or DKE shall not be held responsible for identifying any or all such patent rights. The start and finish of text introduced or altered by amendment is indicated in the text by tags . Amendments This standard d

10、iffers from DIN V ENV 1993-1-1:1993-04, DIN V ENV 1993-1-1/A1:2002-05 and DIN V ENV 1993-1-1/A2:2002-05 as follows: a) the prestandard status has been changed to that of a full standard; b) the standards have been divided up into Part 1-1, Part 1-8, Part 1-9 and Part 1-10; c) the comments received f

11、rom the national member bodies of CEN have been taken into account and the standard has been completely revised. DIN 18800-1:2008-11, the following corrections have been made: a) the standard has been based on European design rules; b) superseding notes have been corrected; c) this standard is the c

12、onsolidated version of the previous 2005 edition with Corrigendum AC:2009; d) the standard has been editorially revised. Compared with DIN EN 1993-1-9:2005-07, DIN EN 1993-1-9 Corrigendum 1:2009-12 and DIN EN 1993-1-9:2010-12 3 Previous editions DIN 1050: 1934-08, 1937xxxxx-07, 1946-10, 1957x-12, 19

13、68-06 DIN 1073: 1928-04, 1931-09, 1941-01, 1974-07 DIN 1073 Supplement: 1974-07 DIN 1079: 1938-01, 1938-11, 1970-09 DIN 4100: 1931-05, 1933-07, 1934xxxx-08, 1956-12, 1968-12 DIN 4101: 1937xxx-07, 1974-07 DIN 18800-1: 1981-03, 1990-11, 2008-11 DIN 18800-1/A1: 1996-02 DIN V ENV 1993-1-1: 1993-04 DIN V

14、 ENV 1993-1-1/A1: 2002-05 DIN V ENV 1993-1-1/A2: 2002-05 DIN EN 1993-1-9: 2005-07 DIN EN 1993-1-9 Corrigendum 1: 2009-12 DIN EN 1993-1-9:2010-12 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1993-1-9 May 2005 + AC April 2009 ICS 91.010.30; 91.080.10 Supersed

15、es ENV 1993-1-1:1992English version Eurocode 3: Design of steel structures Part 1-9: Fatigue Eurocode 3: Calcul des structures en acier Partie 1-9: Fatigue Eurocode 3: Bemessung und Konstruktion von Stahlbauten Teil 1-9: Ermdung EN 1993-1-9:2005 was approved by CEN on 2004-04-23 and Amendment AC:200

16、9 on 2009-04-01. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may

17、 be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Managem

18、ent Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlan

19、ds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in an

20、y form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1993-1-9:2005 + AC:2009 EDIN EN 1993-1-9:2010-12 EN 1993-1-9:2005 + AC:2009 (E) 2 Contents Page Foreword 3 1 General . 6 1.1 Scope . 6 1.2 Normative references. 6 1.3 Terms and definitions 6 1.4 Symbols . 9 2 Basic requ

21、irements and methods . 9 3 Assessment methods 10 4 Stresses from fatigue actions 11 5 Calculation of stresses . 12 6 Calculation of stress ranges 13 6.1 General 13 6.2 Design value of nominal stress range 13 6.3 Design value of modified nominal stress range. 14 6.4 Design value of stress range for w

22、elded joints of hollow sections 14 6.5 Design value of stress range for geometrical (hot spot) stress 14 7 Fatigue strength. 14 7.1 General 14 7.2 Fatigue strength modifications 17 8 Fatigue verification 18 Annex A normative Determination of fatigue load parameters and verification formats . 30 Anne

23、x B normative Fatigue resistance using the geometric (hot spot) stress method 33 DIN EN 1993-1-9:2010-12 EN 1993-1-9:2005 + AC:2009 (E) 3 Foreword This document (EN 1993-1-9:2005 + AC:2009) has been prepared by Technical Committee CEN/TC 250 “Structural Eurocodes”, the secretariat of which is held b

24、y BSI. CEN/TC 250 is responsible for all Structural Eurocodes. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2005, and conflicting national standards shall be withdrawn at the latest by

25、 March 2010. This document supersedes ENV 1993-1-1:1992. Background to the Eurocode programme In 1975, the Commission of the European Community decided on an action programme in the field of construction, based on article 95 of the Treaty. The objective of the programme was the elimination of techni

26、cal obstacles to trade and the harmonization of technical specifications. Within this action programme, the Commission took the initiative to establish a set of harmonized technical rules for the design of construction works which, in a first stage, would serve as an alternative to the national rule

27、s in force in the Member States and, ultimately, would replace them. For fifteen years, the Commission, with the help of a Steering Committee with Representatives of Member States, conducted the development of the Eurocodes programme, which led to the first generation of European codes in the 1980s.

