DIN EN 14279-2009 Laminated Veneer Lumber (LVL) - Definitions classification and specifications (includes Amendment A1 2009) English version of DIN EN 14279 2009-07《层压薄木板(LVL) 定义 分.pdf

《DIN EN 14279-2009 Laminated Veneer Lumber (LVL) - Definitions classification and specifications (includes Amendment A1 2009) English version of DIN EN 14279 2009-07《层压薄木板(LVL) 定义 分.pdf》由会员分享，可在线阅读，更多相关《DIN EN 14279-2009 Laminated Veneer Lumber (LVL) - Definitions classification and specifications (includes Amendment A1 2009) English version of DIN EN 14279 2009-07《层压薄木板(LVL) 定义 分.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、July 2009DEUTSCHE NORM English price group 12No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 79.060.20; 79.080!$XTc“15

2、34964www.din.deDDIN EN 14279Laminated Veneer Lumber (LVL) A1:2009)English version of DIN EN 14279:2009-07Furnierschichtholz (LVL) Englische Fassung DIN EN 14279:2009-07SupersedesDIN EN 14279:2005-03www.beuth.deDefinitions, classification and specifications (includes AmendmentDefinitionen, Klassifizi

3、erung und Spezifikationen (enthlt nderung A1:2009)Document comprises 26 pagesDIN EN 14279:2009-07 2 National foreword This standard has been prepared by Technical Committee CEN/TC 112 “Wood-based panels”, (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the No

4、rmenausschuss Holzwirtschaft und Mbel (Timber and Furniture Standards Committee), Technical Committee NA 042-02-15 AA Spiegel-ausschuss zu CEN/TC 112 und ISO/TC 89 Holzwerkstoffe. It should be noted that in Germany, the Chemikalienverbotsverordnung ChemVerbotsV (Chemicals Prohibition Ordinance) gove

5、rns the permissible formaldehyde emissions. Amendments This standard differs from DIN EN 14279:2005-03 as follows: a) Clause 8: Instead of the code letter “G” now the code letters “NS” are used for the non structural application. b) The normative references in the text have been updated. Previous ed

6、itions DIN EN 14279: 2005-03 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14279:2004+A1 March 2009 ICS 79.080; 79.060.20 Supersedes EN 14279:2004English Version Laminated Veneer Lumber (LVL) - Definitions, classification and specifications Lamibois (LVL) - Dfinitions, classification et spcif

7、ications Furnierschichtholz (LVL) - Definitionen, Klassifizierung und Spezifikationen This European Standard was approved by CEN on 14 October 2004 and includes Amendment 1 approved by CEN on 3 February 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate t

8、he conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists

9、 in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bod

10、ies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EU

11、ROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14279:2004+A1:2009: EEN 14

12、279:2004+A1:2009 (E) 2 Contents page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Classification 7 5 Requirements .7 5.1 General requirements 7 5.2 Formaldehyde 8 5.3 Additional requirements for LVL/1: LVL for use in dry conditions 9 5.3.1 Bonding qualit

13、y 9 5.3.2 Biological durability 9 5.4 Additional requirements for LVL/2: LVL for use in humid conditions .9 5.4.1 Bonding quality 9 5.4.2 Biological durability 9 5.5 Additional requirements for LVL/3: LVL for use in exterior conditions .9 5.5.1 Bonding quality 9 5.5.2 Biological durability 9 6 Suppl

14、ementary properties 9 7 Verification 10 7.1 General . 10 7.2 External control . 10 7.3 Factory production control 10 8 Marking, identification and documentation . 11 Annex A (normative) Evaluation of the bonding quality of laminated veneer lumber . 12 Annex B (informative) Supplementary properties 2

15、3 Bibliography . 24 DIN EN 14279:2009-07 EN 14279:2004+A1:2009 (E) 3 Foreword This document (EN 14279:2004+A1:2009) has been prepared by Technical Committee CEN/TC 112 “Wood-based panels”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standar

16、d, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. This document includes Amendment 1, approved by CEN on 2009-02-03. This document supersedes EN 14279:2004. The star

17、t and finish of text introduced or altered by amendment is indicated in the text by tags ! “. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Re

18、public, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 14279:2009-07 EN 14279:2004+A1:2009 (E) 4 Intr

