DIN EN 1918-1-2016 Gas infrastructure - Underground gas storage - Part 1 Functional recommendations for storage in aquifers German version EN 1918-1 2016《供气系统 气体地下储藏 第1部分 在含水层中储藏的功.pdf

《DIN EN 1918-1-2016 Gas infrastructure - Underground gas storage - Part 1 Functional recommendations for storage in aquifers German version EN 1918-1 2016《供气系统 气体地下储藏 第1部分 在含水层中储藏的功.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1918-1-2016 Gas infrastructure - Underground gas storage - Part 1 Functional recommendations for storage in aquifers German version EN 1918-1 2016《供气系统 气体地下储藏 第1部分 在含水层中储藏的功.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、November 2016 English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 75.200!%pt“2587781www.din.deDIN

2、 EN 1918-1Gas infrastructure Underground gas storage Part 1: Functional recommendations for storage in aquifers;English version EN 19181:2016,English translation of DIN EN 1918-1:2016-11Gasinfrastruktur Untertagespeicherung von Gas Teil 1: Funktionale Empfehlungen fr die Speicherung in Aquiferen;Eng

3、lische Fassung EN 19181:2016,Englische bersetzung von DIN EN 1918-1:2016-11Infrastructures gazires Stockage souterrain de gaz Partie 1 : Recommandations fonctionnelles pour le stockage en nappe aquifre;Version anglaise EN 19181:2016,Traduction anglaise de DIN EN 1918-1:2016-11SupersedesDIN EN 19181:

4、199807www.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.Document comprises 38 pages 10.16 2 A comma is used as the decimal marker. National foreword This document (EN 1918-1:2016) has been prepared by Technical Committee C

5、EN/TC 234 “Gas infrastructure” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Gastechnik (DIN Standards Committee Gas Technology), Working Committee NA 032-02-07 AA Untertagegasspeicher. This standard constitutes Part 1 of the series DIN

6、EN 1918 Gas infrastructure Underground gas storage, which comprises the following five parts: Part 1: Functional recommendations for storage in aquifers Part 2: Functional recommendations for storage in oil and gas fields Part 3: Functional recommendations for storage in solution-mined salt caverns

7、Part 4: Functional recommendations for storage in rock caverns Part 5: Functional recommendations for surface facilities Part 1 of the series covers the functional requirements for design, construction, testing, commissioning, operation, maintenance and abandonment of underground gas storage (UGS) f

8、acilities in aquifers up to and including the wellhead. It is intended to include this standard in the body of technical rules and standards for gas issued by the DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (German Technical and Scientific Association for Gas and Water). Amendments This sta

9、ndard differs from DIN EN 1918-1:1998-07 as follows: a) Clause 2 “Normative references” has been added; b) further terms and definitions have been included; c) activities and reviews related to safety have been included in Subclause 5.1; d) further details regarding the maximum operating pressure de

10、termination have been added in Subclause 5.3.1; e) further aspects to be taken into account in the design of wells have been included in Subclause 5.4.1; f) Subclause 8.8 “HSE” has been added; g) Clause 9 “Abandonment” has been added. Previous editions DIN EN 1918-1: 1998-07 DIN EN 1918-1:2016-11 EU

11、ROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1918-1 March 2016 ICS 75.200 Supersedes EN 1918-1:1998English Version Gas infrastructure - Underground gas storage - Part 1: Functional recommendations for storage in aquifers Infrastructures gazires - Stockage souterrain de gaz - Partie 1 : Recomma

12、ndations fonctionnelles pour le stockage en nappe aquifre Gasinfrastruktur - Untertagespeicherung von Gas - Teil 1: Funktionale Empfehlungen fr die Speicherung inAquiferen This European Standard was approved by CEN on 10 January 2016. CEN members are bound to comply with the CEN/CENELEC Internal Reg

13、ulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN mem

14、ber. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

15、CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland

16、, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in

17、 any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1918-1:2016 EEN 1918-1:2016 (E) 2 Contents Page European foreword .3 1 Scope 4 2 Normative references 4 3 Terms and definitions 5 3.1 Terms and definitions common to parts 1 to 4 of EN 1918 5 3.2 Terms and definition

