DIN EN 14306-2016 Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification German version EN 14.pdf

《DIN EN 14306-2016 Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification German version EN 14.pdf》由会员分享，可在线阅读，更多相关《DIN EN 14306-2016 Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification German version EN 14.pdf（43页珍藏版）》请在麦多课文档分享上搜索。

1、March 2016 English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.60!%N%Q“2430246www.din.deDI

2、N EN 14306Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specification;English version EN 14306:2015,English translation of DIN EN 14306:2016-03Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlag

3、en in der Industrie Werkmig hergestellte Produkte aus Calciumsilikat (CS) Spezifikation;Englische Fassung EN 14306:2015,Englische bersetzung von DIN EN 14306:2016-03Produits isolants thermiques pour lquipement du btiment et les installations industrielles Produits manufacturs en silicate de calcium

4、(CS) Spcification;Version anglaise EN 14306:2015,Traduction anglaise de DIN EN 14306:2016-03SupersedesDIN EN 14306:2013-04See start of applicationwww.beuth.deDocument comprises 43 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative

5、.03.16 DIN EN 14306:2016-03 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-03-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official

6、Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces,

7、DIN EN 14306:2013-04, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 14306:2015) has been prepared by T

8、echnical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-69 AA Dmmstoffe fr betr

9、iebstechnische Anlagen in Gebuden und in der Industrie (SpA zu CEN/TC 88/WG 10). Amendments This standard differs from DIN EN 14306:2013-04 as follows: a) an addition has been made to the foreword; b) an addition has been made to 3.2.2; c) a new Subclause 4.3.8 has been added; d) 5.3.2 has been amen

10、ded; e) Clause 7 has been amended; f) Clause 8 has been amended; g) Annex A has been amended; h) Annex B (normative) “Testing for reaction to fire” has been deleted; i) a new version of Annex ZA has been added. Previous editions DIN EN 14306: 2010-03, 2013-04 EUROPEAN STANDARD NORME EUROPENNE EUROPI

11、SCHE NORM EN 14306 December 2015 ICS 91.100.60 Supersedes EN 14306:2009+A1:2013English Version Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification Produits isolants thermiques pour lquipement du btiment et les

12、installations industrielles - Produits manufacturs en silicate de calcium (CS) - SpcificationWrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus Calciumsilikat (CS) - Spezifikation This European Standard was approved

13、by CEN on 24 October 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national sta

14、ndards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and

15、notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary

16、, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC

17、Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14306:2015 EEN 14306:2015 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normative references 6 3 Terms, definitions,

18、symbols, units and abbreviated terms . 8 3.1 Terms and definitions . 8 3.1.1 Terms and definitions as given in EN ISO 9229:2007 8 3.1.2 Additional terms and definitions 8 3.2 Symbols, units and abbreviated terms 9 3.2.1 Symbols and units used in this standard 9 3.2.2 Abbreviations used in this stand

19、ard . 10 4 Requirements 10 4.1 General . 10 4.2 For all applications 10 4.2.1 Thermal conductivity . 10 4.2.2 Dimensions and tolerances 11 4.2.3 Dimensional stability 11 4.2.4 Reaction to fire of the product as placed on the market 11 4.2.5 Durability characteristics . 12 4.3 For specific applicatio

20、ns 12 4.3.1 General . 12 4.3.2 Maximum service temperature . 12 4.3.3 Minimum service temperature . 13 4.3.4 Compressive stress or compressive strength 13 4.3.5 Trace quantities of water soluble ions and the pH-value 14 4.3.6 Water vapour diffusion resistance 14 4.3.7 Short-term water absorption by

21、partial immersion . 14 4.3.8 Release of dangerous substances . 14 4.3.9 Continuous glowing combustion 14 5 Test methods . 14 5.1 Sampling 14 5.2 Conditioning . 15 5.3 Testing 15 5.3.1 General . 15 5.3.2 Thermal conductivity . 17 5.3.3 Maximum service temperature . 17 5.3.4 Reaction to fire 17 6 Desi

