DIN EN 13286-1-2003 Unbound and hydraulically bound mixtures - Part 1 Test methods for laboratory reference density and water content introduction and general requirements and samp.pdf

《DIN EN 13286-1-2003 Unbound and hydraulically bound mixtures - Part 1 Test methods for laboratory reference density and water content introduction and general requirements and samp.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13286-1-2003 Unbound and hydraulically bound mixtures - Part 1 Test methods for laboratory reference density and water content introduction and general requirements and samp.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 93.080.20Ungebundene und hydraulisch gebundene Gemische Teil 1: Laborprfverfahren fr die Trockendichte undden Wassergehalt Einfhrung, allgemeine Anforderungen und ProbenahmeEuropean Standard EN 13286-1 : 2003 has the status of a DIN Standard.A comma is used as the decimal marker.National forewor

2、dThis standard has been prepared by CEN /TC 227 Road materials (Secretariat: Germany).The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Buildingand Civil Engineering Standards Committee), Technical Committee 10.10.00/FGSV 6.0.2 Hydraulisch ge-bundene und ungeb

3、undene Mischungen.This European Standard is part of a series of standards dealing with unbound and hydraulically boundmixtures within the scope of the EC Directive on the approximation of the laws, regulations and adminis-trative provisions of the Member States relating to construction products.It s

4、hould be noted that not all of the DIN Standards dealing with unbound and hydraulically bound mixturesneed yet be withdrawn. This is in keeping with resolution C 88/98 taken by CEN/BT, which states that wherepackages of EN Standards are concerned, it shall be permitted for the relevant national stan

5、dards to remainvalid for longer periods than usual, until the EN package has been published in its entirety.In the case at hand, all of the relevant EN Standards have not yet been published, and CEN/TC 227 hastherefore decided to extend the period of validity for relevant national standards until th

6、e end of 2003.Ref. No. DIN EN 13286-1 : 2003-07English price group 07 Sales No. 110711.03DEUTSCHE NORM July 2003EN 13286-1Continued overleaf.EN comprises 10 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag

7、GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Unbound and hydraulically bound mixturesPart 1: Test methods for laboratory reference density andwater content Introduction, general requirements and samplingEnglish version of DIN EN 13286-1English version

8、ICS 93.080.20Unbound and hydraulically bound mixturesPart 1: Test methods for laboratory reference density and watercontent Introduction, general requirements and sampling 2003. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN 13286-1

9、 : 2003 EUngebundene und hydraulisch gebun-dene Gemische Teil 1: Laborprfver-fahren fr die Trockendichte und denWassergehalt Einfhrung, allgemei-ne Anforderungen und ProbenahmeThis European Standard was approved by CEN on 2002-12-12.CEN members are bound to comply with the CEN/CENELEC Internal Regul

10、ationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European

11、Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standa

12、rds bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ire-land, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia,Spain, Sweden, Switzerland, and the United Kingdom.EN 13286-1March 2003Management Centre: rue de Stassart 36

13、, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungMlanges traits et mlanges non trai-ts aux liants hydrauliques Partie 1:Mthodes dessai pour la masse volu-mique de rfrence et la teneur en eauen laboratoire Introduction, exigen-ces gnrales et chantillonnagePage 2EN 13286-1 : 2003Page 3EN 13286-1 : 2003Page 4EN 13286-1 : 2003Page 5EN 13286-1 : 2003Page 6EN 13286-1 : 2003Page 7EN 13286-1 : 2003Page 8EN 13286-1 : 2003Page 9EN 13286-1 : 2003Page 10EN 13286-1 : 2003