DIN EN 1634-2-2009 Fire resistance and smoke control tests for door shutter and openable window assemblies and elements of building hardware - Part 2 Fire resistance characterisati.pdf

《DIN EN 1634-2-2009 Fire resistance and smoke control tests for door shutter and openable window assemblies and elements of building hardware - Part 2 Fire resistance characterisati.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1634-2-2009 Fire resistance and smoke control tests for door shutter and openable window assemblies and elements of building hardware - Part 2 Fire resistance characterisati.pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、May 2009DEUTSCHE NORM English price group 22No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.220.50!$W_5“1526018www.

2、din.deDDIN EN 1634-2Fire resistance and smoke control tests for door, shutter and openablewindow assemblies and elements of building hardware Part 2: Fire resistance characterisation test for elements of buildinghardwareEnglish version of DIN EN 1634-2:2009-05Feuerwiderstandsprfungen und Rauchschutz

3、prfungen fr Tren, Tore, Abschlsse,Fenster und Baubeschlge Teil 2: Charakterisierungsprfung zum Feuerwiderstand von BaubeschlgenEnglische Fassung DIN EN 1634-2:2009-05www.beuth.deDocument comprises 62 pagesDIN EN 1634-2:2009-05 2 National foreword This standard has been prepared by Technical Committe

4、e CEN/TC 127 “Fire safety in buildings” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Technical Committee NA 005-52-05 AA Brandverhalten von Baustoffen und Bauteilen F

5、euerschutz- und Rauchschutzabschlsse. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1634-2 November 2008 ICS 13.220.50; 91.060.50 English Version Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware -Part 2: Fire resistance

6、 characterisation test for elements of building hardware Essais de rsistance au feu et dtanchit aux fumes des portes, fermetures, fentres et lments de quincailleries - Partie 2: Essai de caractrisation du rsistance au feu des lments de quincailleries Feuerwiderstandsprfungen- und Rauchschutzprfungen

7、 fr Tren, Tore, Abschlsse, Fenster und Baubeschlge - Teil 2: Charakterisierungsprfungen zum Feuerwiderstand von Baubeschlgen This European Standard was approved by CEN on 13 September 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for g

8、iving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official

9、versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Bel

10、gium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FO

11、R STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwidefor CEN national Members. Ref. No. EN 1634-2:2008: EContents Page Foreword. 6 Intr

12、oduction 7 1 Scope 9 2 Normative references . 9 3 Terms and definitions. 10 4 Test conditions 11 4.1 Ambient conditions within laboratory 11 4.2 Heating conditions 12 4.3 Pressure conditions 12 4.3.1 General. 12 4.3.2 Pressure conditions for testing single axis hinges on side hung doors or openable

13、windows 12 4.3.3 Pressure conditions for testing securing devices 12 4.3.4 Pressure conditions for testing non-edge mounted items of building hardware 13 4.3.5 Pressure conditions for testing surface mounted overhead closing devices 13 4.3.6 Pressure conditions for the ignitibility test 13 5 Test co

14、nstruction 13 5.1 General. 13 5.2 Test construction for evaluating single axis hinges . 13 5.3 Test construction for evaluating securing devices. 14 5.4 Test construction for evaluating non-edge mounted items of building hardware 14 5.5 Test construction for evaluating ignition risk for items attach

15、ed to the unexposed face of uninsulating steel or glazed doors. 14 5.6 Test construction for evaluating surface mounted overhead controlled door closing devices for use on unlatched doorsets 14 6 Test specimen . 15 6.1 Associated construction 15 6.2 Conditioning 15 6.3 Fixings 15 6.4 Test specimen f

16、or evaluating single axis hinges 15 6.4.1 Design of test specimen. 15 6.4.2 Number of specimens. 16 6.4.3 Gap sizes . 16 6.4.4 Installation . 17 6.5 Test specimen for evaluating securing devices 17 6.5.1 Design of test specimen. 17 6.5.2 Number of test specimens . 17 6.5.3 Gap sizes . 17 6.5.4 Insta

17、llation . 17 6.6 Test specimen for the evaluation of non-edge mounted items of building hardware (including air transfer grilles) . 18 6.6.1 Design of test specimen. 18 6.6.2 Number of test specimens . 18 6.6.3 Gap sizes . 18 6.6.4 Installation . 18 6.7 Test specimen for evaluation of ignition risk

