DIN EN 1918-5-2016 en 5237 Gas infrastructure - Underground gas storage - Part 5 Functional recommendations for surface facilities German version EN 1918-5 2016《供气系统 气体的地下存储 第5部分 地.pdf

《DIN EN 1918-5-2016 en 5237 Gas infrastructure - Underground gas storage - Part 5 Functional recommendations for surface facilities German version EN 1918-5 2016《供气系统 气体的地下存储 第5部分 地.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1918-5-2016 en 5237 Gas infrastructure - Underground gas storage - Part 5 Functional recommendations for surface facilities German version EN 1918-5 2016《供气系统 气体的地下存储 第5部分 地.pdf（21页珍藏版）》请在麦多课文档分享上搜索。

1、November 2016 English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 75.200This standard has been in

2、cluded in the body of DVGW Technical Rules.!%uZ“2588255www.din.deDIN EN 1918-5Gas infrastructure Underground gas storage Part 5: Functional recommendations for surface facilities;English version EN 19185:2016,English translation of DIN EN 1918-5:2016-11Gasinfrastruktur Untertagespeicherung von Gas T

3、eil 5: Funktionale Empfehlungen fr bertageanlagen;Englische Fassung EN 19185:2016,Englische bersetzung von DIN EN 1918-5:2016-11Infrastructures gazires Stockage souterrain de gaz Partie 5: Recommandations fonctionnelles pour les installations de surface;Version anglaise EN 19185:2016,Traduction angl

4、aise de DIN EN 1918-5:2016-11SupersedesDIN EN 19185:199807www.beuth.deDocument comprises 21 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.11.16 DIN EN 1918-5:2016-11 2 A comma is used as the decimal marker. National foreword

5、This document (EN 1918-5:2016) has been prepared by Technical Committee CEN/TC 234 “Gas infrastructure” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Gastechnik (DIN Standards Committee Gas Technology), Working Committee NA 032-02-07 AA

6、Untertagegasspeicher. This standard constitutes Part 5 of the series DIN EN 1918 Gas infrastructure Underground gas storage, which comprises the following five parts: Part 1: Functional recommendations for storage in aquifers Part 2: Functional recommendations for storage in oil and gas fields Part

7、3: Functional recommendations for storage in solution-mined salt caverns Part 4: Functional recommendations for storage in rock caverns Part 5: Functional recommendations for surface facilities Part 5 of the series covers the functional requirements for design, construction, testing, commissioning,

8、operation, maintenance and abandonment of the surface facilities for underground gas storage (UGS) between the wellhead and the connection to the gas grid. It is intended to include this standard in the body of technical rules and standards for gas issued by the DVGW Deutscher Verein des Gas- und Wa

9、sserfaches e.V. (German Technical and Scientific Association for Gas and Water). Amendments This standard differs from DIN EN 1918-5:1998-07 as follows: a) Clause 2 “Normative references has been added; b) activities and reviews related to safety have been included in Clause 5; c) Clause 8 “HSE” has

10、 been added; d) Clause 9 “Abandonment” has been added. Previous editions DIN EN 1918-5: 1998-07 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1918-5 March 2016 ICS 75.200 Supersedes EN 1918-5:1998English Version Gas infrastructure - Underground gas storage - Part 5: Functional recommendations

11、 for surface facilities Infrastructures gazires - Stockage souterrain de gaz - Partie 5: Recommandations fonctionnelles pour les installations de surface Gasinfrastruktur - Untertagespeicherung von Gas -Teil5: Funktionale Empfehlungen fr bertageanlagen This European Standard was approved by CEN on 9

12、 January 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may b

13、e obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to

14、the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, I

15、reland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management

16、Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1918-5:2016 E2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Requirements for underground gas storage . 5 3.1

