DIN EN 1628-2016 Pedestrian doorsets windows curtain walling grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading German.pdf

《DIN EN 1628-2016 Pedestrian doorsets windows curtain walling grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading German.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1628-2016 Pedestrian doorsets windows curtain walling grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading German.pdf（81页珍藏版）》请在麦多课文档分享上搜索。

1、March 2016 English price group 27No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.310; 91.060.50!%Mb“2429963www.d

2、in.deDIN EN 1628Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Test method for the determination of resistance under static loading;English version EN 1628:2011+A1:2015,English translation of DIN EN 1628:2016-03Tren, Fenster, Vorhangfassaden, Gitterelemente un

3、d Abschlsse Einbruchhemmung Prfverfahren fr die Ermittlung der Widerstandsfhigkeit unter statischer Belastung;Englische Fassung EN 1628:2011+A1:2015,Englische bersetzung von DIN EN 1628:2016-03Blocs-portes pour pitons, fentres, faades rideaux, grilles et fermetures Rsistance leffraction Mthode dessa

4、i pour la dtermination de la rsistance la charge statique;Version anglaise EN 1628:2011+A1:2015,Traduction anglaise de DIN EN 1628:2016-03SupersedesDIN EN 1628:2011-09www.beuth.deDocument comprises 81 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be con

5、sidered authoritative.03.16 DIN EN 1628:2016-03 2 A comma is used as the decimal marker. National foreword This document (EN 1628:2011+A1:2015) has been prepared by Technical Committee CEN/TC 33 Tren, Tore, Fenster, Abschlsse, Baubeschlge und Vorhangfassaden (Secretariat: AFNOR, France). The respons

6、ible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-09-02 AA Einbruchschutz. This consolidated version modifies EN 1628:2011-09 in the following clauses: 3 (Terms and definitions), 5 (Test sp

7、ecimen), 6 (Procedure), Annex A and Annex B. Amendments This standard differs from DIN EN 1629:2011-09 as follows: a) terms and definitions in Clause 3 have been deleted, made more precise or elaborated on; b) more detailed requirements relating to the test specimen are given in Clause 5, and Table

8、1 has been replaced; c) the test procedure in Clause 6 is now described in greater detail; d) Figures A.11, A.14, A.39, A.40 and A.44 in Annex A have been replaced; e) Figure B.1 in Annex B has been replaced. Previous editions DIN 18103: 1983-11 DIN V 18054: 1989-09, 1991-12 DIN V 18103: 1992-03 DIN

9、 V ENV 1628: 1999-04 DIN EN 1628: 2011-09 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1628:2011+A1 December 2015 ICS 13.310; 91.060.50 Supersedes EN 1628:2011English Version Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determ

10、ination of resistance under static loading Blocs-portes pour pitons, fentres, faades rideaux, grilles et fermetures - Rsistance leffraction - Mthode dessai pour la dtermination de la rsistance la charge statique Tren, Fenster, Vorhangfassaden, Gitterelemente und Abschlsse - Einbruchhemmung - Prfverf

11、ahren fr die Ermittlung der Widerstandsfhigkeit unter statischer Belastung This European Standard was approved by CEN on 2 December 2010 and includes Amendment 1 approved by CEN on 17 November 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditi

12、ons for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists i

13、n three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standar

14、ds bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slove

15、nia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved

16、worldwide for CEN national Members. Ref. No. EN 1628:2011+A1:2015 EEN 1628:2011+A1:2015 (E) 2 Contents Page European foreword 5 1 Scope 7 2 Normative references 7 3 Terms and definitions . 7 4 Apparatus 9 4.1 Test rig 9 4.2 Load applicators 9 4.3 Hooks . 9 4.4 Straps. 9 4.5 Pressure pads . 9 4.6 Mea

