DIN EN 15486-2007 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method English version of DIN EN 15486 2007-11《作为汽油混合组分之一的.pdf

《DIN EN 15486-2007 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method English version of DIN EN 15486 2007-11《作为汽油混合组分之一的.pdf》由会员分享，可在线阅读，更多相关《DIN EN 15486-2007 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method English version of DIN EN 15486 2007-11《作为汽油混合组分之一的.pdf（17页珍藏版）》请在麦多课文档分享上搜索。

1、November 2007DEUTSCHE NORM English price group 10No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 75.160.20!$J3“1391604

2、www.din.deDDIN EN 15486Ethanol as a blending component for petrol Determination of sulfur content Ultraviolet fluorescence methodEnglish version of DIN EN 15486:2007-11Ethanol zur Verwendung als Blendkomponente in Ottokraftstoff Bestimmung des Schwefelgehaltes Ultraviolettfluoreszenz-VerfahrenEnglis

3、che Fassung DIN EN 15486:2007-11www.beuth.deDocument comprises 17 pagesDIN EN 15486:2007-11 2 National foreword This standard has been prepared by Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin” (Secretariat: NEN

4、, Netherlands). The responsible German body involved in its preparation was the Normenausschuss Materialprfung (Materials Testing Standards Committee), Technical Committee NA 062-06-81 AA Gasfrmige und flssige Kraft- und Brennstoffe, Schmierstoffe und verwandte Produkte mit minerallstmmiger, synthet

5、ischer oder biologischer Herkunft of the Fachausschuss Minerall- und Brennstoffnormung (FAM). EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15486August 2007ICS 71.080.60English VersionEthanol as a blending component for petrol - Determination ofsulfur content - Ultraviolet fluorescence methodsou

6、fre - Mthode par fluorescence ultravioletteEthanol zur Verwendung als Blendkomponente inOttokraftstoff - Bestimmung des Schwefelgehaltes -Ultraviolettfluoreszenz-VerfahrenThis European Standard was approved by CEN on 30 June 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulati

7、ons which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This Europe

8、an Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the nationa

9、l standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and Unite

10、d Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15486:2007: Ethan

11、ol comme base de mlange lessence - Dosage duEN 15486:2007 (E) 2 Contents Page 1 Scope 4 2 Normative references 4 3 Principle4 4 Reagents and materials 4 4.1 Inert gas 4 4.2 Oxygen4 4.3 Solvent 5 4.4 Sulfur compounds .5 4.4.1 General5 4.5 Sulfur stock solution .5 4.6 Calibration standards5 4.7 Qualit

12、y control samples 6 4.8 Quartz wool 6 5 Apparatus .6 6 Sampling.7 7 Apparatus preparation 7 8 Apparatus calibration and verification 8 8.1 Multi-point calibration .8 8.2 One-point calibration.9 8.3 Verification .10 9 Procedure .10 10 Calculation11 10.1 Using multi-point calibration11 10.2 Using one-

13、point calibration 11 10.3 Calculation12 11 Expression of results 12 12 Precision.12 12.1 Repeatability, r .12 12.2 Reproducibility, R 13 13 Test report 13 Annex A (normative) Ethanol density .14 Foreword3 Bibliography 15EN 15486:2007 (E) 3 Foreword This document (EN 15486:2007) has been prepared by

14、Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by

15、endorsement, at the latest by February 2008, and conflicting national standards shall be withdrawn at the latest by February 2008. The method described in this document is based on EN ISO 20846 1. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followin

16、g countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloveni

17、a, Spain, Sweden, Switzerland and United Kingdom. EN 15486:2007 (E) 4 1 Scope This document specifies an ultraviolet (UV) fluorescence test method for the determination of the sulfur content of ethanol from 5 mg/kg to 20 mg/kg. Other products may be analysed and higher sulfur contents may be determi

18、ned according to this test method, however, no precision data for products other than ethanol and for results outside the specified range have been established for this document. Halogens interfere with this detection technique at concentrations above approximately 3 500 mg/kg. NOTE For the purposes

19、 of this document, the terms “% (m/m)” and “% (V/V)” are used to represent the mass fraction and the volume fraction of a material respectively. WARNING The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety pro

20、blems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. 2 Normative references The following referenced documents are indispensable for the app