28、 In 1989, the Commission and the Member States of the EU and EFTA decided, on the basis of an agreement1between the Commission and CEN, to transfer the preparation and the publication of the Eurocodes to CEN through a series of Mandates, in order to provide them with a future status of European Stan

29、dard (EN). This links de facto the Eurocodes with the provisions of all the Councils Directives and/or Commissions Decisions dealing with European standards (e.g. the Council Directive 89/106/EEC on construction products - CPD - and Council Directives 93/37/EEC, 92/50/EEC and 89/440/EEC on public wo

30、rks and services and equivalent EFTA Directives initiated in pursuit of setting up the internal market). The Structural Eurocode programme comprises the following standards generally consisting of a number of Parts: EN 1990 Eurocode 0: Basis of Structural Design EN 1991 Eurocode 1: Actions on struct

31、ures EN 1992 Eurocode 2: Design of concrete structures EN 1993 Eurocode 3: Design of steel structures EN 1994 Eurocode 4: Design of composite steel and concrete structures EN 1995 Eurocode 5: Design of timber structures EN 1996 Eurocode 6: Design of masonry structures EN 1997 Eurocode 7: Geotechnica

32、l design EN 1998 Eurocode 8: Design of structures for earthquake resistance EN 1999 Eurocode 9: Design of aluminium structures 1Agreement between the Commission of the European Communities and the European Committee for Standardisation (CEN) concerning the work on EUROCODES for the design of buildin

33、g and civil engineering works (BC/CEN/03/89). According to the CEN-CENELEC Internal Regulations, the National Standard Organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Franc

34、e, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 1993-1-9:2010-12 EN 1993-1-9:2005 + AC:2009 (E) 4 Eurocode standards recognize the res

35、ponsibility of regulatory authorities in each Member State and have safeguarded their right to determine values related to regulatory safety matters at national level where these continue to vary from State to State. Status and field of application of Eurocodes The Member States of the EU and EFTA r

36、ecognize that Eurocodes serve as reference documents for the following purposes : as a means to prove compliance of building and civil engineering works with the essential requirements of Council Directive 89/106/EEC, particularly Essential Requirement N1 Mechanical resistance and stability and Esse

37、ntial Requirement N2 Safety in case of fire; as a basis for specifying contracts for construction works and related engineering services; as a framework for drawing up harmonized technical specifications for construction products (ENs and ETAs) The Eurocodes, as far as they concern the construction

38、works themselves, have a direct relationship with the Interpretative Documents2referred to in Article 12 of the CPD, although they are of a different nature from harmonized product standards3. Therefore, technical aspects arising from the Eurocodes work need to be adequately considered by CEN Techni

39、cal Committees and/or EOTA Working Groups working on product standards with a view to achieving full compatibility of these technical specifications with the Eurocodes. The Eurocode standards provide common structural design rules for everyday use for the design of whole structures and component pro

40、ducts of both a traditional and an innovative nature. Unusual forms of construction or design conditions are not specifically covered and additional expert consideration will be required by the designer in such cases. National Standards implementing Eurocodes The National Standards implementing Euro

41、codes will comprise the full text of the Eurocode (including any annexes), as published by CEN, which may be preceded by a National title page and National foreword, and may be followed by a National annex. The National annex may only contain information on those parameters which are left open in th

42、e Eurocode for national choice, known as Nationally Determined Parameters, to be used for the design of buildings and civil engineering works to be constructed in the country concerned, i.e. : values and/or classes where alternatives are given in the Eurocode, values to be used where a symbol only i

43、s given in the Eurocode, country specific data (geographical, climatic, etc.), e.g. snow map, the procedure to be used where alternative procedures are given in the Eurocode. It may contain decisions on the application of informative annexes, references to non-contradictory complementary information

44、 to assist the user to apply the Eurocode. 2According to Art. 3.3 of the CPD, the essential requirements (ERs) shall be given concrete form in interpretative documents for the creation of the necessary links between the essential requirements and the mandates for harmonized ENs and ETAGs/ETAs. 3 Acc

45、ording to Art. 12 of the CPD the interpretative documents shall : a) give concrete form to the essential requirements by harmonizing the terminology and the technical bases and indicating classes or levels for each requirement where necessary ; b) indicate methods of correlating these classes or lev

46、els of requirement with the technical specifications, e.g. methods of calculation and of proof, technical rules for project design, etc. ; c) serve as a reference for the establishment of harmonized standards and guidelines for European technical approvals. The Eurocodes, de facto, play a similar ro

47、le in the field of the ER 1 and a part of ER 2. DIN EN 1993-1-9:2010-12 EN 1993-1-9:2005 + AC:2009 (E) 5 Links between Eurocodes and harmonized technical specifications (ENs and ETAs) for products There is a need for consistency between the harmonized technical specifications for construction produc

48、ts and the technical rules for works4. Furthermore, all the information accompanying the CE Marking of the construction products which refer to Eurocodes should clearly mention which Nationally Determined Parameters have been taken into account. National annex for EN 1993-1-9 This standard gives alt

49、ernative procedures, values and recommendations with notes indicating where national choices may have to be made. The National Standard implementing EN 1993-1-9 should have a National Annex containing all Nationally Determined Parameters for the design of steel structures to be constructed in the relevant country. National choice is allowed in EN 1993-1-9 through: 1.1(2) 2(2) 2(4) 3(2) 3(7) 5(2) 6.1(1) 6.2(2) 7.1(3) 7.1(5) 8(4) 4see Art.3.3 and Art.12 of the CPD, as well as clauses 4.2, 4.3.1, 4.3.2 and