DIN EN 13171-2015 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification German version EN 13171 2012+A1 2015《建筑物用隔热产品 工厂制木纤维(WF)产品 规格 德文.pdf

《DIN EN 13171-2015 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification German version EN 13171 2012+A1 2015《建筑物用隔热产品 工厂制木纤维(WF)产品 规格 德文.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13171-2015 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification German version EN 13171 2012+A1 2015《建筑物用隔热产品 工厂制木纤维(WF)产品 规格 德文.pdf（53页珍藏版）》请在麦多课文档分享上搜索。

1、April 2015 Translation by DIN-Sprachendienst.English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、91.100.60!%B3m“2311674www.din.deDDIN EN 13171Thermal insulation products for buildings Factory made wood fibre (WF) products Specification;English version EN 13171:2012+A1:2015,English translation of DIN EN 13171:2015-04Wrmedmmstoffe fr Gebude Werkmig hergestellte Produkte aus Holzfasern (WF) Spezif

3、ikation;Englische Fassung EN 13171:2012+A1:2015,Englische bersetzung von DIN EN 13171:2015-04Produits isolants thermiques pour le btiment Produits manufacturs en fibres de bois (WF) Spcification;Version anglaise EN 13171:2012+A1:2015,Traduction anglaise de DIN EN 13171:2015-04SupersedesDIN EN 13171:

4、2013-03See start of applicationwww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 53 pages 03.15 DIN EN 13171:2015-04 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2015-04-01. It

5、 should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of t

6、his standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 13171:2013-03, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official J

7、ournal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13171:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body involved in

8、 its preparation was the DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-60 AA Wrmedmm-stoffe (SpA zu CEN/TC 88 und WG 1 bis 9, WG 12 bis 21, ISO/TC 61/SC 10, ISO/TC 163 (teilweise), ISO/TC 163/SC 1 und SC 3). This standard includes

9、Amendment A1 approved by CEN on 2014-12-15. Amendment 1 modifies EN 13171:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The start and finish of text introduced or altered by amendment is in

10、dicated in the text by tags !and “. This document is part of a package of interrelated standards for the specification of factory made thermal insulation products. Amendments This standard differs from DIN EN 13171:2013-03 as follows: a) an addition to the Foreword has been introduced; b) Subclause

11、3.2 “Symbols, units and abbreviated terms” has been amended; c) Subclause 4.3.15 “Release of dangerous substances” has been added; d) Clause 7 “Assessment and Verification of the Constancy of Performance (AVCP)” has been revised; e) Clause 8 “Marking and labelling” has been modified; f) Annex B “Pro

12、duct type determination (PTD) and factory production control (FPC)” has been modified; g) Annex ZA “Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation” has been added. Previous editions DIN 68755: 1992-07 DIN 68755-1: 2000-06 DIN EN 13171: 2001-10,

13、 2009-02, 2013-03 DIN EN 13171/A1: 2004-08 DIN EN 13171 Corrigendum 1: 2006-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13171:2012+A1 February 2015 ICS 91.100.60 Supersedes EN 13171:2012English Version Thermal insulation products for buildings - Factory made wood fibre (WF) products - Sp

14、ecification Produits isolants thermiques pour le btiment - Produits manufacturs en fibres de bois (WF) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Holzfasern (WF) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 appr

15、oved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nation

16、al standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own languag

17、e and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, H

18、ungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-C

19、ENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13171:2012+A1:2015 EEN 13171:2012+A1:2015 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, d

20、efinitions, symbols, units and abbreviated terms .8 3.1 Terms and definitions .8 3.2 Symbols, units and abbreviated terms 8 4 Requirements 11 4.1 General . 11 4.2 For all applications . 11 4.3 For specific applications 13 5 Test methods . 19 5.1 Sampling 19 5.2 Conditioning 19 5.3 Testing . 19 6 Des

21、ignation code 22 7 Assessment and Verification of the Constancy of Performance (AVCP) . 23 7.1 General . 23 7.2 Product Type Determination (PTD) . 23 7.3 Factory Production Control (FPC) 23 8 Marking and labelling . 23 Annex A (normative) Determination of the declared values of thermal resistance an

22、d thermal conductivity . 25 A.1 General . 25 A.2 Input data . 25 A.3 Declared values. 25 A.3.1 General . 25 A.3.2 Case where thermal resistance and thermal conductivity are declared . 25 A.3.3 Case where only thermal resistance is declared . 26 Annex B (normative) !Product type determination“ (!PTD“

