DIN EN 15725-2012 Extended application reports on the fire performance of construction products and building elements German version EN 15725 2010 + AC 2012《建筑产品和建筑构件的燃烧性能的扩展应用报告》.pdf

《DIN EN 15725-2012 Extended application reports on the fire performance of construction products and building elements German version EN 15725 2010 + AC 2012《建筑产品和建筑构件的燃烧性能的扩展应用报告》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 15725-2012 Extended application reports on the fire performance of construction products and building elements German version EN 15725 2010 + AC 2012《建筑产品和建筑构件的燃烧性能的扩展应用报告》.pdf（25页珍藏版）》请在麦多课文档分享上搜索。

1、May 2012 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13

2、.220.50!$|r“1888979www.din.deDDIN EN 15725Extended application reports on the fire performance of constructionproducts and building elements(includes Corrigendum AC:2012)English translation of DIN EN 15725:2012-05Berichte zum erweiterten Anwendungsbereich bezogen auf das Brandverhalten vonBauprodukt

3、en und Bauarten(enthlt Berichtigung AC:2012)Englische bersetzung von DIN EN 15725:2012-05Rapports dapplication tendue des performances au feu des produits et lments deconstruction(Corrigendum AC:2012 inclus)Traduction anglaise de DIN EN 15725:2012-05SupersedesDIN EN 15725:2010-11www.beuth.deDocument

4、 comprises pagesIn case of doubt, the German-language original shall be considered authoritative.2504.12 DIN EN 15725:2012-05 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee CEN/TC 127 “Fire safety in buildings” (Secretariat: BSI, Uni

5、ted Kingdom). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-52-02 AA Brandverhalten von Bau-stoffen und Bauteilen Bauteile. The Corrigendum EN 15725:2010/AC:2012 has been incorpo

6、rated in this document. The start and finish of text introduced or altered by amendment is indicated in the text by tags . Amendments Compared with DIN EN 15725:2010-11 the following corrections have been made: a) in the title of Subclause 5.2.2 “Fire resistance” has been replaced with “Fire resista

7、nce and/or smoke control”; b) in the title of Subclause 5.3.3 “Fire resistance” has been replaced with “Fire resistance and/or smoke control”; c) in the title of Annex B, “Format for an extended application report Fire resistance” has been replaced with “Format for an extended application report Fir

8、e resistance and/or smoke control”. Previous editions DIN EN 15725: 2010-11 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15725 June 2010 + AC January 2012 ICS 13.220.50 English Version Extended application reports on the fire performance of construction products and building elements Rapport

9、s dapplication tendue des performances au feu des produits et lments de construction Berichte zum erweiterten Anwendungsbereich bezogen auf das Brandverhalten von Bauprodukten und Bauarten EN 15725:2010 was approved by CEN on 2010-05-19 and Corrigendum AC:2012 on 2012-01-25. CEN members are bound to

10、 comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CE

11、NELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has t

12、he same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pola

13、nd, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by a

14、ny means reserved worldwide for CEN national Members. Ref. No. EN 15725:2010 + AC:2012: E2 Contents DIN EN 15725:2012-05 EN 15725:2010 + AC:2012 (E) Page Foreword . 3 Introduction 4 1 Scope 5 2 Normative references . 5 3 Terms and definitions . 5 4 Role of extended application in the classification

15、process 8 5 Principles of establishing the field of application . 9 5.1 General . 9 5.2 Direct field of application . 9 5.2.1 Reaction to fire 9 5.2.2 Fire resistance and/or smoke control . 9 5.2.3 External fire exposure to roofs 9 5.3 Extended field of application . 9 5.3.1 General principles . 9 5

16、.3.2 Reaction to fire 9 5.3.3 Fire resistance and/or smoke control . 10 5.3.4 External fire exposure to roofs 10 5.4 Combination of parameter variations . 11 5.5 Procedure for undertaking extended application 11 6 Information to be included in an extended application report . 12 Annex A (normative)

17、Format for an extended application report Reaction to fire . 14 Annex B (normative) Format for an extended application report Fire resistance and/or smoke control 17 Annex C (normative) Format for an extended application report External fire exposure to roofs . 20 Bibliography . 23 3 Foreword This d

18、ocument (EN 15725:2010) has been prepared by Technical Committee CEN/TC 127 “Fire safety in buildings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Dec

19、ember 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such pat

20、ent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icel

21、and, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 15725:2012-05 EN 15725:2010 + AC:2012 (E) 4 Introduction A construction product and a building element may be placed on

22、 the market with different thicknesses, densities, fixing conditions, substrates, etc. It is not practicable to test all combinations of different product parameters for the reaction to fire performance or fire resistance or external fire exposure performance, although these parameters may substanti

23、ally influence the test result. NOTE A building element is understood to be a defined construction component, e.g. wall, partition, floor, roof, beam or column. Fire test methods may not include any information on direct application, the result obtained in the test is that which is reported. In a se

24、parate exercise it is possible to extend the field of application of the individual test results to a variation of the values of the different product parameters. This process of extended application uses rules which are essentially based on a worst case scenario and interpolation techniques. All in

25、formation on extended field of application of reaction to fire results is given in CEN/TS 15117. There are a number of practical limitations on the size and design of elements that can be tested by the standard methods of test for fire resistance. When these elements are larger, or are of a modified

