DIN EN 15380-4-2013 Railway applications - Classification system for railway vehicles - Part 4 Function groups German version EN 15380-4 2013《轨道交通 铁路车辆的分类系统 第4部分 功能组 德文版本EN 15380-4.pdf

《DIN EN 15380-4-2013 Railway applications - Classification system for railway vehicles - Part 4 Function groups German version EN 15380-4 2013《轨道交通 铁路车辆的分类系统 第4部分 功能组 德文版本EN 15380-4.pdf》由会员分享，可在线阅读，更多相关《DIN EN 15380-4-2013 Railway applications - Classification system for railway vehicles - Part 4 Function groups German version EN 15380-4 2013《轨道交通 铁路车辆的分类系统 第4部分 功能组 德文版本EN 15380-4.pdf（104页珍藏版）》请在麦多课文档分享上搜索。

1、May 2013 Translation by DIN-Sprachendienst.English price group 31No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 01

2、.110; 45.060.01!%#e0“2006613www.din.deDDIN EN 15380-4Railway applications Classification system for railway vehicles Part 4: Function groups;English version EN 15380-4:2013,English translation of DIN EN 15380-4:2013-05Bahnanwendungen Kennzeichnungssystematik fr Schienenfahrzeuge Teil 4: Funktionsgru

3、ppen;Englische Fassung EN 15380-4:2013,Englische bersetzung von DIN EN 15380-4:2013-05Applications ferroviaires Systme de classification pour vhicules ferroviaires Partie 4: Groupes des fonctions;Version anglaise EN 15380-4:2013,Traduction anglaise de DIN EN 15380-4:2013-05www.beuth.deDocument compr

4、ises 104 pagesIn case of doubt, the German-language original shall be considered authoritative.04.13DIN EN 15380-4:2013-05 2 A comma is used as the decimal marker. National foreword This document (EN 15380-4:2013) has been prepared by Technical Committee CEN/TC 256 “Railway applications” (Secretaria

5、t: DIN, Germany), Working Group WG 19 “Classification systems and documentation” (Chairmanship: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Fahrweg und Schienenfahrzeuge (Railway Standards Committee), Working Committee NA 087-00-09 AA Terminologie,

6、Technische Dokumentation, Datenaustausch. This standard is based on the English reference version. Table E.1 has not been translated into German because it contains a list of functions in English and their abbreviations, in accordance with the “FBS” (Functional Breakdown Structure), that have become

7、 widely established internationally and do not require translation. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15380-4 January 2013 ICS 01.110; 45.060.01 English Version Railway applications - Classification system for railway vehicles -Part 4: Function groups Applications ferroviaires - S

8、ystme de classification pour vhicules ferroviaires - Partie 4: Groupes des fonctions Bahnanwendungen - Kennzeichnungssystematik fr Schienenfahrzeuge - Teil 4: Funktionsgruppen This European Standard was approved by CEN on 3 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal

9、 Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

10、 member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versio

11、ns. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Po

12、land, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any for

13、m and by any means reserved worldwide for CEN national Members. Ref. No. EN 15380-4:2013: EEN 15380-4:2013 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .54 Symbols and abbreviations 85 Functional structure 95.1 General remarks.95.2 Classificat

14、ion system used for functions .95.3 Code letters . 105.3.1 Code letters used to designate first level function groups 105.3.2 Code letters used to designate function groups from the first to the third level 115.4 Transverse functions . 38Annex A (informative) Functions on level 4 and level 5 . 40Ann

15、ex B (informative) Interrelation between EN 15380-2 and EN 15380-4 . 65Annex C (informative) Code letters used to designate detail properties . 67Annex D (informative) Rules to define the function level . 70Annex E (informative) Rules to create function names 71E.1 General . 71E.2 Function terms 71E

16、.3 Rules for creating function short names . 71Bibliography . 102Figures Figure 1 Precept of function group indication . 10 Figure B.1 Interrelation between Function Breakdown Structure according to EN 15380-4 and Product Breakdown Structure according to EN 15380-2 . 66 Tables Table 1 Overview of 1s

17、t level functions. 11 Table 2 Listing of the level functions from the 1stlevel to the 3rdlevel 12 Table 3 Listing of the transverse functions and their levelling 38 Table A.1 Functions on level 4 and level 5 . 40 Table C.1 Classification of detail properties 68 Table E.1 List of function abbreviatio

18、ns 73 DIN EN 15380-4:2013-05 EN 15380-4:2013 (E) 3 Foreword This document (EN 15380-4:2013) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publicat

19、ion of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not

20、 be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This series of European Standards “Railway applications Classification system for railway vehicles“ con

21、sists of the following parts: Part 1: General principles; Part 2: Product groups; Part 3: Designation of installation sites and locations; Part 4: Function groups (the present document); Part 5: Systems, System groups System requirements. According to the CEN/CENELEC Internal Regulations, the nation

22、al standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithu

23、ania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 15380-4:2013-05 EN 15380-4:2013 (E) 4 Introduction The Functional Breakdown Structure is used by all parties involved in the rolling stock pr

24、oduct definition phase and the following processes to structure the functional requirements and use cases according to a standardized list of functions. It starts with the concept and spreads across the whole product life cycle. During this period, the level of detail of the structure could be adapt

25、ed according to the project progress. This means that functions in a product concept catalogue mainly are described by requirements. The transfer into implementable hardware and software takes place later. The Product Breakdown Structure (PBS) shown in EN 15380-2 and the Functional Breakdown Structu