17、suring equipment . 9 4.7 Sub-frame 9 4.8 Tolerances . 10 5 Test specimen 10 5.1 General 10 5.2 Preparation and examination of the test specimen . 12 6 Procedure 12 6.1 Test room climate . 12 6.2 General 12 6.3 Testing of group 1 and group 2 construction products . 12 6.3.1 Loading points for group 1

18、 and group 2 products 12 6.3.2 Test procedure for the infill medium retention system (product groups 1 and 2) 13 6.3.3 Test procedure for the leaf (product group 1, burglar resistance class 1) 14 6.3.4 Test procedure for the leaf (product group 1, burglar resistance classes 2 and higher) 14 6.3.5 Te

19、st procedure for the leaf (product group 2, burglar resistance class 1) 14 6.3.6 Test procedure for the leaf (product group 2, burglar resistance classes 2 and higher) 15 6.4 Expression of results for product groups 1 and 2 . 15 6.5 Testing of group 3 construction products 16 6.5.1 Loading points 16

20、 6.5.2 Loading direction 16 6.5.3 Loading and measurement procedure 16 6.5.4 Expression of results . 17 6.6 Testing of group 4 construction products 17 6.6.1 General 17 6.6.2 Resistance of moving !elements“ . 18 6.6.3 Resistance of other loading points . 18 6.6.4 Expression of results . 18 7 Test re

21、port . 18 Annex A (normative) Test Equipment 20 A.1 Examples for loading points F1 and F3 . 20 DIN EN 1628:2016-03 EN 1628:2011+A1:2015 (E) 3 A.2 Example of test rig 22 A.3 Examples for pressure pads for door sets, windows and shutters . 23 A.4 Examples for pressure pads for door sets, windows and s

22、hutters in places where it is necessary to bridge any item of furniture or a lock . 23 A.5 Examples for pressure pads for roller shutters . 24 A.6 Examples for pressure pads for roller shutters separate test for guide rails 25 A.7 Examples for pressure pads for grilles . 26 A.8 Examples of loading e

23、quipment for sliding doors, double leaf sliding doors, sliding windows and shutters . 26 A.9 Examples for hooks 27 A.10 Gap gauges . 28 A.11 Examples of mounting arrangements for door sets . 30 A.12 Examples of mounting arrangements for windows 33 A.13 Examples of mounting arrangements for wing and

24、folding shutters. 34 A.14 Examples of mounting arrangements for guide rails and roller shutters into the test rig 37 A.15 Examples of mounting arrangements for grilles into in the test rig 42 A.16 Loading points on door sets (load F3 and F2) in resistance class 1 to 6 . 45 A.17 Loading points on doo

25、r sets (load F3) in resistance class 1 to 6 47 A.18 Loading points on door sets (load F1 and F3) in resistance class 1 to 6 . 49 A.19 Loading points on door sets (load F3) in resistance class 1 to 6 51 A.20 Loading points on door sets (load F3 and F3.a) in resistance class 1 53 A.21 Additional loadi

26、ng points on door sets (load F3.a and F3) in resistance class 1 . 54 A.22 Additional loading points on door sets (load F3, F3.a and F2) in resistance class 1 56 A.23 Loading points on windows (loads F1 and F3) in resistance class 1 to 6 . 57 A.24 Additional loading points on windows (load F3.a and F

27、3) in resistance class 1 58 A.25 Additional loading points on double hinged windows 59 A.26 Additional loading points on windows (load F3.a) in resistance class 1 60 A.27 Additional loading points on windows (load F3.a and F3) in resistance class 1 61 A.28 Loading points on windows (loads F1 and F3)

28、 in resistance class 1 to 6 . 62 A.29 Loading points on a single leaf shutter (load F3) in resistance class 1 to 6 . 63 A.30 Loading points on a multi leaf shutter (loads F1 and F3) in resistance class 1 to 6 . 64 A.31 Loading points on a multi leaf wing shutter (loads F1 and F3) in resistance class

