DIN EN 14387-2008 Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements testing marking(includes Amendment A1 2008) English version of DIN EN 14387 2.pdf

《DIN EN 14387-2008 Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements testing marking(includes Amendment A1 2008) English version of DIN EN 14387 2.pdf》由会员分享，可在线阅读，更多相关《DIN EN 14387-2008 Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements testing marking(includes Amendment A1 2008) English version of DIN EN 14387 2.pdf（27页珍藏版）》请在麦多课文档分享上搜索。

1、May 2008DEUTSCHE NORM English price group 13No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.340.30!$NBS“1433148www.

2、din.deDDIN EN 14387Respiratory protective devices Gas filter(s) and combined filter(s) Requirements, testing, marking (includes Amendment A1:2008)English version of DIN EN 14387:2008-05Atemschutzgerte Gasfilter und Kombinationsfilter Anforderungen, Prfung, Kennzeichnung (enthlt nderung A1:2008)Engli

3、sche Fassung DIN EN 14387:2008-05SupersedesDIN EN 14387:2004-05www.beuth.deDocument comprises 27 pagesDIN EN 14387:2008-05 2 National foreword This standard has been prepared by Technical Committee CEN/TC 79 “Respiratory protective devices” (Secretariat: DIN, Germany). The responsible German body in

4、volved in its preparation was the Normenausschuss Feinmechanik und Optik (Optics and Precision Mechanics Standards Committee), Working Group NA 027-02-04-01 AK Filter und Absorptionsgerte. Amendments This standard differs from DIN EN 14387:2004-05 as follows: a) Filters for single use only are now c

5、lassified. Previous editions DIN 3181: 1931-09; 1936-11; 1948-01; 1957x-09; 1973-02 DIN 3181-1: 1980-03; 1980-05 DIN 3181-4: 1988-07 DIN EN 141: 1991-06; 2000-05 DIN EN 371: 1992-05 DIN EN 372: 1992-05 DIN EN 14387: 2004-05 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14387:2004+A1 January 2

6、008 ICS 13.340.30 Supersedes EN 14387:2004 English Version Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking Appareils de protection respiratoire - Filtres anti-gaz et filtres combins - Exigences, essais, marquage Atemschutzgerte - Gasfilter und K

7、ombinationsfilter - Anforderungen, Prfung, Kennzeichnung This European Standard was approved by CEN on 10 December 2003 and includes Corrigendum 1 issued by CEN on 8 December 2004 and includes Amendment 1 approved by CEN on 5 December 2007. CEN members are bound to comply with the CEN/CENELEC Intern

8、al Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN membe

9、r. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN member

10、s are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Sw

11、itzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref.

12、 No. EN 14387:2004+A1:2008: EEN 14387:2004+A1:2008 (E) 2 Contents Foreword4 1 Scope 6 2 Normative references 6 3 Terms and definitions .6 4 Description .7 5 Classification7 5.1 Types of filters .7 5.1.1 Gas filters .7 5.1.2 Multi-type gas filters7 5.1.3 Combined filters.7 5.1.4 Special filters7 5.2

13、Classes of filters 8 6 Requirements.8 6.1 General8 6.2 Ergonomics 8 6.3 Design .8 6.4 Materials .8 6.5 Mass 9 6.6 Connection .9 6.7 Multiple filters.9 6.8 Packaging .9 6.9 Mechanical strength (M.S.) .10 6.10 Temperature conditioning (T.C.) 10 6.11 Breathing resistance .10 6.12 Gas capacity.12 6.12.1

14、 General12 6.12.2 Types A, B, E, K, AX and special filters.13 6.12.3 Type SX.14 6.13 Combined filters.15 6.13.1 General15 6.13.2 Filter penetration15 6.14 Clogging (optional)15 6.14.1 General15 6.14.2 Filter penetration15 6.14.3 Breathing resistance .15 7 Testing 16 7.1 General16 7.2 Nominal values

