DIN EN 14619-2015 Roller sports equipment - Kick scooters - Safety requirements and test methods German version EN 14619 2015《滚轮运动设备 脚蹬踏板车 安全要求和试验方法 德文版本EN 14619-2015》.pdf

《DIN EN 14619-2015 Roller sports equipment - Kick scooters - Safety requirements and test methods German version EN 14619 2015《滚轮运动设备 脚蹬踏板车 安全要求和试验方法 德文版本EN 14619-2015》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 14619-2015 Roller sports equipment - Kick scooters - Safety requirements and test methods German version EN 14619 2015《滚轮运动设备 脚蹬踏板车 安全要求和试验方法 德文版本EN 14619-2015》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、June 2015Translation by DIN-Sprachendienst.ICS 97.220.40DDIN EN 14619Roller sports equipment Kick scooters Safety requirements and test methods;English version EN 14619:2015,English translation of DIN EN 14619:2015-06Rollsportgerte Kick-Scooter Sicherheitstechnische Anforderungen und Prfverfahren;En

2、glische Fassung EN 14619:2015,Englische bersetzung von DIN EN 14619:2015-06quipement de sports roulettes Trottinettes Exigences de scurit et mthodes dessai;Version anglaise EN 14619:2015,Traduction anglaise de DIN EN 14619:2015-06SupersedesDIN EN 14619:2005-03In case of doubt, the German-language or

3、iginal shall be considered authoritative.Document comprises 24 pagesEnglish price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Stan

4、dards (DIN-Normen).!%CDv“2323383www.din.dewww.beuth.de 05.15 DIN EN 14619:2015-06 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2015-06-01. National foreword This standard includes safety requirements within the meaning of the Produktsiche

5、rheitsgesetz (ProdSG) (German Product Safety Act). This document (EN 14619:2015) has been prepared by Technical Committee CEN/TC 136 “Sports, play-ground and other recreational facilities and equipment”, Working Committee WG 10 “Roller sports equipment” (Secretariat: DIN, Germany). The responsible G

6、erman body involved in its preparation was the DIN-Normenausschuss Sport- und Freizeit-gert (DIN Standards Committee Sports Equipment), Working Committee NA 112-01-07 AA Rollsportgerte. Where this standard has been identified by the Ausschuss fr Produktsicherheit (German Committee for Product Safety

7、) and reference to it has been published in the Gemeinsames Ministerialblatt (German Joint Ministerial Gazette) by the Bundesanstalt fr Arbeitsschutz und Arbeitsmedizin (BAuA) (German Federal Institute for Occupational Safety and Health), it is to be presumed that kick scooters which comply with thi

8、s standard fulfil the relevant health and safety requirements. The DIN Standard corresponding to the International Standard referred to in this document is as follows: EN 22768-1 DIN ISO 2768-1 Amendments This standard differs from DIN EN 14619:2005-03 as follows: a) the scope has been changed; b) a

9、 classification of kick scooters has been added and the requirements have been modified accordingly; c) the requirement that the ends of the handles shall be covered has been added; d) requirements for the marking on the kick scooter have been modified; e) a requirement for the marking with the maxi

10、mum weight has been added; f) Annex A (informative) “Environmental aspects” has been added; g) the Bibliography has been updated. Previous editions DIN EN 14619: 2005-03 DIN EN 14619:2015-06 3 National Annex NA (informative) Bibliography DIN ISO 2768-1, General tolerances Tolerances for linear and a

11、ngular dimensions without individual tolerance indications DIN EN 14619:2015-06 4 This page is intentionally blank EN 14619 April 2015 ICS 97.220.40 Supersedes EN 14619:2004English Version Roller sports equipment - Kick scooters - Safety requirements and test methods quipement de sports roulettes -

12、Trottinettes - Exigences de scurit et mthodes dessai Rollsportgerte - Kick-Scooter - Sicherheitstechnische Anforderungen und Prfverfahren This European Standard was approved by CEN on 7 February 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condi