26、 design, there is a necessity to be able to confirm their performance, i.e. whether the classification(s) given in the classification report in relation to the relevant criteria are maintained, without the ability of being able to test them. To achieve this, extended application standards for the va

27、rious elements are under development. Rules for extended application of results from external fire exposure to roof tests are also under development. DIN EN 15725:2012-05 EN 15725:2010 + AC:2012 (E) 5 1 Scope This European Standard gives the procedures for preparing reports on the extended applicati

28、on process using the results of reaction to fire tests, fire resistance tests and external fire exposure to roof tests undertaken for fire classification of products and product families in accordance with the various parts of EN 13501. This standard makes reference to extended application standards

29、 throughout; wherever this term is used it refers to either a standard prepared by CEN/TC 127 Fire safety in buildings or the relevant product standard which includes information on extended application. In some cases, where a standard is not yet published, relevant bodies may issue recommendations

30、for use by Notified Bodies in attestation procedures for CE marking under the Construction Products Directive (CPD), http:/ec.europa.eu/enterprise/newapproach/nando/. The European system currently permits extended application rules to be included in technical specifications. CEN Technical Committees

31、 and EOTA Working groups producing these rules are asked to seek the guidance of CEN/TC 127 to ensure that their rules comply with standards prepared by CEN/TC 127. In cases where extended application rules in harmonised EN product standards and ETAs do not comply with standards prepared by CEN/TC 1

32、27 the CEN BT should be informed. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) a

33、pplies. EN 13238, Reaction to fire tests for building products Conditioning procedures and general rules for selection of substrates EN 13501-1:2007+A1:2009, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13501-2:20

34、07+A1, Fire classification of construction products and building elements Part 2: Classification using data from fire resistance tests, excluding ventilation services EN 13501-3:2005+A1, Fire classification of construction products and building elements Part 3: Classification using data from fire re

35、sistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers EN 13501-4:2007+A1, Fire classification of construction products and building elements Part 4: Classification using data from fire resistance tests on components of smoke control sys

36、tems EN 13501-5:2005+A1, Fire classification of construction products and building elements Part 5: Classification using data from external fire exposure to roofs tests CEN/TS 15117:2005, Guidance on direct and extended application CEN/TS 15447, Mounting and fixing in reaction to fire tests under th

37、e Construction Products Directive 3 Terms and definitions For the purposes of this document, the following terms and definitions apply: DIN EN 15725:2012-05 EN 15725:2010 + AC:2012 (E) 6 3.1 classification process defined in EN 13501, whereby the fire performance parameters obtained from the results

38、 of one test, or a set of tests, or from a process of extended application, are compared with limiting values for those parameters that are set as criteria for achieving a certain classification NOTE The relevant classes and related criteria are specified in the following Commission Decisions: a) Re

39、sistance to fire: 1) EC Decision 2000/367/EC (OJEU L 133 of 6.6.2000) as amended by EC Decision 2003/629/EC (OJEU L 218 of 30.8.2003); b) Reaction to fire: 1) EC Decision 2000/147/EC (OJEU L 50 of 23.2.2000) as amended by EC Decision 2003/632/EC (OJEU L 220 of 3.9.2003) and by EC Decision 2006/751/E

40、C (OJEU L 305 of 4.11.2006); c) External fire performance for roofs: 1) EC Decision 2001/671/EC (OJUE L 235 of 4.9.2001) as amended by EC Decision 2005/823/EC (OJEU L 307 of 25.11.2005). 3.2 product material, element or component about which information is required EN 13501-1:2007+A1:2009 3.3 produc

41、t family range of products within defined limits of variability (defined by the manufacturer or a technical specification) of the product parameters and, if relevant, end use parameters, for which the fire performance remains unchanged (i.e. does not get worse) 3.4 product parameter aspect of a prod

42、uct (for example thickness, composition, density) which may vary and which may or may not have an influence on the products fire performance 3.5 end use application where in the building the product is to be used, e.g. wall lining, flooring 3.6 end use condition way the product is incorporated into

43、the building, e.g. jointing, fixing and position with respect to adjacent products NOTE The mounting and fixing conditions for testing reflect the end use conditions. 3.7 test result outcome of a testing process and its associated procedures detailed within a specific test standard (which may includ

44、e some processing of the results from the testing of a number of specimens) and expressed in terms of one or more fire performance parameter(s) DIN EN 15725:2012-05 EN 15725:2010 + AC:2012 (E) 7 3.8 direct field of application of test results outcome of a process (involving the application of define

45、d rules) whereby a test result is deemed to be equally valid for variations in one or more of the product properties and/or intended end use applications 3.9 extended field of application of test results outcome of a process (involving the application of defined rules that may incorporate calculatio

46、n procedures) that predicts, for a variation of a product property and/or its intended end use application(s), a test result on the basis of one or more test results to the same test standard 3.10 extended application report document reporting extended application results, including all details of t

47、he process leading to those results 3.11 calculation method that can be applied to one or more parameters of a result of a test which is based on existing physical laws or which has been empirically validated and which forms part of the process of defining the extended application 3.12 agreed expert

48、 opinion results of a dialogue between a group of experts who are accepted by their peers as being knowledgeable in a particular fire test and the performance of products in that test. Such dialogue shall take place within a recognised and properly constituted forum, such as CEN/TC 127. These agreed expert opinions are then transformed into rules that may form the basis of extended application. Agreed expert opinion will lead notified bodies to a classification, suitable for the application of CE-marking. 3.13 e