15、and tolerances 16 7.3 Visual inspection .16 7.4 Mechanical strength (M.S.) .16 7.4.1 Test equipment 16 7.4.2 Test procedure.16 7.5 Temperature conditioning (T.C.) 17 7.6 Test flow conditions 17 7.6.1 General17 7.6.2 Multiple filters.17 DIN EN 14387:2008-05 Page EN 14387:2004+A1:2008 (E) 3 7.7 Breath

16、ing resistance .17 7.8 Gas capacity 18 7.8.1 General .18 7.8.2 Filters Type A, B, E and K.18 7.8.3 Filters Type AX 18 7.8.4 Special filters .18 7.8.5 Filters Type SX.18 7.9 Filter penetration .19 8 Marking.19 8.1 General .19 8.2 Filters19 8.3 Filter package 21 9 Information supplied by the manufactu

17、rer .21 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives25 DIN EN 14387:2008-05 EN 14387:2004+A1:2008 (E) 4 Foreword This document (EN 14387:2004+A1:2008) has been prepared by Technical Committee CEN/TC 79 “Respiratory pr

18、otective devices”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2007 and conflicting national standards shall be withdrawn at the latest by July 20

19、07. This document includes Amendment 1, approved by CEN on 2007-12-05. This document supersedes !EN 14387:2004“. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. The modifications of the related CEN Corrigendum have been implemented at the appropr

20、iate places in the text and are indicated by the tags . This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Anne

21、x ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, G

22、ermany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 14387:2008-05 EN 14387:2004+A1:2008 (E) 5 Introduction A given respiratory protective devi

23、ce can only be approved when the individual components satisfy the requirements of the test specification which may be a complete standard or part of a standard and practical performance tests have been carried out successfully on complete apparatus where specified in the appropriate standard. If fo

24、r any reason a complete apparatus is not tested then simulation of the apparatus is permitted provided the respiratory characteristics and mass distribution are similar to those of the complete apparatus. DIN EN 14387:2008-05 EN 14387:2004+A1:2008 (E) 6 1 Scope This European Standard refers to gas f

25、ilters and combined filters for use as components in unassisted respiratory protective devices. Filters for use against CO are excluded from this standard. Laboratory tests are included for the assessment of compliance with the requirements. Some filters complying with this standard can also be suit

26、able for use with assisted respiratory protective devices and if so they need to be tested be tested and marked according to the appropriate European Standard. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normativ

27、e references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated referen

28、ces the latest edition of the publication referred to applies (including amendments). EN 132:1998, Respiratory protective devices Definitions of terms and pictograms. EN 134:1998, Respiratory protective devices Nomenclature of components. EN 143, Respiratory protective devices Particle Filters - Req

29、uirements, testing, marking. EN 148-1, Respiratory protective devices Threads for facepieces Part 1: Standard thread connection. EN 148-2, Respiratory protective devices Threads for facepieces Part 2: Centre thread connection. EN 148-3, Respiratory protective devices Threads for facepieces Part 3: T

30、hread connection M 45 x 3. EN 13274-3, Respiratory protective devices Methods of test Part 3: Determination of breathing resistance. EN 13274-5, Respiratory protective devices Methods of test Part 5: Climatic conditions. !EN 13274-7:2008, Respiratory protective devices Methods of test Part 7: Determ

31、ination of particle filter penetration.“ 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 132:1998 !, “ EN 134:1998 !and the following“ apply. !3.1 re-useable combined filter combined filter intended to be used for more than a single shift“ DI

32、N EN 14387:2008-05 EN 14387:2004+A1:2008 (E) 7 4 Description Air enters the gas or combined filter(s) and passes to the facepiece after removal of gases and vapours or gases, vapours and particles. 5 Classification 5.1 Types of filters 5.1.1 Gas filters Gas filters are produced in one of the followi

33、ng types: Types A, B, E, K, AX and SX. Type A For use against certain organic gases and vapours with a boiling point 65 C as specified by the manufacturer. Type B For use against certain inorganic gases and vapours as specified by the manufacturer. Type E For use against sulphur dioxide and other ac

34、idic gases and vapours as specified by the manufacturer. Type K For use against ammonia and organic ammonia derivatives as specified by the manufacturer. Type AX For use against certain organic gases and vapours with a boiling point 65 C as specified by the manufacturer. For single use only. Type SX

