DIN EN 13170-2015 en 1276 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification German version EN 13170 2012+A1 2015《建筑物隔热产品 工厂制弹.pdf

《DIN EN 13170-2015 en 1276 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification German version EN 13170 2012+A1 2015《建筑物隔热产品 工厂制弹.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13170-2015 en 1276 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification German version EN 13170 2012+A1 2015《建筑物隔热产品 工厂制弹.pdf（51页珍藏版）》请在麦多课文档分享上搜索。

1、April 2015 Translation by DIN-Sprachendienst.English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、91.100.60!%B3r“2311679www.din.deDDIN EN 13170Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification;English version EN 13170:2012+A1:2015,English translation of DIN EN 13170:2015-04Wrmedmmstoffe fr Gebude Werkmig hergestellte Produkte aus expandiertem Ko

3、rk (ICB) Spezifikation;Englische Fassung EN 13170:2012+A1:2015,Englische bersetzung von DIN EN 13170:2015-04Produits isolants thermiques pour le btiment Produits manufacturs en lige expans (ICB) Spcification;Version anglaise EN 13170:2012+A1:2015,Traduction anglaise de DIN EN 13170:2015-04Supersedes

4、DIN EN 13170:2013-03See start of applicationwww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 51 pages 03.15 DIN EN 13170:2015-04 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2

5、015-04-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further informatio

6、n, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 13170:2013-03, may be used in parallel with this standard during a specified transition period where such has been laid down in t

7、he Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13170:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German bod

8、y involved in its preparation was the DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-60 AA Wrmedmm-stoffe (SpA zu CEN/TC 88 und WG 1 bis 9, WG 12 bis 21, ISO/TC 61/SC 10, ISO/TC 163 (teilweise), ISO/TC 163/SC 1 und SC 3). This stand

9、ard includes Amendment A1 approved by CEN on 2014-12-15. Amendment 1 modifies EN 13170:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The start and finish of text introduced or altered by am

10、endment is indicated in the text by tags !and “. This document is part of a package of interrelated standards for the specification of factory made thermal insulation products. Amendments This standard differs from DIN EN 13170:2013-03 as follows: a) an addition to the Foreword has been introduced;

11、b) Subclause 3.2 “Symbols, units and abbreviated terms” has been amended; c) Subclause 4.3.13 “Release of dangerous substances” has been added; d) Clause 7 “Assessment and Verification of the Constancy of Performance (AVCP)” has been revised; e) Clause 8 “Marking and labelling” has been modified; f)

12、 Annex B “Product type determination (PTD) and factory production control (FPC)” has been modified; g) Annex ZA “Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation” has been added. Previous editions DIN 18161-1: 1976-12 DIN EN 13170: 2001-10, 2009-

13、02, 2013-03 DIN EN 13170 Corrigendum 1: 2006-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13170:2012+A1 February 2015 ICS 91.100.60 Supersedes EN 13170:2012English Version Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification Produits iso

14、lants thermiques pour le btiment - Produits manufacturs en lige expans (ICB) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus expandiertem Kork (ICB) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15

15、December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may b

16、e obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to

17、the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, I

18、reland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management

19、Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13170:2012+A1:2015 EEN 13170:2012+A1:2015 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbol

20、s, units and abbreviated terms .8 4 Requirements 11 5 Test methods . 18 6 Designation code 21 7 Assessment and Verification of the Constancy of Performance (AVCP) . 22 8 Marking and labelling . 22 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity

21、 . 24 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 27 Annex C (normative) Multi layered insulation products (insulation cork board) 31 Annex D (normative) Determination of the thermal conductivity in relation to moisture content 33 Annex E (informat

22、ive) Examples for the determination of the declared values of thermal resistance and thermal conductivity for a product or a product group 35 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 38 Bibliography . 49 Tables Ta

23、ble 1 Classes for length tolerances 12 Table 2 Classes for width tolerances 12 Table 3 Classes for thickness tolerances . 13 Table 4 Levels for bending strength . 14 Table 5 Dimensional stability under specified temperature and humidity conditions 14 Table 6 Levels for compressive stress at 10 % def

24、ormation 15 Table 7 Levels for tensile strength perpendicular to faces 15 Table 8 Levels for compressibility 17 Table 9 Test methods, test specimens and conditions. 20 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 26 Table B.1 Minimum number of tests

25、for !PTD“ and minimum product testing frequencies . 27 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 29 Table E.1 test results . 35 Table E.2 R test results . 36 Table ZA.1 Relevant clauses for factory made expanded cork and intended use . 38 DIN EN 13170:201

26、5-04 EN 13170:2012+A1:2015 (E) 3 Table ZA.2 Systems of AVCP . 40 Table ZA.3.1 Assignment of AVCP tasks for factory made expanded cork products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 40 Table ZA.3.2 Assignment of AVCP tasks for factory made expanded cork products under sy

27、stem 3 (see Table ZA.2). 42 Table ZA.3.3 Assignment of AVCP tasks for factory made expanded cork products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) 43 Figures Figure D.1 Example of a graphic representation of “a” . 34 Figure ZA.1 Example CE marking information of pro

28、ducts under AVCP system 1 and system 3“ . 48 DIN EN 13170:2015-04 EN 13170:2012+A1:2015 (E) 4 Foreword This document (EN 13170:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard

29、 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this

30、 document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 13170:2012“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade

31、 Association, and supports essential requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of tex

32、t introduced or altered by amendment is indicated in the text by tags !“. Compared with EN 13170:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on mult

33、i-layered products; c) changes on some editorial and technical content and addition of information on some specific items such as for ICB; d) addition of links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes

34、 to Annex ZA. !Amendment 1 modifies EN 13170:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) an addition in 3.2; h) a new subclaus

35、e 4.3.13; i) modification of Clause 7; j) modification of Clause 8; k) modification of Annex B; DIN EN 13170:2015-04 EN 13170:2012+A1:2015 (E) 5 l) a new Annex ZA.“ This standard is one of a series of standards for insulation products used in buildings, but may be used in other areas where appropria

36、te. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a “package” of documents. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of whic

37、h come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for

38、 buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specificati

39、on EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite boar

40、d (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Specification The reductions in energy used and emissions produced d

41、uring the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Stan

42、dard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Sp

43、ain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13170:2015-04 EN 13170:2012+A1:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made products of expanded cork, which are used for the thermal insulation of buildings. The products are made with granulate

44、d cork agglomerated without additional binders and are delivered as boards with or without facings or coatings. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. Th

45、is standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The le

46、vels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,25 m2K/W, or a declared thermal conductivity greater than 0,060 W/(mK), at 10 C, are not covered by this European Standard. 2 Normative referenc

47、es The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 8

48、22, Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826, Thermal insulating products for building applications Determination o