13、tions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists

14、 in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national stand

15、ards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slo

16、venia, Spain, Sweden, Switzerland, Turkey and United Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14619:2015 EEUROPEAN COMMITTEE FOR STANDARDIZATIONC

17、OMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14619:2015 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Construction .4 4.1 General 4 4.2 Classification of kick scooters .6 4.3 Requirements

18、 .6 5 Test methods 8 5.1 General 8 5.2 Order of tests .8 5.3 Wheel adhesion test 9 5.4 Handlebar ends impact test . 10 5.5 Static load test 10 5.6 Drop test 11 5.7 Impact against front wheel 12 5.8 Endurance test 13 5.9 External finish . 15 6 Marking 15 6.1 On the kick scooter. 15 6.2 On the package

19、 . 16 7 Information supplied by the manufacturer 16 7.1 General . 16 7.2 Instructions for use 16 7.3 Servicing and maintenance instructions . 17 Annex A (informative) Environmental aspects 18 Bibliography . 20 DIN EN 14619:2015-06EN 14619:2015 (E) 3 Foreword This document (EN 14619:2015) has been pr

20、epared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest

21、 by October 2015, and conflicting national standards shall be withdrawn at the latest by October 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all suc

22、h patent rights. This document supersedes EN 14619:2004. In relation to EN 14619:2004 the following main amendments have been made: a) the Scope has been changed; b) classification of kick scooters has been added and the requirements have been modified accordingly; c) requirement that the ends of th

23、e handles shall be covered has been added; d) requirements for the marking on the kick scooter have been modified; e) requirement for the marking on the packing the maximum weight has been added; f) an informative annex regarding environmental aspects has been added; g) a Bibliography has been added

24、. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, G

25、ermany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 14619:2015-06EN 14619:2015 (E) 4 1 Scope This European Standard applies to kic

26、k scooters which can only be propelled by the muscular activity of a user with a body mass of more than 20 kg and less than 100 kg. It specifies safety requirements, test methods, marking and information supplied by the manufacturer to reduce the risk of injuries to both third parties and the user d

27、uring normal use. Kick scooters for use by users of less than 20 kg do not belong to the scope of this European Standard. They are toys. It should be noted that there are two types of scooters for the weight group 20 kg to 50 kg those classified as sports equipment for use on public roads and path w

28、ays (this European Standard) and those classified as toys for domestic use (according to EN 71-1). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited

29、applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 71-1:2014, Safety of toys Part 1: Mechanical and physical properties EN 22768-1, General tolerances Part 1: Tolerances for linear and angular dimensions without individual tolerance

30、indications (ISO 2768-1) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 kick scooter ride-on equipment comprising at least one deck, at least two wheels of any size, a vertical element to grasp and a mechanism for steering, intended for flat

31、, clean and dry surfaces 3.2 sliding mechanism sliding components that can be used to vary the height of the steering column or the length of the deck 4 Construction 4.1 General General tolerances: EN 22768-1 v Unless stated otherwise, accuracy tolerances based on the nominal values shall be as foll

32、ows: Forces and torques 0/+5 % Masses and weights 1 % DIN EN 14619:2015-06EN 14619:2015 (E) 5 Time duration 5 s Temperatures 2 C Typical components of kick scooters are illustrated in Figure 1. NOTE 1 Figure 1 shows only examples for reference. Key 1 handlebar 9 brake 2 hand grip 10 deck 3 plug 11 d

33、eck grip 4 clamp 12 wheel 5 clamp 13 axle 6 steering column 14 folding mechanism 7 clamp 15 wheel support system 8 head tube 16 joy stick a) Example 1 b) Example 2 Figure 1 Typical components of kick scooters NOTE 2 Restrictions on the marketing and use of certain dangerous substances and preparatio

34、ns are addressed in the Regulation (EC) No. 1907/2006. DIN EN 14619:2015-06EN 14619:2015 (E) 6 4.2 Classification of kick scooters 4.2.1 Class A Kick scooters intended for use by a user mass of more than 20 kg up to 100 kg. 4.2.2 Class B Kick scooters intended for use by a user mass of more than 20