23、) and factory production control (FPC) . 28 Annex C (normative) WF multi-layered thermal insulation products . 32 C.1 General . 32 C.2 Requirements 32 C.2.1 For all applications . 32 C.2.2 For specific applications 33 C.3 Test methods . 33 C.4 Evaluation of conformity 33 Annex D (normative) Determin

24、ation of the thermal conductivity in relation to moisture content 34 Annex E (informative) Additional properties . 36 DINEN 13171:2015-04EN 13171:2012+A1:2015 (E)3 E.1 General . 36 E.2 Bending strength . 36 E.3 Shear strength . 36 Annex F (informative) Examples for the determination of the declared

25、values of thermal resistance and thermal conductivity for a product or a product group 37 F.1 Case where both thermal resistance and thermal conductivity are declared . 37 F.2 Case where only thermal resistance is declared . 38 Annex ZA (informative) !Clauses of this European Standard addressing the

26、 provisions of the EU Construction Products Regulation“ 40 ZA.1 Scope and relevant characteristics . 40 ZA.2 Procedures for AVCP of factory made wood fibre products 42 ZA.3 CE Marking and labelling 49 Bibliography 51 Tables Table 1 Level and classes for thickness tolerances 12 Table 2 Dimensional st

27、ability under specified temperature and humidity conditions . 13 Table 3 Levels for compressive stress or compressive strength. 14 Table 4 Levels for tensile strength perpendicular to faces . 15 Table 5 Levels for short term water absorption by partial immersion . 16 Table 6 Classes for thickness to

28、lerances . 17 Table 7 Levels for compressibility . 17 Table 8 Test methods, test specimens and conditions . 20 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % 26 Table B.1 Minimum number of tests for ITT and minimum product testing frequencies 28 Table B.

29、2 Minimum product testing frequencies for the reaction to fire characteristics 30 Table E.1 Test methods, test specimens, conditions and minimum testing frequencies . 36 Table F.1 test results . 37 Table F.2 R test results 38 Table ZA.1 Relevant clauses for factory made wood fibre and intended use .

30、 40 Table ZA.2 Systems of AVCP . 42 Table ZA.3.1 Assignment of AVCP tasks for factory made wood fibre products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 43 Table ZA.3.2 Assignment of AVCP tasks for factory made wood fibre products under system 3 (see Table ZA.2) . 44 Table

31、ZA.3.3 Assignment of AVCP tasks for factory made wood fibre products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) 45 Figures Figure D.1 Example of a graphic representation of “f” . 35 Figure ZA.1 Example CE marking information of products under AVCP system 3 50 DINEN 13

32、171:2015-04EN 13171:2012+A1:2015 (E) 4 Foreword This document (EN 13171:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, eith

33、er by publication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/

34、or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU C

35、onstruction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ This document supersedes !EN 13171:2012“. This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment is indicated in th

36、e text by tags !“. Compared with EN 13171:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layer products; c) changes of some editorial and tech

37、nical content and addition of information on some specific items such as for WF: determination of thermal conductivity in relation to moisture content, thickness, compressive stress or compressive strength, tensile strength perpendicular to faces; d) addition of links to EN 15715, Thermal insulation

38、 products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes of Annex ZA. !Amendment 1 modifies EN 13171:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulat

39、ion (CPR). This amendment introduces f) an addition to the foreword; g) an addition in 3.2; h) a new subclause 4.3.15; i) modification of Clause 7; j) modification of Clause 8; DIN EN 13171:2015-04 EN 13171:2012+A1:2015 (E) 5 k) modification of Annex B; l) a new Annex ZA.“ This European Standard is

40、one of a series of standards for insulation products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of European Standards, setting 21 months aft

41、er availability as the date of withdrawal (dow) of national standards which conflict with the European Standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come wit

42、hin the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for buildings

43、 Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification EN 1316

44、7, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite board (EPB) pr

45、oducts Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Specification The reduction in energy used and emissions produced during the i

46、nstalled life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austr

47、ia, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden

48、, Switzerland, Turkey and the United Kingdom. DIN EN 13171:2015-04 EN 13171:2012+A1:2015 (E)6 1 Scope This European Standard specifies the requirements for factory made wood fibre (WF) products, with or without facings or coatings, which are used for the thermal insulation of buildings1). The products are manufactured in the form of rolls, batts, felts, boards or slabs. Products covered by this standard are also used in prefabricated thermal insulat