18、s not common to parts 1 to 4 of EN 1918 9 4 Requirements for underground gas storage 10 4.1 General . 10 4.2 Underground gas storage 10 4.3 Long-term containment of stored gas . 14 4.4 Environmental conservation 15 4.5 Safety . 15 4.6 Monitoring . 15 5 Design . 15 5.1 Design principles 15 5.2 Geolog

19、ical description 16 5.3 Determination of the maximum operating pressure. 18 5.4 Wells 20 5.5 Monitoring systems 25 5.6 Neighbouring subsurface activities . 27 6 Construction . 27 6.1 General . 27 6.2 Wells 28 6.3 Completions 28 6.4 Wellheads 28 7 Testing and commissioning 28 8 Operation, monitoring

20、and maintenance 29 8.1 Operating principles 29 8.2 Monitoring of the storage reservoir 29 8.3 Monitoring of indicator horizon 30 8.4 Monitoring of connected aquifers 31 8.5 Monitoring of wells 31 8.6 Injection and withdrawal operations 31 8.7 Maintenance of wells . 31 8.8 HSE . 32 9 Abandonment . 32

21、 9.1 General . 32 9.2 Withdrawal of the gas . 33 9.3 Plugging and abandonment of wells 33 9.4 Surface facilities 33 9.5 Monitoring . 33 Annex A (informative) Non-exhaustive list of relevant standards 34 Annex B (informative) Significant technical changes between this European Standard and the previo

22、us version EN 1918-1:1998 36 DIN EN 1918-1:2016-11EN 1918-1:2016 (E) 3 European foreword This document (EN 1918-1:2016) has been prepared by Technical Committee CEN/TC 234 “Gas infrastructure”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national st

23、andard, either by publication of an identical text or by endorsement, at the latest by September 2016 and conflicting national standards shall be withdrawn at the latest by September 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent r

24、ights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1918-1:1998. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. For a list of significant t

25、echnical changes between this European Standard and EN 1918-1:1998, see Annex B. This document is Part 1 of a European Standard on “Gas infrastructure - Underground gas storage”, which includes the following five parts: Part 1: Functional recommendations for storage in aquifers; Part 2: Functional r

26、ecommendations for storage in oil and gas fields; Part 3: Functional recommendations for storage in solution-mined salt caverns; Part 4: Functional recommendations for storage in rock caverns; Part 5: Functional recommendations for surface facilities. Directive 2009/73/EC concerning common rules for

27、 the internal market in natural gas and the related Regulation (EC) No 715/2009 on conditions for access to the natural gas transmission networks also aim at technical safety including technical reliability of the European gas system. These aspects are also in the scope of CEN/TC 234 standardization

28、. In this respect, CEN/TC 234 evaluated the indicated EU legislation and amended this technical standard accordingly, where required and appropriate. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europea

29、n Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloven

30、ia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 1918-1:2016-11EN 1918-1:2016 (E) 4 1 Scope This European Standard covers the functional recommendations for design, construction, testing, commissioning, operation, maintenance and abandonment of underground gas storage (UGS) faci

31、lities in aquifers up to and including the wellhead. It specifies practices, which are safe and environmentally acceptable. For necessary surface facilities for underground gas storage, EN 1918-5 applies. In this context “gas“ is any hydrocarbon fuel: which is in a gaseous state at a temperature of

32、15 C and under a pressure of 0,1 MPa (this includes natural gas, compressed natural gas (CNG) and liquefied petroleum gas (LPG). The stored product is also named fluid); which meets specific quality requirements in order to maintain underground storage integrity, performance, environmental compatibi

33、lity and fulfils contractual requirements. This European Standard specifies common basic principles for underground gas storage facilities. Users of this European Standard should be aware that more detailed standards and/or codes of practice exist. A non-exhaustive list of relevant standards can be

