DIN EN 15037-3-2011 Precast concrete products - Beam-and-block floor systems - Part 3 Clay blocks German version EN 15037-3 2009+A1 2011《预制混凝土产品 梁和砌块式地板系统 第3部分 粘土砌块 德文版本EN 15037-3-.pdf
《DIN EN 15037-3-2011 Precast concrete products - Beam-and-block floor systems - Part 3 Clay blocks German version EN 15037-3 2009+A1 2011《预制混凝土产品 梁和砌块式地板系统 第3部分 粘土砌块 德文版本EN 15037-3-.pdf》由会员分享,可在线阅读,更多相关《DIN EN 15037-3-2011 Precast concrete products - Beam-and-block floor systems - Part 3 Clay blocks German version EN 15037-3 2009+A1 2011《预制混凝土产品 梁和砌块式地板系统 第3部分 粘土砌块 德文版本EN 15037-3-.pdf(42页珍藏版)》请在麦多课文档分享上搜索。
1、July 2011 Translation by DIN-Sprachendienst.English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 9
2、1.100.30!$sAu“1803082www.din.deDDIN EN 15037-3Precast concrete products Beam-and-block floor systems Part 3: Clay blocks (includes Amendment A1:2011)English translation of DIN EN 15037-3:2011-07Betonfertigteile Balkendecken mit Zwischenbauteilen Teil 3: Keramische Zwischenbauteile (enthlt nderung A1
3、:2011)Englische bersetzung von DIN EN 15037-3:2011-07Produits prfabriqus en bton Systmes de planchers poutrelles et entrevous Partie 3: Entrevous en terre cuite (Amendement A1:2011 inclus)Traduction anglaise de DIN EN 15037-3:2011-07Partially supersedesDIN 4159:1999-10,DIN 4159 DIN 4160:2000-04See s
4、tart of applicationwww.beuth.deDocument comprises 42 pagesIn case of doubt, the German-language original shall be considered authoritative.Corrigendum 1:2000-06 and06.11 DIN EN 15037-3:2011-07 2 A comma is used as the decimal marker. Start of application The start of application of this standard is
5、due to be 1 November 2011. DIN 4159:1999-10, DIN 4159 Corrigendum 1:2006-06 and DIN 4160:2000-4 may be used in parallel until 30 April 2012 (see deadline in the EU Official Journal). It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this stand
6、ard has been listed in the Bundesanzeiger (German Federal Gazette) and from the date given therein. National foreword This standard has been prepared by Technical Committee CEN/TC 229 “Precast concrete products” (Secretariat: AFNOR, France). The responsible German body involved in its preparation wa
7、s the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-06-14 AA Deckenziegel. This document includes EN 15037-3:2009 and Amendment A1:2011. However, due to a number of errors, the 2009 version of this standard was not published in Germany. These
8、 errors are now corrected by Amend-ment A1:2011 which includes further updates of Clauses 4, 5 and Annex ZA. Amendments This standard differs from DIN 4159:1999-10, DIN 4159 Corrigendum 1:2006-06 and DIN 4160:2000-4 as follows: a) clay blocks are now harmonized at the European level; b) conditions f
9、or CE marking have been established; c) Amendment 1:2011 has been incorporated; d) normative references relating to acoustics and resistance to fire have been updated; e) the subclauses relating to the test report and interpretation of test results have been revised. Previous editions DIN 4159: 1943
10、-05, 1962-02, 1972-10, 1978-04, 1999-10 DIN 4159 Corrigendum 1: 2000-06 DIN 4160: 1943x-05, 1962-02, 1978-08, 2000-04 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15037-3:2009+A1 February 2011 ICS 91.100.30 Supersedes EN 15037-3:2009English Version Precast concrete products - Beam-and-block
11、floor systems - Part 3: Clay blocks Produits prfabriqus en bton - Systmes de planchers poutrelles et entrevous - Partie 3: Entrevous en terre cuiteBetonfertigteile - Balkendecken mit Zwischenbauteilen - Teil 3: Keramische Zwischenbauteile This European Standard was approved by CEN on 25 January 2009
12、 and includes Amendment 1 approved by CEN on 10 January 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refe
13、rences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CE
14、N member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ic
15、eland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Aven
16、ue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15037-3:2009+A1:2011: EEN 15037-3:2009+A1:2011 (E) 2 Contents Page The numbering of clauses is strictly related to EN 13369:2004 Common rules for pr
17、ecast concrete products, at least for the first three digits. When a clause of EN 13369:2004 is not relevant or included in a more general reference of this standard, its number is omitted and this may result in a gap on numbering. Foreword 4Introduction .61 Scope 72 Normative references 73 Terms an
18、d definitions .84 Requirements 114.1 Material requirements 114.2 Production requirements . 114.3 Finished product requirements . 114.3.1 Geometrical properties 114.3.2 Surface characteristics 144.3.3 Mechanical resistance 154.3.4 Resistance and reaction to fire . 164.3.5 Acoustic properties 164.3.6
19、Thermal properties . 174.3.7 Durability . 174.3.8 Other requirements. 175 Test methods . 185.1 Measuring of dimensions and surface characteristics 185.1.1 Block dimensions . 185.1.2 Width and depth of the nib 195.1.3 Thickness of the top flange of resisting and semi-resisting blocks . 205.1.4 Percen
20、tage of voids of the top flange of resisting blocks . 205.1.5 Flatness of the underside 205.1.6 Straightness of the nib edges . 205.1.7 Surface characteristics 205.2 Mechanical strength . 205.2.1 Resistance to concentrated loads 205.2.2 Bending strength 225.2.3 Longitudinal compression test for resi
21、sting and semi-resisting clay blocks 245.2.4 Transverse testing of resisting and semi-resisting clay blocks 266 Evaluation of conformity 276.1 General . 276.2 Initial type tests . 286.3 Factory production control 286.3.1 General . 286.3.2 Finished product test . 287 Marking 288 Technical documentati
22、on 28Annex A (normative) Sampling for initial type testing and for independent testing of consignments 29A.1 General . 29A.2 Sampling procedure . 29DIN EN 15037-3:2011-07 EN 15037-3:2009+A1:2011 (E) 3 A.2.1 Random sampling . 29A.2.2 Representative sampling 29A.2.3 Dividing the sample . 30A.2.4 Numbe
23、r of blocks required per test . 30Annex B (normative) Inspection schemes for clay blocks . 31Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 33ZA.1 Scope and relevant characteristics . 33ZA.2 Procedure for attestation of
24、conformity of clay blocks for beam-and-block floor systems . 35ZA.2.1 System of attestation of conformity 35ZA.2.2 EC Certificate and Declaration of conformity . 35ZA.3 CE marking and labelling 36ZA.3.1 General . 36ZA.3.2 Simplified label 37ZA.3.3 Information to be provided with the CE marking . 38B
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DINEN1503732011PRECASTCONCRETEPRODUCTSBEAMANDBLOCKFLOORSYSTEMSPART3CLAYBLOCKSGERMANVERSIONEN1503732009A12011
链接地址:http://www.mydoc123.com/p-667871.html