18、for surface mounted controlled overhead door closing devices . 18 6.7.1 Design of test specimen. 18 EN 1634-2:2008 (E) DIN EN 1634-2:2009-05 26.7.2 Number of test specimens . 19 6.7.3 Gap sizes . 19 6.7.4 Installation . 19 6.8 Test specimen for evaluating surface mounted overhead controlled door clo

19、sing devices for their ability to retain an unlatched timber door closed. 19 6.8.1 Design 19 6.8.2 Number of specimens. 19 6.8.3 Gap sizes . 19 6.8.4 Installation . 19 7 Loading and restraint . 20 7.1 General. 20 7.2 Loading and restraint conditions for evaluating single axis hinges . 20 7.2.1 Leaf

20、mass. 20 7.2.2 Applied point load to simulate distortion forces . 20 7.3 Loading and restraint conditions for evaluating securing devices. 20 7.3.1 Leaf mass. 20 7.3.2 Applied point load to simulate distortion forces . 20 8 Test equipment 21 8.1 Furnace 21 8.2 Measurement of ambient conditions 21 8.

21、3 Measurement of furnace conditions . 21 8.4 Loading equipment. 21 8.4.1 Types of loading 21 8.4.2 Method of loading . 21 8.5 Monitoring instrumentation . 21 8.5.1 Measurement of unexposed surface temperature. 21 8.5.2 Measurement of displacement 22 8.5.3 Measurement of force. 22 9 Pre-test examinat

22、ion/characterization of the specimen . 22 9.1 General. 22 9.2 Characterization of the test specimen for evaluating a single axis hinge 22 9.2.1 Dimension of the components 22 9.2.2 Location of the hinges 22 9.2.3 Materials. 23 9.2.4 Fixing of hinge to the associated construction . 23 9.3 Characteriz

23、ation of the test specimen for evaluating securing devices. 23 9.3.1 Dimensions of the components 23 9.3.2 Location of the securing device 23 9.3.3 Materials. 23 9.3.4 Fixing of securing device. 23 9.4 Characterisation of the test specimen for evaluating non-edge mounted items. 23 9.5 Characterisati

24、on of the test specimen for evaluating the ignition risk of surface mounted overhead controlled door closing devices 23 9.6 Characterisation of the test specimen for evaluating surface mounted overhead controlled door closing devices 24 9.6.1 Dimensions of the components 24 9.6.2 Materials. 24 9.6.3

25、 Fixing of the surface mounted overhead controlled door closing device 24 10 Test procedure 24 10.1 Common procedures 24 10.1.1 General. 24 10.1.2 Fixing of unexposed face thermocouples 24 10.1.3 Ambient air temperature. 24 10.1.4 Application of loading 25 10.1.5 Force measurement 25 10.1.6 Displace

26、ment measurement 25 10.1.7 Establishment of datum values . 25 EN 1634-2:2008 (E) DIN EN 1634-2:2009-05 310.2 Commencement of heating and control of heating conditions . 25 10.3 Test protocols . 25 10.3.1 Single axis hinges. 25 10.3.2 Securing devices. 25 10.3.3 Non edge mounted items . 26 10.3.4 Fac

27、e fixed controlled door closing devices . 26 10.4 Monitoring of criteria 26 10.5 Termination of test 26 11 Performance criteria . 26 11.1 General. 26 11.2 Resistance to loading. 27 11.3 Maintenance of closing force 27 11.4 Integrity (E) 27 11.5 Insulation (I). 27 11.6 Criteria relevant to each item

28、under evaluation. 27 11.6.1 Single axis hinges. 27 11.6.2 Securing devices. 27 11.6.3 Non-edge mounted items of building hardware 28 11.6.4 Surface mounted overhead controlled door closing devices 28 12 Expression of results 28 12.1 General. 28 12.2 Single axis hinges and securing devices.28 12.3 No

29、n-edge mounted items of building hardware 29 12.4 Evaluating the ignition risk from attaching surface mounted overhead controlled door closing devices to the unexposed face of uninsulating steel or glazed doors. 29 12.5 Surface mounted overhead controlled door closing devices for use on unlatched do

30、or assemblies 29 13 Test report . 29 14 Field of direct application 30 14.1 General. 30 14.1.1 Introduction . 30 14.1.2 Basis of the field of direct application 30 14.2 Single action hinges . 31 14.2.1 General. 31 14.2.2 Frame 31 14.2.3 Door leaf. 31 14.2.4 Configuration of the assembly 32 14.2.5 Do