34、found in Annex A. This European Standard is intended to be applied in association with these national standards and/or codes of practice and does not replace them. In the event of conflicts in terms of more restrictive requirements in the national legislation/regulation with the requirements of this

35、 European Standard, the national legislation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts). NOTE CEN/TR 13737 (all parts) contains: clarification of relevant legislation/regulations applicable in a country; if appropriate, more restrictive national requirements; national con

36、tact point for the latest information. This European Standard is not intended to be applied retrospectively to existing facilities. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated re

37、ferences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1918-5, Gas infrastructure - Underground gas storage - Part 5: Functional recommendations for surface facilities DIN EN 1918-1:2016-11 EN 1918-1:2016

38、 (E) 5 3 Terms and definitions 3.1 Terms and definitions common to parts 1 to 4 of EN 1918 For the purposes of this document, the following terms and definitions apply. They are common to parts 1 to 4 of EN 1918. 3.1.1 abandoned well well permanently out of operation and permanently plugged includin

39、g removed surface facilities 3.1.2 annulus space between two strings of pipes or between the casing and the borehole 3.1.3 aquifer reservoir, group of reservoirs, or a part thereof that is fully water-bearing and displaying differing permeability/porosity 3.1.4 auxiliary well well completed for othe

40、r purposes than gas injection/withdrawal, e.g. water disposal 3.1.5 casing pipe or set of pipes that are screwed or welded together to form a string, which is placed in the borehole for the purpose of supporting the borehole and to act as a barrier preventing subsurface migration of fluids when the

41、annulus between it and the borehole has been cemented and to connect the storage reservoir respectively cavern to surface 3.1.6 casing shoe bottom end of a casing 3.1.7 cementing operation whereby usually a cement slurry is pumped and circulated down a cementation string within the casing and then u

42、pwards into the annulus between the casing and the open or cased hole 3.1.8 completion technical equipment inside the last cemented casing of a well 3.1.9 containment capability of the storage reservoir or cavern and the storage wells to resist leakage or migration of the fluids contained therein No

43、te 1 to entry: This is also known as the integrity of a storage facility. DIN EN 1918-1:2016-11EN 1918-1:2016 (E) 6 3.1.10 core sample sample of rock taken during coring operation in order, e.g. to determine various parameters by laboratory testing and/or for a geological description 3.1.11 cushion

44、gas volume gas volume required in a storage for reservoir management purpose and to maintain an adequate minimum storage pressure for meeting working gas volume delivery with a required withdrawal profile and in addition in caverns also for stability reasons Note 1 to entry: The cushion gas volume o

45、f storages in oil and gas fields may consist of recoverable and non-recoverable in-situ gas volumes and/or injected gas volumes. 3.1.12 drilling all technical activities connected with the construction of a well 3.1.13 exploration all technical activities connected with the investigation of potentia

46、l storage locations for the assessment of storage feasibility and derivation of design parameters 3.1.14 formation body of rock mass characterized by a degree of homogeneous lithology, which forms an identifiable geologic unit 3.1.15 gas injection gas delivery from gas transport system into the rese

47、rvoir/cavern through surface facilities and wells 3.1.16 gas inventory total of working and cushion gas volumes contained in UGS 3.1.17 gas withdrawal gas delivery from the reservoir or cavern through wells and surface facilities to a gas transport system 3.1.18 geological modelling generating the i

48、mage of a structure from the information gathered 3.1.19 indicator horizon horizon overlying the caprock in the storage area and used for monitoring 3.1.20 landing nipple device in a tubing string with an internal profile to provide for latching and sealing various types of plugs or valves DIN EN 19

49、18-1:2016-11EN 1918-1:2016 (E) 7 3.1.21 liner casing installed within last cemented casing in the lowermost section of the well without extension to surface 3.1.22 lithology characteristics of rocks based on description of colour, rock fabrics, mineral composition, grain characteristics and crystallization 3.1.23 logging measurement of physical parameters versus depth in a well 3.1.24 master valve valve at the wellhead designed to close off the well fo