29、 1 to 6 . 65 A.32 Guide rail single test on roller shutters 66 A.33 Loading points on roller shutters (load F3) in resistance class 1 to 6 . 67 A.34 Loading points on roller shutters (load F2) in resistance class 1 to 6 . 68 DIN EN 1628:2016-03 EN 1628:2011+A1:2015 (E) 4 A.35 Loading points on rolle

30、r shutters (load F1) in resistance class 1 to 6 . 69 A.36 Loading points on fixed grilles (load F3) in resistance class 1 to 6 70 A.37 Loading points on moveable grilles (load F3) in resistance class 1 to 6 . 71 A.38 Loading points on roller grilles (load F3.2) in resistance class 1 to 6 . 72 Annex

31、B Test sequence for static loading test in resistance classes 1 to 6 74 Annex C Dislocation of window hardware against the locking direction 76 C.1 General 76 C.2 Test criteria . 76 C.3 Test method 76 Bibliography . 79 DIN EN 1628:2016-03 (normative)(normative)EN 1628:2011+A1:2015 (E) 5 European for

32、eword This document (EN 1628:2011+A1:2015) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication o

33、f an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by June 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be h

34、eld responsible for identifying any or all such patent rights. This document includes Amendment 1 approved by CEN on 2015-11-17. This document supersedes !EN 1628:2011“. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This European Standard is one

35、 of a series of standards for burglar resistant pedestrian doorsets, windows, curtain walling, grilles and shutters. The other standards in the series are: EN 1627:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Requirements and classification; !EN 1629:2

36、011+A1:2015“, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Test method for the determination of resistance under dynamic loading; !EN 1630:2011+A1:2015“, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Test method for t

37、he determination of resistance to manual burglary attempts. This standard is a revision of, and supersedes !EN 1628:2011“. The last two other standards in this series are revisions of, and supersede !EN 1629:2011“ and !EN 1630:2011“ respectively. This revision incorporates grilles and facades in the

38、 range of application. There are two aspects to the burglar resistance performance of a construction product: their resistance to forced operation and their ability to remain fixed to the building. Due to the limitation of reproducing the fixing methods and the buildings construction in a laboratory

39、 environment this aspect is not fully covered by the standard. This is particularly true with products built into a building. The performance of the fixed part of the product is evaluated using a standard sub frame. It is the manufacturers responsibility to ensure that guidance on the fixing of the

40、product is contained in the mounting instructions and that this guidance is suitable for the burglar resistance class claimed for the product. As with the other referenced standards this specification uses a standard sub frame and the product is mounted according to the manufacturers instructions. T

41、he fixing method to be considered is detailed in Annex A of EN 1627:2011. This test method does not evaluate the performance of the fixing to the building. DIN EN 1628:2016-03 EN 1628:2011+A1:2015 (E) 6 According to the CEN-CENELEC Internal Regulations, the national standards organizations of the fo

42、llowing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands

43、, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 1628:2016-03 EN 1628:2011+A1:2015 (E) 7 1 Scope This European Standard specifies a test method for the determination of resistance to static loading in order to assess the burgl

44、ar resistant properties of pedestrian door sets, windows, curtain walling, grilles and shutters. It is applicable to the following means of opening: Turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically) and rolling as well as fixed constructions. This Eur

45、opean Standard does not apply to doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by

46、 EN 13241-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356:1999,

47、Glass in building Security glazing Testing and classification of resistance against manual attack EN 1303:2005, Building hardware Cylinders for locks Requirements and test methods EN 1627:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Requirements and cl

48、assification !EN 1630:2011+A1:2015“, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance - Test method for the determination of resistance to manual burglary attempts EN 1906:2010, Building hardware Lever handles and knob furniture Requirements and test methods EN

49、12195-2, Load restraint assemblies on road vehicles Safety Part 2: Web lashing made from man-made fibres EN 12209:2003, Building hardware Locks and latches Mechanically operated locks, latches and locking plates - Requirements and test methods 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1627:2011 and the following apply. !deleted text“ 3.1 test specimen c