31、or lipping/leaf edge construction . 32 14.2.6 Intumescent protection 33 14.2.7 Hinge blade clearance 33 14.2.8 Fixings 33 14.2.9 Gaps . 33 14.3 Securing devices. 33 14.3.1 General. 33 14.3.2 Frames 34 14.3.3 Door leaves and openable windows . 34 14.3.4 Configuration of the assembly 35 14.3.5 Door li

32、pping/leaf or window edge construction 35 14.3.6 Intumescent protection 35 14.3.7 Fixings 36 14.3.8 Position of locking plate and forend. 36 14.3.9 Gap . 36 14.4 Surface mounted overhead controlled door closing devices 36 14.4.1 Maintenance of closing force for unlatched door assemblies. 36 14.4.2 P

33、ower size 37 14.4.3 Closer cover 37 14.5 Non edge-mounted items of building hardware 37 EN 1634-2:2008 (E) DIN EN 1634-2:2009-05 414.5.1 Duration of performance 37 14.5.2 Door leaf or window construction. 37 14.5.3 Leaf thickness . 38 14.5.4 Fixings 38 14.5.5 Intumescent protection 38 14.5.6 Removal

34、 of constructional material 38 14.5.7 Size of air transfer grilles . 38 14.5.8 Ignition of closer damping fluid 38 Annex A (normative) Decision Trees 47 Annex B (informative) Guidance with respect to the test conditions . 54 B.1 Pressure conditions used when testing single axis hinges. 54 B.2 Applic

35、ation of load and measurement of displacement . 54 Annex C (informative) Role and criteria for building hardware in fire 55 C.1 Single axis hinges. 55 C.2 Securing devices. 55 C.3 Surface mounted overhead controlled door closing devices 55 C.4 Non-edge mounted items of building hardware 56 Annex D (

36、normative) Guidance on the suitability of reduced size furnaces 57 Annex E (informative) Guidance with respect to the test construction 58 E.1 External independent pivot 58 E.2 Selection of the associated construction. 58 Annex F (informative) Route to classification 59 Bibliography . 60 EN 1634-2:2

37、008 (E) DIN EN 1634-2:2009-05 5Foreword This document (EN 1634-2:2008) has been prepared by Technical Committee CEN/TC 127 “Fire safety in buildings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identic

38、al text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by May 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsibl

39、e for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive 89/106/EEC. EN 1634 Fire resistance and smoke control tests for door,

40、shutter and openable window assemblies and elements of building hardware of the following: Part 1: Fire resistance tests for doors, shutters and openable windows; Part 2: Fire resistance characterisation test for elements of building hardware; Part 3: Smoke control test for door and shutter assembli

41、es. If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. This draft European Standard was established by CEN in t

42、hree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. According to the CEN/CENELEC Internal Regulations

43、, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands

44、, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 1634-2:2008 (E) DIN EN 1634-2:2009-05 6Introduction This European Standard permits an evaluation of the contribution that a selected item of building hardware is able to make (either positi

45、ve or negative) to the fire resistance of a hinged or pivoted doorset or an openable window assembly without requiring a full size test. An item of building hardware does not have a fire resistance capability in itself because fire resistance is a term which can only be applied to an element of stru

46、cture and is quantified by means of the fire resistance test. An item of building hardware does, however, form part of a fire barrier (fire resisting doors and openable windows) and therefore is required to have demonstrated suitability for that purpose. See Annex F for the relationship of this Test

47、 Standard with door-related product standards, test methods and classification. This European Standard describes a procedure for determining the influence of building hardware with respect to fire resistance in terms of integrity and insulation when incorporated in a fire resisting door or openable

48、window assembly used for personnel access, maintenance, and in some countries, as a means of escape. Such test assemblies use reduced size specimens of the proposed construction in place of the full size assembly. More than one specimen may be tested together in a standard furnace test providing the

49、 separation of the elements required by EN 1363-1 is maintained. The test is designed to characterize the influence that the selected item of building hardware has on the fire resistance of a full size assembly in a manner that solely addresses the factors attributed to that item. There are five individual methods for characterizing the fire behaviour of the following items of building hardware. The scope of each method is given in the following: a) Method for testing single axis hinges and pivots for side hung door assemblies and openabl