22、gnation code 18 7 Assessment and Verification of the Constancy of Performance (AVCP) . 18 7.1 General . 18 7.2 Product Type Determination (PTD) 18 7.3 Factory Production Control (FPC) 18 8 Marking and labelling . 19 Annex A (normative) Factory production control . 20 DIN EN 14306:2016-03 EN 14306:20

23、15 (E) 3 Annex B (normative) Determination of minimum service temperature 23 B.1 Definitions . 23 B.2 Principle . 23 B.3 Apparatus 23 B.4 Test specimens 24 B.5 Procedure 24 B.6 Calculation and expression of results . 25 B.7 Accuracy of measurements . 26 B.8 Test report 26 Annex C (informative) Prepa

24、ration of the test specimens to measure thermal conductivity . 27 C.1 Preparation of the test specimens to measure thermal conductivity . 27 C.2 Ageing . 27 Annex D (informative) Additional properties . 28 D.1 General . 28 D.2 Coefficient of thermal expansion 28 D.3 Apparent and true porosity 28 D.4

25、 Air flow resistance 28 D.5 Creep in compression 28 D.6 Permeability to gases 28 D.7 Acoustic properties 28 D.8 Bending strength 28 D.9 Apparent density 28 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 30 ZA.1 Scope an

26、d relevant characteristics 30 ZA.2 Procedures for AVCP of factory made calcium silicate (CS) 32 ZA.3 CE Marking and labelling . 39 Bibliography . 41 DIN EN 14306:2016-03 EN 14306:2015 (E) 4 European foreword This document (EN 14306:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal in

27、sulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the l

28、atest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14306:2009+A1:2013. This document

29、 is identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The main technical changes that have been made in this new edition of EN 14306 are the following: a) an addition to the foreword; b) an addition

30、 in Clause 3.2.2; c) a new Clause 4.3.8; d) modification of Clause 5.3.2; e) modification of Clause 7; f) modification of Clause 8; g) modification of Annex A; h) deletion of Annex B (normative) Testing for reaction to fire; i) a new Annex ZA. This document has been prepared under a mandate given to

31、 CEN by the European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and

32、contracting entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the bui

33、lding equipment or the industrial installation projected or because of safety regulations. This European Standard contains six annexes: Annex A (normative), Factory production control; Annex B (normative), Determination of minimum service temperature; Annex C (informative), Preparation of the test s

34、pecimens to measure thermal conductivity; DIN EN 14306:2016-03 EN 14306:2015 (E) 5 Annex D (informative), Additional properties ; Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. This document includes a bibliography. Thi

35、s European Standard is one of a series of standards for insulation products used in building equipment and industrial installations, but this standard can be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed b

36、elow as a European package of standards, setting 21 months after availability as the date of withdrawal (dow) of national standards which conflict with the European standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of f

37、actory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and i

38、ndustrial installations Factory made flexible elastomeric foam (FEF) products Specification EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment a

39、nd industrial installations Factory made calcium silicate (CS) products Specification EN 14307, Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for building equip

40、ment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification EN 14313, Th

41、ermal insulation products for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 15501, Thermal

42、 insulation products for building equipment and industrial installations Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products Specification According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement

43、 this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slo

44、vakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 14306:2016-03 EN 14306:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made calcium silicate products which are used for the thermal insulation of building equipment and industrial ins

45、tallations with an operating temperature range of approximately - 170 C to + 1 100 C. Calcium silicate products can be used below - 50 C. Below the operating temperature of - 50 C, special tests, regarding the suitability of the product in the intended application are advised (e.g. liquefaction of o

46、xygen). Manufacturers advice should be heeded in all cases. The products are manufactured in the form of boards, pipe sections, segments and prefabricated ware. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelli

47、ng. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered. This European Standard does not specify the required level or class of a given property that should

48、 be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,6 W/(mK) at 10 C are not covered by this standard.

49、 This European Standard does not cover products intended to be used for the insulation of the building structure. This European Standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For