DIN EN 13114-2010 Tannery machines - Rotating process vessels - Safety requirements German version EN 13114 2002+A1 2009《制革机 旋转加工器具 安全要求》.pdf

《DIN EN 13114-2010 Tannery machines - Rotating process vessels - Safety requirements German version EN 13114 2002+A1 2009《制革机 旋转加工器具 安全要求》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13114-2010 Tannery machines - Rotating process vessels - Safety requirements German version EN 13114 2002+A1 2009《制革机 旋转加工器具 安全要求》.pdf（37页珍藏版）》请在麦多课文档分享上搜索。

1、March 2010 Translation by DIN-Sprachendienst.English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、59.140.40!$ag“1620468www.din.deDDIN EN 13114Tannery machines Rotating process vessels Safety requirements (includes Amendment A1:2009)English translation of DIN EN 13114:2010-03Gerberei-Maschinen Rotierende Bearbeitungsgefe Sicherheitsanforderungen (enthlt nderung A1:2009)Englische bersetzung von DI

3、N EN 13114:2010-03Machines de tannerie Tonneaux tournants Prescriptions de scurit (Amendement A1:2009 inclus)Traduction anglaise de DIN EN 13114:2010-03SupersedesDIN EN 13114:2003-01See start of validitywww.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be consi

4、dered authoritative.03.10 37DIN EN 13114:2010-03 A comma is used as the decimal marker. Start of validity This standard takes effect on 1 March 2010. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 200 “Tannery machinery Saf

5、ety” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Section Lederherstellungs- und Pelzmaschinen. Amendment of the European Machinery Directive has made it necessary to review the p

6、reviously valid standard, EN 13114:2002, in terms of the essential requirements of the new European Machinery Directive, 2006/42/EC. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC (valid until 28 December 2

7、009), and the “revised Machinery Directive”, Directive 2006/42/EC, which takes effect on 29 December 2009, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of

8、the directives. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards

9、 referred to in clause 2 and in the bibliography of the EN have been published as the corresponding DIN EN, DIN EN ISO or DIN CLC/TS Standards with the same number. Amendments This standard differs from DIN EN 13114:2003-01 as follows: a) Normative references have been updated. b) The information fo

10、r use given in 7.1 and 7.2 has been amended. c) Table 2 “Methods of verification” has been updated. d) The informative Annex ZA “Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC” has been revised. e) An informative Annex ZB “Relationship between thi

11、s European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been included. Previous editions DIN EN 13114: 2003-01 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13114:2002+A1 November 2009 ICS 59.140.40 Supersedes EN 13114:2002English Version Tannery machines - Rotati

12、ng process vessels - Safety requirements Machines de tannerie - Tonneaux tournants - Prescriptions de scurit Gerberei-Maschinen - Rotierende Bearbeitungsgefe - Sicherheitsanforderungen This European Standard was approved by CEN on 27 December 2001 and includes Amendment 1 approved by CEN on 10 Octob

13、er 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obta

14、ined on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Manage

15、ment Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norw

16、ay, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form

17、and by any means reserved worldwide for CEN national Members. Ref. No. EN 13114:2002+A1:2009: EEN 13114:2002+A1:2009 (E) 2 Contents age Foreword 4Introduction . 51 Scope 52 Normative references 53 Terms and definitions . 74 !List of significant hazards“ 84.1 Mechanical hazards . 94.1.1 General 94.1.

18、2 Wet processing vessels 94.1.3 Dry milling drums 94.2 High pressure fluid ejection . 104.3 Electrical hazard 104.4 Slip trip and fall hazard . 104.5 Noise . 104.6 Fume and vapour emission 114.7 Fire prevention . 114.8 Neglecting ergonomics principles . 114.9 Disassembly . 115 Safety requirements an

19、d/or measures 115.1 General 115.2 Common requirements concerning rotating process vessels . 125.2.1 Mechanical equipment 125.2.2 High pressure fluid and burst component part ejection 125.2.3 Electrical equipment (for all machines) . 135.2.4 Slip, trip and fall hazard 135.2.5 Noise . 135.2.6 Dust, fu

20、me and vapour emission . 135.2.7 Control system . 145.2.8 Emergency stop equipment 145.2.9 Fire prevention . 155.2.10 Rotating vessels equipped with manual door 155.2.11 Disassembly . 155.3 Requirements concerning hazards in the working zone . 165.3.1 Wet processes vessels . 165.3.2 Dry milling drum

21、s 175.4 Requirements for hazards in accessible zone 185.4.1 Wet processes vessels . 185.4.2 Dry milling drum 186 Verification of the safety requirements and/or measures . 187 Information for use 237.1 !General 237.2 Signal and warning devices“ 237.3 Instruction Handbook 237.3.1 Machine . 237.3.2 Ins