17、 General 5 3.2 Underground gas storage . 5 3.3 Injection facilities 8 3.4 Withdrawal facilities 9 3.5 Utilities . 10 3.6 Leaching and debrining facilities for salt caverns . 10 3.7 LPG . 11 4 Design . 12 4.1 General . 12 4.2 Safety and environmental issues 12 4.3 Engineering 13 4.4 Security 13 4.5 P

18、umps and compressors . 13 4.6 Process control and monitoring . 13 4.7 Back-up systems . 13 4.8 Manning levels 13 4.9 Maintenance and inspection 13 4.10 Flaring and venting 14 4.11 Prevention and control of fires and explosions 14 5 Construction . 14 6 Testing and commissioning 14 7 Operation and mai

19、ntenance . 14 8 HSE . 15 8.1 HSE management 15 8.2 Emergency procedures 15 9 Abandonment 15 9.1 General . 15 9.2 Withdrawal of the gas . 16 9.3 Plugging and abandonment of wells . 16 9.4 Surface facilities . 16 9.5 Monitoring 16 Annex A (informative) Non-exhaustive list of relevant standards 17 Anne

20、x B (informative) Significant technical changes between this European Standard and the previous version EN 1918-5:1998 . 19 EN 1918-5:2016 (E) DIN EN 1918-5:2016-11 3 European foreword This document (EN 1918-5:2016) has been prepared by Technical Committee CEN/TC 234 “Gas infrastructure”, the secret

21、ariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2016 and conflicting national standards shall be withdrawn at the latest by September 2016. Attention is dr

22、awn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1918-5:1998. This document has been prepared under a mandate given to CEN

23、 by the European Commission and the European Free Trade Association. For a list of significant technical changes between this European Standard and EN 1918-5:1998, see Annex B. This document is Part 5 of a European Standard on “Gas infrastructure - Underground gas storage” which includes the followi

24、ng five parts: Part 1: Functional recommendations for storage in aquifers; Part 2: Functional recommendations for storage in oil and gas fields; Part 3: Functional recommendations for storage in solution-mined salt cavities; Part 4: Functional recommendations for storage in rock caverns; Part 5: Fun

25、ctional recommendations for surface facilities. Directive 2009/73/EC concerning common rules for the internal market in natural gas and the related Regulation (EC) No 715/2009 on conditions for access to the natural gas transmission networks also aim at technical safety including technical reliabili

26、ty of the European gas system. These aspects are also in the scope of CEN/TC 234 standardization. In this respect, CEN/TC 234 evaluated the indicated EU legislation and amended this technical standard accordingly, where required and appropriate. According to the CEN-CENELEC Internal Regulations, the

27、 national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia

28、, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 1918-5:2016 (E) DIN EN 1918-5:2016-11 4 1 Scope This European Standard covers the functional recommendations for the design, construction,

29、 testing, commissioning, operation, maintenance and abandonment of the surface facilities for underground gas storage (UGS), between the wellhead and the connection to the gas grid. It specifies practices which are safe and environmentally acceptable. For necessary subsurface facilities for undergro

30、und storage, the relevant part of EN 1918-1 to EN 1918-4 applies. In this context, “gas“ is any hydrocarbon fuel: which is in a gaseous state at a temperature of 15 C and under a pressure of 0,1 MPa (this includes natural gas, compressed natural gas (CNG) and liquefied petroleum gas (LPG). The store

31、d product is also named fluid); which meets specific quality requirements in order to maintain underground storage integrity, performance, environmental compatibility and fulfils contractual requirements. This European Standard specifies common basic principles for underground gas storage facilities

32、. Users of this European Standard should be aware that more detailed standards and/or codes of practice exist. A non-exhaustive list of relevant standards can be found in Annex A. This European Standard is intended to be applied in association with these national standards and/or codes of practice a

33、nd does not replace them. In the event of conflicts in terms of more restrictive requirements in the national legislation/regulation with the requirements of this European Standard, the national legislation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts). NOTE CEN/TR 13737 (al