19、oduction LVL is covered by two standards: EN 14374 and EN 14279 (this document), prepared under Mandates M/112 and M/113 respectively. In the field of application of Mandate M/112 “Structural timber products and ancillaries“, LVL is a material used for manufacturing structural products. In the field

20、 of application of Mandate M/113 “Wood-based panels“, LVL is a product. The fields of application are to some extent overlapping. In some cases, the standard to be used is specified in the design standards, in other cases it is up to the user to specify the standard to be used. For relationship with

21、 Council Directive 89/106/EEC, EN 14374:2004 has its own Annex ZA. EN 14279 applies to LVL products for general purposes as well as to LVL products for use in construction, for relationship with Council Directive 89/106/EEC, refer to Annex ZA of EN 13986:2004. This document has been prepared in conc

22、ert with CEN/TC 124. Consequently, some parts are common with EN 14374, e.g. some definitions and general specifications. DIN EN 14279:2009-07 EN 14279:2004+A1:2009 (E) 5 1 Scope This document gives definitions, a classification and specifies the requirements for Laminated Veneer Lumber (LVL) for ge

23、neral purposes or for use in construction in dry, humid or exterior conditions. NOTE This standard will be called up in EN 13986 for construction applications. Annex A “Evaluation of the bonding quality of laminated veneer lumber“ is normative Information on supplementary properties is given in Anne

24、x B. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 310, Wood-based pa

25、nels Determination of modulus of elasticity in bending and of bending strength EN 314-1, Plywood Bonding quality Part 1: Test methods EN 314-2, Plywood Bonding quality Part 2: Requirements EN 315, Plywood Tolerances for dimensions EN 322, Wood-based panels Determination of moisture content EN 323, W

26、ood-based panels Determination of density EN 324-1, Wood-based panels Determination of dimensions of boards Part 1: Determination of thickness, width and length EN 324-2, Wood-based panels Determination of dimensions of boards Part 2: Determination of squareness and edge straightness EN 326-1, Wood-

27、based panels Sampling, cutting and inspection Part 1: Sampling and cutting of test pieces and expression of test results EN 326-2, Wood based panels Sampling, cutting and inspection Part 2: Quality control in the factory EN 326-3, Wood based panels Sampling, cutting and inspection Part 3: Inspection

28、 of an isolated lot of panels EN 335-3, Durability of wood and wood-based products Definition of hazard classes of biological attack Part 3: Application to wood-based panels EN 408, Timber structures Structural timber and glued laminated timber Determination of some physical and mechanical propertie

29、s EN 635-2, Plywood Classification by surface appearance Part 2: Hardwood EN 635-3, Plywood Classification by surface appearance Part 3: Softwood EN 635-5, Plywood Classification by surface appearance Part 5: Methods for measuring and expressing characteristics and defects DIN EN 14279:2009-07 EN 14

30、279:2004+A1:2009 (E) 6 EN 717-1, Wood-based panels Determination of formaldehyde release Part 1: Formaldehyde emission by the chamber method EN 717-2, Wood-based panels Determination of formaldehyde release Part 2: Formaldehyde release by the gas analysis method EN 789, Timber structures Test method

31、s Determination of mechanical properties of wood based panels EN 1058, Wood-based panels Determination of characteristic values of mechanical properties and density EN 13986:2004 Wood-based panels for use in construction Characteristics, evaluation of conformity and marking EN 14374, Timber structur

32、es Structural laminated veneer lumber (LVL) Requirements 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 laminated veneer lumber LVL layered composite of wood veneers with fibres principally in the same direction NOTE This definition does not

33、 preclude the inclusion of cross banded veneers. 3.2 lay-up composition of LVL with regard to number of veneers and their direction 3.3 dry conditions conditions corresponding to service class 1 of !EN 1995-1-1“ which is characterised by a moisture content in the material corresponding to a temperat

34、ure of 20 C and a relative humidity of the surrounding air only exceeding 65 % for a few weeks per year EN 13986:2004 3.4 humid conditions conditions corresponding to service class 2 of !EN 1995-1-1“ which is characterised by a moisture content in the material corresponding to a temperature of 20C a

35、nd a relative humidity of the surrounding air only exceeding 85 % for a few weeks per year EN 13986:2004 3.5 exterior conditions conditions corresponding to service class 3 of !EN 1995-1-1“ which is characterised by climatic conditions leading to higher moisture contents than in service class 2 EN 1