21、lication of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 1042, Laboratory glassware one-mark volumetric flasks (ISO 1042:1998) EN ISO 3170, Petroleum liquids Manua

22、l sampling (ISO 3170:2004) 3 Principle An ethanol sample is directly injected into a UV fluorescence detector. The sample enters into a high temperature combustion tube (1 000 C to 1 100 C), where the sulfur is oxidized to sulfur dioxide (SO2) in an oxygen-rich atmosphere. Water produced during the

23、sample combustion is removed and the sample combustion gases are exposed to ultraviolet (UV) light. The SO2absorbs the energy from the UV light and is converted to excited sulfur dioxide (SO2*). The fluorescence emitted from the excited SO2* as it returns to a stable state SO2,is detected by a photo

24、multiplier tube and the resulting signal is a measure of the sulfur contained in the sample. CAUTION Exposure to excessive quantities of ultraviolet (UV) light is injurious to health. The operator must avoid exposing any part of his/her person, especially his/her eyes, to not only direct UV light bu

25、t also to secondary or scattered radiation that may be present. 4 Reagents and materials 4.1 Inert gas Argon or helium, high purity grade with a minimum purity of 99,998 % (V/V). 4.2 Oxygen High purity grade with a minimum purity of 99,75 % (V/V). CAUTION Vigorously accelerates combustion. EN 15486:

26、2007 (E) 5 4.3 Solvent 4.3.1 General Use either the solvent specified in 4.3.2 or 4.3.3 or a solvent similar to that occurring in the sample under analysis. Correction for sulfur contribution from solvents used in standard preparation and sample dilution is required. Alternatively, use of a solvent

27、with non-detectable sulfur contamination relative to the unknown sample makes the blank correction unnecessary. 4.3.2 Ethanol, reagent grade. 4.3.3 Toluene, (optional), reagent grade. CAUTION Flammable solvents. 4.4 Sulfur compounds 4.4.1 General Use compounds with a minimum purity of 99 % (m/m). Ce

28、rtified reference materials (CRMs) from accredited suppliers are suitable alternatives to the compounds listed in 4.4.2 to 4.4.4. 4.4.2 Dibenzothiophene (DBT), MW 184,26 g/mol with a nominal sulfur content of 17,399 % (m/m). 4.4.3 Dibutylsulfide (DBS), MW 146,29 g/mol with a nominal sulfur content o

29、f 21,915 % (m/m). 4.4.4 Thionaphthene (Benzothiophene) (TNA), MW 134,20 g/mol with a nominal sulfur content of 23,890 % (m/m). 4.5 Sulfur stock solution Prepare a stock solution of approximately 1 000 mg/l sulfur content by accurately weighing the appropriate quantity of sulfur compound (4.4) in a v

30、olumetric flask (5.9). Ensure complete dissolution with solvent (4.3). Calculate the sulfur concentration of the stock solution to the nearest 1 mg/l. This stock solution is used for the preparation of calibration standards. As an alternative procedure, a sulfur stock solution of approximately 1 000

31、 mg/kg can be prepared by accurately weighing the appropriate quantity of sulfur compound (4.4) in a volumetric flask (5.9) and reweighing the volumetric flask once it has been filled to the mark with the solvent (4.3). Take precautions to ensure that evaporation of the solvent and/or sulfur compoun

32、ds is not causing weighing errors. NOTE 1 The appropriate mass of sulfur compound described in 4.4.2 to 4.4.4 to add to the 100 ml flask is 0,574 8 g (DBT), 0,456 3 g (DBS) and 0,418 6 g (TNA). NOTE 2 The shelf life of the stock solution is approximately three months when stored at low temperature,

33、typically in a refrigerator. 4.6 Calibration standards Prepare the calibration standards by dilution of the stock solution (4.5) with the selected solvent (4.3). Calculate the exact sulfur content of each calibration standard. EN 15486:2007 (E) 6 Calibration standards with a known sulfur content in

34、milligrams per litre (or milligrams per kilogram) can be obtained with a volume/volume (or mass/mass, respectively) dilution of the stock solution at 1 000 mg/l (or milligrams per kilogram, respectively). Other practices are possible but these ones above avoid any density correction. NOTE New calibr

