DIN EN 1918-4-2016 Gas infrastructure - Underground gas storage - Part 4 Functional recommendations for storage in rock caverns German version EN 1918-4 2016《供气系统 气体的地下存储 第4部分 岩石洞穴.pdf

《DIN EN 1918-4-2016 Gas infrastructure - Underground gas storage - Part 4 Functional recommendations for storage in rock caverns German version EN 1918-4 2016《供气系统 气体的地下存储 第4部分 岩石洞穴.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1918-4-2016 Gas infrastructure - Underground gas storage - Part 4 Functional recommendations for storage in rock caverns German version EN 1918-4 2016《供气系统 气体的地下存储 第4部分 岩石洞穴.pdf（35页珍藏版）》请在麦多课文档分享上搜索。

1、November 2016 English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 75.200This standard has been in

2、cluded in the body of DVGW Technical Rules.!%uY“2588254www.din.deDIN EN 1918-4Gas infrastructure Underground gas storage Part 4: Functional recommendations for storage in rock caverns;English version EN 19184:2016,English translation of DIN EN 1918-4:2016-11Gasinfrastruktur Untertagespeicherung von

3、Gas Teil 4: Funktionale Empfehlungen fr die Speicherung in Felskavernen;Englische Fassung EN 19184:2016,Englische bersetzung von DIN EN 1918-4:2016-11Infrastructures gazires Stockage souterrain de gaz Partie 4: Recommandations fonctionnelles pour le stockage en cavits mines;Version anglaise EN 19184

4、:2016,Traduction anglaise de DIN EN 1918-4:2016-11SupersedesDIN EN 19184:199807www.beuth.deDocument comprises 35 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.11.16 DIN EN 1918-4:2016-11 2 A comma is used as the decimal marke

5、r. National foreword This document (EN 1918-4:2016) has been prepared by Technical Committee CEN/TC 234 “Gas infrastructure” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Gastechnik (DIN Standards Committee Gas Technology), Working Commi

6、ttee NA 032-02-07 AA Untertagegasspeicher. This standard constitutes Part 4 of the series DIN EN 1918 Gas infrastructure Underground gas storage, which comprises the following five parts: Part 1: Functional recommendations for storage in aquifers Part 2: Functional recommendations for storage in oil

7、 and gas fields Part 3: Functional recommendations for storage in solution-mined salt caverns Part 4: Functional recommendations for storage in rock caverns Part 5: Functional recommendations for surface facilities Part 4 of the series covers the functional requirements for design, construction, tes

8、ting, commissioning, operation, maintenance and abandonment of underground gas storage (UGS) facilities in rock caverns up to and including the wellhead. It is intended to include this standard in the body of technical rules and standards for gas issued by the DVGW Deutscher Verein des Gas- und Wass

9、erfaches e.V. (German Technical and Scientific Association for Gas and Water). Amendments This standard differs from DIN EN 1918-4:1998-07 as follows: a) Clause 2 “Normative references has been added; b) further terms and definitions have been included; c) activities and reviews related to safety ha

10、ve been included in Subclause 5.1; d) Subclause 8.4 “HSE” has been added; e) Clause 9 “Abandonment” has been added. Previous editions DIN EN 1918-4: 1998-07 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1918-4 March 2016 ICS 75.200 Supersedes EN 1918-4:1998English Version Gas infrastructure -

11、 Underground gas storage - Part 4: Functional recommendations for storage in rock cavernsInfrastructures gazires - Stockage souterrain de gaz - Partie 4: Recommandations fonctionnelles pour le stockage en cavits mines Gasinfrastruktur - Untertagespeicherung von Gas -Teil4: Funktionale Empfehlungen f

12、rdie Speicherung inFelskavernen This European Standard was approved by CEN on 9 January 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-dat

13、e lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

14、under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Form

15、er Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT

16、EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1918-4:2016 E2 Contents Page European foreword . 3 1 Scop

