DIN EN 14305-2016 Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification German version EN 1430.pdf

《DIN EN 14305-2016 Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification German version EN 1430.pdf》由会员分享，可在线阅读，更多相关《DIN EN 14305-2016 Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification German version EN 1430.pdf（47页珍藏版）》请在麦多课文档分享上搜索。

1、March 2016 English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.60!%N(P“2430545www.din.deDI

2、N EN 14305Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification;English version EN 14305:2015,English translation of DIN EN 14305:2016-03Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen

3、 in der Industrie Werkmig hergestellte Produkte aus Schaumglas (CG) Spezifikation;Englische Fassung EN 14305:2015,Englische bersetzung von DIN EN 14305:2016-03Produits isolants thermiques pour lquipement du btiment et les installations industrielles Produits manufacturs en verre cellulaire (CG) Spci

4、fication;Version anglaise EN 14305:2015,Traduction anglaise de DIN EN 14305:2016-03SupersedesDIN EN 14305:2013-04See start of applicationwww.beuth.deDocument comprises 47 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.03.16 DI

5、N EN 14305:2016-03 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-03-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal o

6、f the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 14

7、305:2013-04, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 14305:2015) has been prepared by Technical

8、Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-69 AA Dmmstoffe fr betriebstechn

9、ische Anlagen in Gebuden und in der Industrie (SpA zu CEN/TC 88/WG 10). Amendments This standard differs from DIN EN 14305:2013-04 as follows: a) an addition has been made to the foreword; b) an addition has been made to 3.2.2; c) a new Subclause 4.3.14 has been added; d) 5.3.2 has been amended; e)

10、Clause 7 has been amended; f) Clause 8 has been amended; g) Annex A has been amended; h) a new version of Annex ZA has been added. Previous editions DIN EN 14305: 2010-03, 2013-04 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14305 December 2015 ICS 91.100.60 Supersedes EN 14305:2009+A1:2013E

11、nglish Version Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Produits manufacturs en verre cellulaire (CG) - Spci

12、fication Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus Schaumglas (CG) - Spezifikation This European Standard was approved by CEN on 24 October 2015. CEN members are bound to comply with the CEN/CENELEC Internal

13、 Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

14、 member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versio

15、ns. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Po

16、land, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation

17、 in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14305:2015 EEN 14305:2015 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions . 8 3.1 Terms and definitions . 8 3.1.1 Terms and definitions as given in EN ISO 9229:

18、2007 8 3.1.2 Additional terms and definitions 9 3.2 Symbols, units and abbreviated terms 9 3.2.1 Symbols and units used in this standard 9 3.2.2 Abbreviated terms used in this standard 11 4 Requirements 11 4.1 General . 11 4.2 For all applications 11 4.2.1 Thermal conductivity . 11 4.2.2 Dimensions

19、and tolerances 12 4.2.3 Dimensional stability 13 4.2.4 Reaction to fire classification of the product as placed on the market 13 4.2.5 Durability characteristics . 14 4.3 For specific applications 14 4.3.1 General . 14 4.3.2 Maximum service temperature . 14 4.3.3 Minimum service temperature . 15 4.3

20、.4 Compressive strength . 15 4.3.5 Bending strength 16 4.3.6 Point load 16 4.3.7 Tensile strength parallel to faces . 16 4.3.8 Tensile strength perpendicular to faces 17 4.3.9 Compressive creep. 17 4.3.10 Water absorption . 17 4.3.11 Water vapour diffusion resistance 17 4.3.12 Trace quantities of wa

21、ter soluble ions and the pH-value 18 4.3.13 Sound absorption . 18 4.3.14 Release of dangerous substances . 18 4.3.15 Continuous glowing combustion 18 5 Test methods . 18 5.1 Sampling 18 5.2 Conditioning . 18 5.3 Testing 19 5.3.1 General . 19 5.3.2 Thermal conductivity . 19 5.3.3 Reaction to fire 21

22、6 Designation code 22 7 Assessment and Verification of the Constancy of Performance (AVCP) . 22 7.1 General . 22 7.2 Product Type Determination (PTD) 23 DIN EN 14305:2016-03 EN 14305:2015 (E) 3 7.3 Factory Production Control (FPC) 23 8 Marking and labelling . 23 Annex A (normative) Factory productio

23、n control . 24 Annex B (normative) Determination of minimum service temperature 27 B.1 Definitions . 27 B.2 Principle . 27 B.3 Apparatus 27 B.4 Test specimens 28 B.5 Procedure 28 B.6 Calculation and expression of results . 29 B.7 Accuracy of measurements . 29 B.8 Test report 30 Annex C (informative)

24、 Additional properties 31 C.1 General . 31 C.2 Fire protection . 31 C.3 Compressive strength . 31 C.4 Shear strength 31 C.5 Dimensional stability under constant normal laboratory conditions 31 C.6 Coefficient of thermal expansion 32 C.7 Apparent density 32 Annex D (informative) Preparation of the fl

25、at test specimens to measure thermal conductivity 33 D.1 Introduction 33 D.2 Procedure to get flat test specimen faces: method of the three rulers . 33 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 34 ZA.1 Scope and re

26、levant characteristic 34 ZA.2 Procedures for AVCP of factory made cellular glass products . 35 ZA.3 CE Marking and labelling . 43 Bibliography . 45 DIN EN 14305:2016-03 EN 14305:2015 (E) 4 European foreword This document (EN 14305:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal ins

27、ulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the la

28、test by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14305:2009+A1:2013. This document

29、is identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The main technical changes that have been made in this new edition of EN 14305 are the following: a) an addition to the foreword; b) an addition

30、in 3.2.2; c) a new 4.3.14; d) modification of 5.3.2; e) modification of Clause 7; f) modification of Clause 8; g) modification of Annex A; h) a new Annex ZA. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports

31、essential requirements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to specify their requirements usi

32、ng European harmonized product standards, are allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or the industrial installation projected or because of safety regulati

33、ons. This European Standard contains four annexes: Annex A (normative), Factory production control; Annex B (informative), Determination of minimum service temperature; Annex C (informative), Additional properties; DIN EN 14305:2016-03 EN 14305:2015 (E) 5 Annex D (informative), Preparation of the fl

34、at test specimens to measure thermal conductivity; Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. This document includes a bibliography. This European Standard is one of a series of standards for insulation products use

35、d in building equipment and industrial installations, but this standard can be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards, setting 21 months after availability a

36、s the date of withdrawal (dow) of national standards which conflict with the European Standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of

37、CEN/TC 88: EN 14303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products S

38、pecification EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specifi

39、cation EN 14307, Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethane foam (PUR) an

40、d polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification EN 14313, Thermal insulation products for building equipment and industrial installations F

41、actory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 15501, Thermal insulation products for building equipment and industrial installations Factor

42、y made expanded perlite (EP) and exfoliated vermiculite (EV) products Specification According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Rep

43、ublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN

44、 EN 14305:2016-03 EN 14305:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made cellular glass products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately - 265 C to + 430

45、C. Below an operating temperature of - 50 C, special tests regarding the suitability of the product in the intended application are advised (e.g. liquefaction of oxygen). Manufacturers advice should be heeded in all cases. The products are manufactured in the form of faced or unfaced boards, pipe se

46、ctions, segments and prefabricated ware. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; th

47、e performance of systems incorporating these products is not covered. This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be

48、 found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,065 W/(mK) at 10 C are not covered by this standard. This European Standard does not cover products for the insulation of the building structure. 2 Normative references The following documen

49、ts, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications - Determination of length and width EN 823, Thermal insulating products for buildi