26、re (FBS) shown in EN 15380-4 complement each other. While the PBS, consisting of the standardized list of subsystems and devices, is used for structuring system requirements and related use cases, the FBS standard describes the functions of a vehicle and is used to obtain a correlation between funct

27、ional requirements and the structure of functions and the related use cases. These structures describe different views on the rolling stock product. The importance of the two structures may be different according to the users tasks as well the project stage (see also EN 15380-1:2006, Annex C). The F

28、BS can also be used for specifying tasks as well as for analysing tasks. The functional assessment supports the whole engineering process and the field of RAMS/LCC (Reliability, Availability, Maintainability, Safety/Life-Cycle Costs). Often during the project process RAMS/LCC values have to be given

29、 at a stage when insufficient information regarding the technical solution is available. (At this stage of a project, EN 15380-2 is not applicable.) In all cases in which functionality is a key issue (e.g. safety and reliability analyses, inspections and testing, maintenance programmes, field data a

30、cquisition and related documentation), communication is based on a functional vehicle structure composed of functional groups particularly when cross-system or interdisciplinary considerations are important. Functions are grouped into levels regardless of their vehicle specific technical realisation

31、. Hence the function groups and function descriptions were developed without considering how each function may be achieved in practice. This is consistent with the EN 81346 series. This also applies when the functional vehicle breakdown structure is met in tracing vehicle properties, for example dur

32、ing the validation phase. Many of the required properties fixed in the product concept catalogue are realised, diagnosed and rated as functioning or malfunctioning during operation. Only afterwards is the link made to the physical structure and then to the assessment of the function of technical sol

33、utions. There is not necessarily a simple one to one relationship between each function and its technical realisation. A system or item of equipment can contribute to different functions at the same time or in sequence. This means that an entity can be related to different functions and even from di

34、fferent levels (see Annex A). Assignment of examples for well known function carriers are given for easier understanding. DIN EN 15380-4:2013-05 EN 15380-4:2013 (E) 5 1 Scope This European Standard is concerned with the functions associated with general railway vehicles or their assemblies. It cover

35、s functionality associated with systems and equipment such as wheelsets and bogies, doors, brakes and traction. This standard may also be applied to railway vehicles with very specific functions like track machines and snow ploughs. However, while the functions that are common with general railway v

36、ehicles are included, the functions which are specific to their work processes are not included in this standard. They will be added for these individual projects. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable f

37、or its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15663, Railway applications Definition of vehicle reference masses 3 Terms and definitions For the purposes of this d

38、ocument, the following terms and definitions apply. 3.1 function specific purpose or objective to be accomplished, that can be specified or described without reference to the physical means of achieving it SOURCE: IEC 61226:2009 Note 1 to entry: A function transfers (considered as a black-box) input

39、 parameters (material, energy, information) into aim related output parameters (material, energy, information) performed by technical means and/or human beings. 3.2 transverse function sub function which may apply to more than one higher level function Note 1 to entry: For example, providing diagnos

40、tics or displaying information. 3.3 Functional Breakdown Structure (FBS) hierarchical structure summarising a set of functions leading to the same general focus or service Note 1 to entry: To define the level of a function within a FBS, see Clause 5. 3.4 function level level of group functions of eq

41、ual purpose Note 1 to entry: Assignment to the appropriate level is described in the rules. 3.4.1 1stlevel function functional domain or general focus or service for the considered (rolling stock) system DIN EN 15380-4:2013-05 EN 15380-4:2013 (E) 6 Note 1 to entry: In general, the first level functi

42、on encompasses a set of functions related to a same general focus or service for the considered (rolling stock) system. EXAMPLE Provide appropriate conditions to passengers, train crew and load. 3.4.2 2ndlevel function main function which contributes to complete the first level Note 1 to entry: In g

43、eneral, the 2ndlevel function encompasses a set of sub functions and contributes to the completion of the first level. Note 2 to entry: If the next level of the functional domain is not related to a main function there could be a direct relation to a lower level function. 3.4.3 3rdlevel function sub

44、 function which contributes to complete the 2ndlevel Note 1 to entry: In general, the 3rdlevel function encompasses a set level 4 functions (usually tasks) and contributes to the completion of the second level. Note 2 to entry: If the next level of the main function is not related to a sub function

45、there could be a direct relation to a lower level function. 3.4.4 4thlevel function function related to a task which contributes to complete the third level Note 1 to entry: In general, the 4thlevel function encompasses a set of level 5 functions (usually activities) and contributes to the completio

46、n of the third level. Note 2 to entry: If the next level of the sub function is not related to a task there could be a direct relation to lower level function (activity). 3.4.5 5thlevel function function related to an activity necessary for performing the 4thlevel function 3.5 requirement necessary

47、condition or ability to constrain the solutions of a task or an aim Note 1 to entry: A requirement describes for example, performance characteristics, operational conditions and quality attributes, expressed as measurable and testable technical parameters or indicators. Note 2 to entry: Requirements

48、 are usually summarised in a specification. Note 3 to entry: Beside requirements allocated to functions are additional requirements allocated to other features (e.g. design, manufacturing). 3.5.1 functional requirements specific need or capability of a FBS function Note 1 to entry: Functional requir

49、ements and use cases first come from passenger/payload and operator requests. Later in the engineering process, functional requirements from integrators and suppliers are added. They express the requirements on a certain functionality given in the FBS regarding interoperability (with other functions), safety, operation, function/behaviour, or functional architecture/design constraints. The functional designation is usually stated more precisely by detail properties (see also Annex D) that