17、e 4 2 Normative references 4 3 Terms and definitions . 5 3.1 Terms and definitions common to parts 1 to 4 of EN 1918 5 3.2 Terms and definitions not common to parts 1 to 4 of EN 1918 9 4 General requirements 10 4.1 General . 10 4.2 Underground gas storage 10 4.3 Long-term containment of stored produ

18、cts . 15 4.4 Environmental conservation . 16 4.5 Safety 16 4.6 Monitoring 16 5 Design . 16 5.1 Design principles 16 5.2 Geological exploration . 18 5.3 Stored product containment 19 5.4 Determination of the maximum operating pressure (MOP) 19 5.5 Cavern stability . 20 5.6 Construction parameters 21

19、5.7 Concrete plug specifications 21 5.8 Connecting caverns to surface . 21 5.9 Monitoring systems . 24 5.10 Neighbouring subsurface activities . 24 6 Construction . 25 7 Testing and commissioning 26 7.1 General . 26 7.2 First gas filling . 27 8 Operation, monitoring and maintenance 27 8.1 Operating

20、principles . 27 8.2 Monitoring 27 8.3 Maintenance . 28 8.4 HSE . 28 9 Abandonment 29 9.1 General . 29 9.2 Withdrawing the fluid 29 9.3 Plugging and abandonment of wells and accesses . 29 9.4 Surface facilities . 30 9.5 Monitoring 30 Annex A (informative) Non-exhaustive list of relevant standards 31

21、Annex B (informative) Significant technical changes between this European Standard and the previous version EN 1918-4:1998 33 EN 1918-4:2016 (E) DIN EN 1918-4:2016-11 3 European foreword This document (EN 1918-4:2016) has been prepared by Technical Committee CEN/TC 234 “Gas infrastructure”, the secr

22、etariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2016 and conflicting national standards shall be withdrawn at the latest by September 2016. Attention is

23、drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1918-4:1998. This document has been prepared under a mandate given to C

24、EN by the European Commission and the European Free Trade Association. For a list of significant technical changes between this European Standard and EN 1918-4:1998, see Annex B. This document is Part 4 of a European Standard on “Gas infrastructure - Underground gas storage” which includes the follo

25、wing five parts: Part 1: Functional recommendations for storage in aquifers; Part 2: Functional recommendations for storage in oil and gas fields; Part 3: Functional recommendations for storage in solution-mined salt cavities; Part 4: Functional recommendations for storage in rock caverns; Part 5: F

26、unctional recommendations for surface facilities. Directive 2009/73/EC concerning common rules for the internal market in natural gas and the related Regulation (EC) No 715/2009 on conditions for access to the natural gas transmission networks also aim at technical safety including technical reliabi

27、lity of the European gas system. These aspects are also in the scope of CEN/TC 234 standardization. In this respect, CEN/TC 234 evaluated the indicated EU legislation and amended this technical standard accordingly, where required and appropriate. According to the CEN-CENELEC Internal Regulations, t

28、he national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv

29、ia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 1918-4:2016 (E) DIN EN 1918-4:2016-11 4 1 Scope This European Standard covers the functional recommendations for design, construction, t

30、esting, commissioning, operation, maintenance and abandonment of underground gas storage (UGS) facilities in mined rock caverns up to and including the wellhead. This European Standard does not cover the technology of lined rock. NOTE 1 Even if not covered in this standard, the lined rock is an avai

31、lable technology. This European Standard specifies practices which are safe and environmentally acceptable. For necessary surface facilities for underground gas storage, EN 1918-5 applies. In this context, “gas“ is any hydrocarbon fuel: which is in a gaseous state at a temperature of 15 C and under

32、a pressure of 0,1 MPa (this includes natural gas, compressed natural gas (CNG) and liquefied petroleum gas (LPG). The stored product is also named fluid); which meets specific quality requirements in order to maintain underground storage integrity, performance, environmental compatibility and fulfil

33、s contractual requirements. This European Standard specifies common basic principles for underground gas storage facilities. Users of this European Standard should be aware that more detailed standards and/or codes of practice exist. A non-exhaustive list of relevant standards can be found in Annex