36、3986:2004 DIN EN 14279:2009-07 EN 14279:2004+A1:2009 (E) 7 4 Classification Three types of LVL are classified: LVL/1 for use in dry conditions LVL/2 for use in humid conditions LVL/3 for use in exterior conditions 5 Requirements 5.1 General requirements LVL shall comply with the general requirements

37、 listed in Table 1 when dispatched from the production factory. The requirements in Table 1 shall be met by the mean or percentile value given, calculated in accordance with EN 326-1. The bending properties according to Table 1 are used for quality control purposes only and shall not be used in desi

38、gn calculations. For structural applications, the characteristic values of mechanical properties shall be determined according to EN 1058 from EN 789 test results or EN 408 or methods referred to EN 14374. NOTE If it is made known by the purchaser that the boards are intended for specific use in flo

39、oring, walls or roofing, the performance standard EN 12871 also should be considered. This might result a need for compliance with additional requirements. Table 1 General requirements for all LVL Types No Property Test method Requirement 1a Tolerances on dimensions Thickness (sanded) within and bet

40、ween LVLs Thickness (unsanded) within and between LVLs Length and width EN 324-1 EN 315 2aEdge straightness tolerance EN 324-2 1,5 mm/m 3aSquareness tolerance EN 324-2 2,0 mm/m 4 Moisture content EN 322 6 % to 12 % 5 Tolerance on the mean density within a LVL EN 323 10 % 6 Bending strength major axi

41、s minor axis EN 310 5thpercentile Value determined at the initial testing of the product with regard to actual lay-up, density, veneer thickness and veneer grades 7 Modulus of elasticity in bending major axis minor axis EN 310 8 Bonding quality EN 314-1 In connection with Annex A Shear strength and

42、wood fibre failure in accordance with EN 314-2 9 Veneer grade Hardwood Softwood EN 635-5 EN 635-2 appearance class EN 635-3 appearance class aCertain uses of LVL can require other tolerances: see separate performance standards. DIN EN 14279:2009-07 EN 14279:2004+A1:2009 (E) 8 5.2 Formaldehyde For us

43、e in construction, refer to EN 13986. For use in non constructional applications, the following applies: LVL shall be tested and classified into either class E 1 or E 2. NOTE 1 In certain countries only products of the formaldehyde class E1 may be placed on the market (see the database “Legislation

44、on substances in construction products” http:/europa.eu.int/comm/enterprise/construction/internal/dangsub/dangmain.htm, for further information). The test requirements for both initial type testing and factory production control/continuous surveillance are laid down in Table 2 for E1 products and Ta

45、ble 3 for E2 products. NOTE 2 Boards of class E1 can be used without causing an indoor air concentration greater than 0,1 10-6(ppm) HCHO in conditions according to EN 717-1. The test requirement does not apply to LVL which has not had formaldehyde containing materials added during production or in p

46、ost-production processing. These may be classified E1 without testing. NOTE 3 Example of such LVL (coated or uncoated) are those glued with resins emitting either no formaldehyde or negligible amounts of formaldehyde after production as e.g. isocyanate, or phenolic glue. NOTE 4 The limit values for

47、the class E1 are given in Table 2 and for class E2 are given in Table 3. Table 2 Definition of formaldehyde class E1 Initial type testingaTest method EN 717-1 Requirement Release 0,124 mg/m3air Factory production control Test method EN 717-2 Requirement Release 3,5 mg/m2h or 5 mg/m2h within 3 days a

48、fter production aFor established products, initial testing may also be done on the basis of existing data with EN 717-2 testing, either from factory production control or from external inspection. Table 3 Definition of formaldehyde class E2 Initial type testing either Test method EN 717-1 Requiremen

49、t Release 0,124 mg/m3air or Test method EN 717-2 Requirement Release 3,5 mg/m2h to 8 mg/m2h or 5 mg/m2h to 12 mg/m2 h within 3 days after production Factory production control Test method EN 717-2 Requirement Release 3,5 mg/m2h to 8 mg/m2h or 5 mg/m2h to 12 mg/m2h within 3 days after production DIN EN 14279:2009-07 EN 14279:2004+A1:2009 (E) 9 5.3 Additional requirements for LVL/1: LVL for use in dry conditions 5.3.1 Bonding quality The bondin