35、ation standards should be prepared on a regular basis depending upon the frequency of use and age. When stored at low temperature, typically in a refrigerator, the calibration standards, with sulfur content above 30 mg/kg (or mg/l), have a useful life of at least one month. Below this sulfur content

36、 (30 mg/kg), the shelf life should be reduced. 4.7 Quality control samples These are stable samples representative of the materials being analysed, that have a sulfur content that is known by this test method over a substantial period of time. Alternatively, there are standard materials with a certi

37、fied value commercially available. Ensure before use, that the material is within its shelf life. 4.8 Quartz wool Follow the manufacturers recommendations. 5 Apparatus 5.1 Furnace, comprising an electric device, capable of maintaining a temperature sufficient to pyrolyse all of the sample and oxidiz

38、e all sulfur to sulfur dioxide (SO2). It can be set either in a horizontal or vertical position. 5.2 Combustion tube, of quartz, constructed to allow the direct injection of the sample into the heated oxidation zone of the furnace (5.1). The combustion tube shall have side arms for the introduction

39、of oxygen and carrier gas. The oxidation section shall be large enough to ensure complete combustion of the sample. It can be set either in a horizontal or vertical position. 5.3 Flow controllers, capable of maintaining a constant supply of oxygen and carrier gas. 5.4 Vapour drier, capable of removi

40、ng water vapour formed during combustion prior to measurement by the detector (5.5). 5.5 UV fluorescence detector, a selective and quantitative detector capable of measuring UV light emitted from the fluorescence of excited sulfur dioxide. 5.6 Microlitre syringe, capable of accurately delivering bet

41、ween 5 l to 50 l quantities. Follow the manufacturers instructions for determining the length of the needle required. For vertical injection, syringes with a polytetrafluoroethylene (PTFE) plunger are recommended. 5.7 Sample inlet system, either positioned vertically or horizontally. It shall consis

42、t of a direct injection inlet system capable of allowing the quantitative delivery of the material to be analysed into an inlet carrier stream which directs the sample into the oxidation zone at a controlled and repeatable rate. A syringe drive mechanism, which discharges the sample from the microli

43、tre syringe at a constant rate of approximately 1 l/s maximum, is required. NOTE Boat injection systems may be used if they meet the performance requirements of clause 12. 5.8 Balance, capable of weighing with an accuracy of at least 0,1 mg. 5.9 Volumetric flasks, Class A one-mark volumetric flasks,

44、 conforming to EN ISO 1042, of appropriate capacities, including 100 ml, for the preparation of sulfur stock solution (4.5) and calibration standards (4.6). EN 15486:2007 (E) 7 Key 1 UV source 6 inert gas input 2 photomultiplier 7 gases output 3 output signal 8 drier 4 1 000 C to 1 100 C 9 quartz tu

45、be 5 oxygen input 10 microlitre syringe Figure 1 Synopsis of the apparatus 6 Sampling Unless otherwise specified, laboratory samples shall be obtained by the procedures described in EN ISO 3170. High density polyethylene containers shall be used. The containers should be carefully cleaned and rinsed

46、 with pure water to avoid contamination. Samples should be analysed as soon as possible after removal from bulk supplies, to prevent loss of sulfur. Thoroughly mix samples in their containers immediately prior to withdrawal of the test portions. CAUTION Samples that are collected at temperatures bel

47、ow room temperature can undergo expansion and rupture the container. For such samples, do not fill the container to the top; leave sufficient air space above the sample to allow room for expansion. 7 Apparatus preparation 7.1 Assemble the apparatus and check for leaks according to the manufacturers

48、instructions. 7.2 Adjust the inlet pressure and flow rate of each gas according to the manufacturers instructions. 7.3 Refer to the manufacturers instructions to set the temperature of the furnace (5.1) high enough to ensure all sulfur pyrolysis and oxidation, typically 1 100 C in the case of a one

49、temperature zone furnace or 750 C for pyrolysis, and 1 000 C to 1 100 C for oxidation in the case of a two zone temperature furnace. 7.4 Adjust the instrument sensitivity and baseline stability, and perform instrument blanking procedures following the manufacturers guidelines. Ensure that the UV light is stable before measurement. NOTE For the UV light, a warm up time of at least 30 min is usually required. EN 15486:2007 (E) 8 8 Apparatus calibration and verification 8.1 Multi-point calibration 8.1.1 Prepare a series of calibration