35、kg up to 50 kg. The maximum height of the steering column is 80 cm. 4.3 Requirements 4.3.1 Protruding components and edges All protruding components and edges on the kick scooter that can come into contact with body parts during normal use shall be deburred or constructed in such a way as to prevent

36、 injury. The test shall be carried out according to 5.8. Rigid and protruding parts that may cause entrapment or injuries shall be protected. This protection shall not come loose during tests performed according to Clause 5. The ends of the handles shall be covered. To prevent from injuries, ends of

37、 handlebar have to withstand the test according to 5.4, Figure 3, and remain free of sharp edges. 4.3.2 Parts moving against each other 4.3.2.1 General The requirements specified in 4.3.2.2 to 4.3.2.5 shall be tested according to 5.8. 4.3.2.2 Distance between the parts 4.3.2.2.1 General Below requir

38、ements do not have to be considered if the customer acts intentionally close to and directly on the component and hurts himself. Then the injury would be caused by his own strength and could be stopped by himself immediately. 4.3.2.2.2 Class A The distance between accessible moveable parts shall be

39、either smaller than 5 mm or wider than 18 mm in any position. This requirement does not apply to the wheels/spokes/wheel support system or the braking/rear brake system, if provided. 4.3.2.2.3 Class B a) The space between moving elements, capable of injuring fingers, shall also allow a 12 mm rod to

40、be inserted if it allows a 5 mm rod to be inserted. b) Accessible openings in moving elements capable of shearing a finger shall not allow the insertion of a 5 mm rod. This requirement does not apply to the wheels/spokes/wheel support system or the braking/rear brake system, if provided. DIN EN 1461

41、9:2015-06EN 14619:2015 (E) 7 4.3.2.3 Folding mechanism Any folding mechanism shall be designed to fix the kick scooter for use in a simple, rigid and safe way. It shall resist all tests without damage. Fixing components should not have contact with the front wheel in any position. An inadvertent unl

42、ocking of the mechanism shall be impossible. If the distance as specified in 4.3.2.2 is not met, other designs to protect the user from unintentional injuries shall be provided. 4.3.2.4 Sliding mechanism others than the steering system Sliding mechanisms shall be protected against unintentional open

43、ing or collapse during normal use. 4.3.2.5 Springs Springs shall not be accessible if the gap between two consecutive spirals or turns allows a 5 mm diameter rod to be inserted on a 10 mm depth. 4.3.3 Steering system The steering system shall be constructed: a) to avoid contact between wheels and ot

44、her parts of the kick scooter during usual riding; b) that the length adjustment fixing avoids unintentional opening; 1) For class B, the height shall be adjustable with the use of a tool or have at least one main locking device and one secondary locking device of which at least one shall automatica

45、lly be engaged when the height is adjusted. c) that the steering column, if it is sliding, shall be adjusted for height, and have a permanent mark that indicates the minimum insertion depth of the column; this mark shall be positioned at a distance equivalent to and not less than two and a half time

46、s the diameter of the column and shall not affect its strength; d) that the end of the handlebar is equipped with hand grips or plugs, which withstand a tensile load of 70 N in the loosening direction. When tested according to Clause 5, there shall be no break or functional damage of the steering sy

47、stem. 4.3.4 Deck The deck shall resist all tests specified in Clause 5 without any functional damage. It shall be equipped with an anti-slide surface with an area of at least 200 cm2. 4.3.5 Bearings The bearings shall be designed in such a way as to be functional after performing all the tests accor

48、ding to Clause 5. They shall be constructed in such a way as to permit servicing according to the information supplied by the manufacturer without impairment of their operational safety. 4.3.6 Axles The axles shall be attached and designed in such a way as to ensure that they cannot become loose, di

49、splaced or deformed during use. The wheels shall be secured on the axles against unintentional loosening. These requirements are considered to be fulfilled if the axles are not loosened, deformed or displaced to such DIN EN 14619:2015-06EN 14619:2015 (E) 8 an extent as to impair proper functioning, and the wheels have not become loose after the tests according to Clause 5. 4.3.7 Wheels The wheels shall be constructed from non-slip material.