22、tallation of the machine . 247.3.3 Transportation and Storage of the machine and machine parts 247.3.4 Use of the machine 247.3.5 Maintenance . 257.4 Marking . 25Annex A (informative) Noise reduction measures 30A.1 Reduction at source 30A.2 Protective measure 30Annex B (normative) Flow detector 31DI

23、N EN 13114:2010-03 PEN 13114:2002+A1:2009 (E) 3 Annex C (normative) Machinery description . 32Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC“ . 33Annex ZB (informative) !Relationship between this European Standard and the E

24、ssential Requirements of EU Directive 2006/42/EC“ . 34Bibliography 35DIN EN 13114:2010-03 EN 13114:2002+A1:2009 (E) 4 Foreword This document (EN 13114:2002+A1:2009) has been prepared by Technical Committee CEN/TC 200 “Tannery machinery - Safety“, the secretariat of which is held by UNI. This Europea

25、n Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of th

26、is document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-10-10. This document supersedes EN 13114:2002. The start and finish of text introduced or alter

27、ed by amendment is indicated in the text by tags!“XThis document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes

28、ZA and ZB, which are integral parts of this document.“ Annex A is informative, the annexes B and C are normative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgar

29、ia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 13114:2010-03 EN 13114:200

30、2+A1:2009 (E) 5 Introduction !This document is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this document. When provisions of this type C standard are differen

31、t from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard.“ 1 Scope 1.1 This European Standard specifies

32、 safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of a machine. 1.2 This standard covers the following machines (see annex C and Figures 1 and 2 for typical configurations): a) horizontal rotating vessels; b) inclined rotating vessels. 1.3 This s

33、tandard does not apply to machines using substances containing solvent, that would generate fume and/or vapour detrimental to health, or that may lead to fire or explosive atmosphere. 1.4 This standard takes account of intended use, foreseeable misuse, component and systems failure. The machines are

34、 for fixed installation. 1.5 !This document is not applicable to the rotating vessels which are manufactured before the date of its publication as EN.“ 1.6 This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective s

35、ystems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be n

36、ecessary to satisfy Directive 94/9/EC. 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendme

37、nts) applies.“ !deleted text“ EN 294:1992, Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs !deleted text“ EN 626-1:1994, Safety of machinery Reduction of risk to health from hazardous substances emitted by machinery Part 1: Principles and specifications

38、for machinery manufacturers DIN EN 13114:2010-03 EN 13114:2002+A1:2009 (E) 6 EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards !deleted text“ EN 982:1996, Safety of machinery Safety requirements for fluid power systems and compon

39、ents Hydraulics EN 983:1996, Safety of machinery Safety requirements for fluid power systems and components Pneumatics EN 999:1998, Safety of machinery The positioning of protective equipment in respect of approach speeds of parts of the human body !EN 1005-3:2002, Safety of machinery Human physical

40、 performance Part 3: Recommended force limits for machinery operation“ !EN 1037:1995“, Safety of machinery Prevention of unexpected start-up !deleted text“ EN 1088:1995, Safety of machinery Interlocking devices associated with guards Principles for design and selection !EN 1760-2:2001, Safety of mac

41、hinery Pressure sensitive protective devices Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars“ !EN ISO 3743-1:1995“, Acoustics Determination of sound power levels of noise sources Engineering methods for small, movable sources in reverbera

42、nt fields Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994) !EN ISO 3743-2:1996“, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation te

43、st rooms (ISO 3743-2:1994) !EN ISO 3744:1995“, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) !EN ISO 3746:1995“, Acoustics Determination of sound power levels of noise source

44、s using sound pressure Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995) !EN ISO 3747:2000“, Acoustics Determination of sound power levels of noise sources using sound pressure Comparison method for use in situ (ISO 3747:2000) !EN ISO 4871:1996“, Acoustics

45、 Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) !EN ISO 9614-1:1995, Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurements at discrete points (ISO 9614-1:1993) EN ISO 9614-2:1996, Acoustics Determin

46、ation of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning (ISO 9614-2:1996) EN ISO 9614-3:2002, Acoustics Determination of sound power levels of noise sources using sound intensity Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)“ !EN IS

47、O 11201:1995“, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) !EN ISO 11202:1995“, Acoustics Noise emitted by

48、machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Survey method in situ (ISO 11202:1995) DIN EN 13114:2010-03 EN 13114:2002+A1:2009 (E) 7 !EN ISO 11203:1995“, Acoustics Noise emitted by machinery and equipment Determination of em

49、ission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) !EN ISO 11204:1995“, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Method requiring environmental corrections (ISO 11204:19