34、l parts) contains: clarification of relevant legislation/regulations applicable in a country; if appropriate, more restrictive national requirements; national contact point for the latest information. This European Standard is not intended to be applied retrospectively to existing facilities. 2 Norm

35、ative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)

36、 applies. EN 1918-1, Gas infrastructure - Underground gas storage - Part 1: Functional recommendations for storage in aquifers EN 1918-2, Gas infrastructure - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields EN 1918-3, Gas infrastructure - Underground ga

37、s storage - Part 3: Functional recommendations for storage in solution-mined salt cavities EN 1918-5:2016 (E) DIN EN 1918-5:2016-11 5 EN 1918-4, Gas infrastructure - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns 3 Requirements for underground gas storage 3.

38、1 General The main equipment that may be required for both the withdrawal and the injection operations of gas storage facility is described below. Where no specific mention of LPG or natural gas is made, the following statements refer to both. 3.2 Underground gas storage 3.2.1 Overview and functiona

39、lity of underground gas storage EN 1918 covers storage of natural gas, Compressed Natural Gas (CNG) and Liquefied Petroleum Gas (LPG). Because of the relevance of underground gas storage of CNG the major part of this introduction is related to the storage of natural gas. The underground gas storage

40、(UGS) is an efficient proven common technology and is in use since 1915. UGS became an essential indispensable link in the gas supply chain for adjusting supply to meet short-term and seasonal changes in demand. Natural gas produced from oil and gas fields is increasingly being used to supply energy

41、 requirements. As the gas supply from these fields does not match with the variable market demand, natural gas is injected into subsurface storage reservoirs when market demand falls below the level of gas delivery or if there is an economic incentive for injection. Gas is withdrawn from storage fac

42、ilities to supplement the supply if demand exceeds that supply or withdrawal is economically attractive. The primary function of UGS is to ensure that supply is adjusted for peak and seasonal demand. Apart from this, the storage facilities can provide stand-by reserves in case of interruption of the

43、 planned supply. Increasingly UGS is applied for commercial storage services. Thus, in summary underground gas storage facilities can be used for: security of supply; providing flexibilities; balancing of seasonal demand variabilities; structuring of gas supply; provision of balancing energy for the

44、 optimization of transport grids; trading and arbitrage purpose; stand-by provisions and strategic reserves; structuring renewable energy sources power to gas; storage of associated gas as service for production optimization and resultant environmental conservation. EN 1918-5:2016 (E) DIN EN 1918-5:

45、2016-11 6 3.2.2 Types of UGS For storage of natural gas, several types of underground gas storage facilities can be used which differ by storage formation and storage mechanism (see Figure 1): pore storage: storage in aquifers; storage in former gas fields; storage in former oil fields. caverns: sto

46、rage in salt caverns; storage in rock caverns (including lined rock caverns); storage in abandoned mines. Key 1 operating wells 2 monitoring wells 3 indicator horizon 4 caprock 5 storage reservoir and stored gas 6 salt dome 7 cavern Figure 1 Storage in aquifers, oil and gas fields, solution mined sa

47、lt caverns For LPG storage, only salt or rock caverns can be applied. The UGS type applied is dependent on the geological conditions and prerequisites as well as on the designed capacity layout. EN 1918-5:2016 (E) DIN EN 1918-5:2016-11 7 3.2.3 General characterization of UGS UGS are naturally or art

48、ificially developed reservoirs respectively artificially developed caverns in subsurface geological formations used for the storage of natural gas (or LPG). A UGS consists of all subsurface and surface facilities required for the storage and for the withdrawal and injection of natural gas (or LPG).

49、Several subsurface storage reservoirs or caverns may be connected to one or several common surface facilities. The suitability of subsurface geological formations have to be investigated individually for each location, in order to operate the storage facilities in an efficient, safe and environmentally compatible manner. In order to construct a storage facility, wells are used to establish a controlled connection