35、 For use against specific named gases and vapours as specified by the manufacturer. 5.1.2 Multi-type gas filters Filters which are a combination of two or more of the above types excluding type SX and which meet the requirements of each type separately. 5.1.3 Combined filters Gas or multi-type gas f

36、ilters incorporating a particle filter according to EN 143. 5.1.4 Special filters Special filters are: Type NOP3 For use against nitrogen oxides, e.g. NO, NO2, NOX. DIN EN 14387:2008-05 EN 14387:2004+A1:2008 (E) 8 Type HgP3 For use against mercury. These filters shall always incorporate a P3 filter

37、according to EN 143 and may be combined with each other and/or types specified under 5.1.1 except for type SX. 5.2 Classes of filters Gas filters of types A, B, E and K are classified in terms of capacity as follows: Class 1 low capacity filters; Class 2 medium capacity filters; Class 3 high capacit

38、y filters. The protection provided by a class 2 or class 3 filter includes that provided by the corresponding filter of lower class or classes. The classification of combined filter(s) includes that of particle filter(s) according to EN 143. Type AX and type SX gas filters and special filters are no

39、t classified. 6 Requirements 6.1 General In all tests, all test samples shall meet the requirements. 6.2 Ergonomics The requirements of this standard are intended to take account of the interaction between the wearer, the respiratory protective device, and where possible the working environment in w

40、hich the respiratory protective device is likely to be used. See annex ZA. 6.3 Design The filter shall be sufficiently robust to withstand the rough usage it is likely to receive in service. No part of the filter likely to be in contact with the wearer shall have sharp edges or burrs. The filter sha

41、ll be designed to ensure its full function in any orientation. Testing shall be done in accordance with 7.3. 6.4 Materials The filter shall be made of suitable material to withstand normal usage and exposures to those temperatures, humidity and corrosive environments that are likely to be encountere

42、d. Internally it shall withstand corrosion by the filtering media. Any material of the filter media or any gaseous products that may be released by the air flow through the filter shall not be known to constitute a hazard or nuisance for the wearer. DIN EN 14387:2008-05 EN 14387:2004+A1:2008 (E) 9 T

43、esting shall be done in accordance with 7.3. 6.5 Mass The maximum mass of filter(s) designated to be used directly connected to a half mask is 300 g. The maximum mass of filter(s) designated to be used directly connected to a full face mask is 500 g. Testing shall be done in accordance with 7.1. 6.6

44、 Connection The connection between filter(s) and facepiece or other device(s) with which it is intended to be used shall be robust and leaktight. The connection between filter and facepiece may be achieved by a permanent or special connector or a screw thread including a thread conforming to EN 148-

45、1. Threads conforming to EN 148-2 or EN 148-3 shall not be used. If the filter is designated to be used on a multiple filter facepiece or has any other thread, it shall not be possible to connect it to a thread conforming to EN 148-1, EN 148-2 or EN 148-3. The filter shall be readily replaceable wit

46、hout use of special tools and shall be designed or marked to prevent incorrect assembly. The particle filter of combined filters shall be on the influent side of the gas filter. Testing shall be done in accordance with 7.3. 6.7 Multiple filters Where respirators are designed to use more than one fil

47、ter (i.e. multiple filter device), through which the flow is proportioned, all requirements given in this European Standard are to be met by the complete set of filters (e.g. the total mass of a filter set designated to be used directly connected to a half mask shall not exceed 300 g). If, however,

48、it is possible that a single filter of a multiple filter device may be used alone, then the requirements of the full flow rate for the tests, as stated in this European standard, shall be met. In the information supplied by the manufacturer all necessary information on how to use multiple filters sh

49、all be given. Testing shall be done in accordance with 7.1 and 7.3. 6.8 Packaging Filters shall be offered for sale packaged in such a way that they are protected against mechanical damage or visible contamination before use. Where appropriate, filters shall be factory sealed to protect the filter media against environmental influences in such a way that the breaking of the factory sealing can be identified. Testing shall be done in accordance with 7.3. DIN EN 14387:2008-05 EN 14387:2004+A1:2008 (E) 10 6.9 Mecha