34、A. This European Standard is intended to be applied in association with these national standards and/or codes of practice and does not replace them. In the event of conflicts in terms of more restrictive requirements in the national legislation/regulation with the requirements of this European Stand

35、ard, the national legislation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts). NOTE 2 CEN/TR 13737 (all parts) contains: clarification of relevant legislation/regulations applicable in a country; if appropriate, more restrictive national requirements; national contact point fo

36、r the latest information. This European Standard is not intended to be applied retrospectively to existing facilities. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, onl

37、y the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1918-5, Gas infrastructure - Underground gas storage - Part 5: Functional recommendations for surface facilities EN 1918-4:2016 (E) DIN EN 1918-4:2016-11 5 3 Term

38、s and definitions 3.1 Terms and definitions common to parts 1 to 4 of EN 1918 For the purposes of this document, the following terms and definitions apply. They are common to parts 1 to 4 of EN 1918. 3.1.1 abandoned well well permanently out of operation and permanently plugged including removed sur

39、face facilities 3.1.2 annulus space between two strings of pipes or between the casing and the borehole 3.1.3 aquifer reservoir, group of reservoirs, or a part thereof that is fully water-bearing and displaying differing permeability/porosity 3.1.4 auxiliary well well completed for other purposes th

40、an gas injection/withdrawal, e.g. water disposal 3.1.5 casing pipe or set of pipes that are screwed or welded together to form a string which is placed in the borehole for the purpose of supporting the borehole and to act as a barrier preventing subsurface migration of fluids when the annulus betwee

41、n it and the borehole has been cemented and to connect the storage reservoir respectively cavern to surface 3.1.6 casing shoe bottom end of a casing 3.1.7 cementing operation whereby usually a cement slurry is pumped and circulated down a cementation string within the casing and then upwards into th

42、e annulus between the casing and the open or cased hole 3.1.8 completion technical equipment inside the last cemented casing of a well 3.1.9 containment capability of the storage reservoir or cavern and the storage wells to resist leakage or migration of the fluids contained therein Note 1 to entry:

43、 This is also known as the integrity of a storage facility. EN 1918-4:2016 (E) DIN EN 1918-4:2016-11 6 3.1.10 core sample sample of rock taken during coring operation in order, e.g. to determine various parameters by laboratory testing and/or for a geological description 3.1.11 cushion gas volume ga

44、s volume required in a storage for reservoir management purpose and to maintain an adequate minimum storage pressure for meeting working gas volume delivery with a required withdrawal profile and in addition in caverns also for stability reasons Note 1 to entry: The cushion gas volume of storages in

45、 oil and gas fields may consist of recoverable and non-recoverable in-situ gas volumes and/or injected gas volumes. 3.1.12 drilling all technical activities connected with the construction of a well 3.1.13 exploration all technical activities connected with the investigation of potential storage loc

46、ations for the assessment of storage feasibility and derivation of design parameters 3.1.14 formation body of rock mass characterized by a degree of homogeneous lithology which forms an identifiable geologic unit 3.1.15 gas injection gas delivery from gas transport system into the reservoir/cavern t

47、hrough surface facilities and wells 3.1.16 gas inventory total of working and cushion gas volumes contained in UGS 3.1.17 gas withdrawal gas delivery from the reservoir / cavern through wells and surface facilities to gas transport system 3.1.18 geological modelling generating the image of a structu

48、re from the information gathered 3.1.19 indicator horizon horizon overlying the caprock in the storage area and used for monitoring 3.1.20 landing nipple device in a tubing string with an internal profile to provide for latching and sealing various types of plugs or valves EN 1918-4:2016 (E) DIN EN

49、1918-4:2016-11 7 3.1.21 liner casing installed within last cemented casing in the lowermost section of the well without extension to surface 3.1.22 lithology characteristics of rocks based on description of colour, rock fabrics, mineral composition, grain characteristics, and crystallization 3.1.23 logging measurement of physical parameters versus depth in a well 3.1.24 master valve valve at the wellhead designed to close off the well for operationa