DIN EN 13112-2011 Tannery machines - Splitting and bandknife shearing machines - Safety requirements German version EN 13112 2002+A1 2009《制革机 片皮机和带式刀剪切机 安全性要求 德文版本EN 13112-2002+A1-.pdf

《DIN EN 13112-2011 Tannery machines - Splitting and bandknife shearing machines - Safety requirements German version EN 13112 2002+A1 2009《制革机 片皮机和带式刀剪切机 安全性要求 德文版本EN 13112-2002+A1-.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13112-2011 Tannery machines - Splitting and bandknife shearing machines - Safety requirements German version EN 13112 2002+A1 2009《制革机 片皮机和带式刀剪切机 安全性要求 德文版本EN 13112-2002+A1-.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、March 2011 Translation by DIN-Sprachendienst.English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、59.140.40!$nk“1752572www.din.deDDIN EN 13112Tannery machines Splitting and bandknife shearing machines Safety requirements (includes Amendment A1:2009)English translation of DIN EN 13112:2011-03Gerberei-Maschinen Spalt- und Bandmesserschermaschinen Sicherheitsanforderungen (enthlt nderung A1:2009)En

3、glische bersetzung von DIN EN 13112:2011-03Machines de tannerie Machines refendre et tondeuses ruban Prescriptions de scurit (Amendement A1:2009 inclus)Traduction anglaise de DIN EN 13112:2011-03SupersedesDIN EN 13112:2003-01See start of applicationwww.beuth.deDocument comprises pagesIn case of doub

4、t, the German-language original shall be considered authoritative.4003.11 DIN EN 13112:2011-03 A comma is used as the decimal marker. Start of application The start of application of this standard is 1 March 2011. National foreword This standard includes safety requirements. This standard has been p

5、repared by Technical Committee CEN/TC 200 “Tannery machinery Safety” (Secretariat: UNI, Italy). The national committe representing German interests in the standard is the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-26-69-02 AK Lederherstellungs

6、- und Pelzmaschinen. Since the EN was developed without the participation of German experts, however, its adoption as a national standard is a formality only. This standard contains specifications meeting the essential requirements set out in Annex I of the new “Machinery Directive”, Directive 2006/

7、42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directive. Once this standard is cited in the Official Journal of the European Union, it is deem

8、ed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and the Bibliography of this document have been published as the correspondi

9、ng DIN EN or DIN EN ISO Standards with the same number. Amendments This standard differs from DIN EN 13112:2003-01 as follows: a) the foreword has been modified; b) the introduction has been modified; c) Clause 1 “Scope” has been modified and updated; d) Clause 2 “Normative references” has been upda

10、ted; e) Clause 3 “Terms and definitions” has been modified; f) Clause 4 “List of significant hazards” has been modified; g) Clause 5 “Safety requirements and/or protective measures” has been modified; h) Clause 6 “Verification of safety requirements and/or protective measures” has been modified; i)

11、Clause 7 “Information for use” has been modified; j) Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC” has been modified; k) Annex ZB (informative) “Relationship between this European Standard and the Essential Requirements o

12、f EU Directive 2006/42/EC” has been included. Previous editions DIN EN 13112: 2003-01 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13112:2002+A1 November 2009 ICS 59.140.40 Supersedes EN 13112:2002English Version Tannery machines Splitting and bandknife shearing machines Safety requirement

13、s Machines de tannerie Machines refendre et tondeuses ruban Prescriptions de scurit Gerberei-Maschinen Spalt- und Bandmesserschermaschinen Sicherheitsanforderungen This European Standard was approved by CEN on 27 December 2001 and includes Amendment 1 approved by CEN on 10 October 2009. CEN members

14、are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to

15、 the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the sa

16、me status as theofficial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Ro

17、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserve

18、d worldwide for CEN national Members. Ref. No. EN 13112:2002+A1:2009: EEN 13112:2002+A1:2009 (E) 2 Contents page Foreword 4Introduction . 51 Scope 52 Normative references 53 Terms and definitions - Terminology. 84 !List of significant hazards“ 104.1 Mechanical hazards . 114.1.1 Splitting machine . 1

19、14.1.2 Bandknife shearing machine 124.2 Electrical hazard 134.3 Slip trip and fall hazard . 134.4 High pressure fluid ejection . 134.5 Dust and fire . 134.6 Noise . 134.7 Bandknife changing. 135 Safety requirements and/or measures 145.1 General 145.2 Common requirements concerning splitting machines

20、 145.2.1 Mechanical equipment 145.2.2 Electrical equipment 155.2.3 Slip, trip and fall hazard 155.2.4 High pressure fluid ejection . 155.2.5 Dust and fire prevention . 165.2.6 Noise . 165.2.7 Control system . 165.2.8 Emergency stop equipment 175.2.9 Bandknife changing. 175.3 Requirements concerning

21、hazards in the working zone . 185.3.1 Splitting machine . 185.3.2 Bandknife shearing machine 195.4 Requirements concerning hazards in the accessible zone 205.4.1 Splitting and bandknife shearing machine . 205.4.2 Bandknife shearing machine 206 Verification of the safety requirements and/or measures

22、. 207 Information for use 267.1 !General 267.2 Signal and warning devices“ 267.3 Instruction Handbook 267.3.1 Machine . 267.3.2 Installation of the machine . 277.3.3 Transportation and Storage of the machine and machine parts 277.3.4 Use of the machine 277.3.5 Maintenance . 287.4 Marking . 28Annex A

23、 (normative) Dust and fire prevention . 35A.1 Splitting machine . 35DIN EN 13112:2011-03 EN 13112:2002+A1:2009 (E) 3 A.2 Bandknife shearing machine . 35Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC“ 36Annex ZB (informative

24、) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ 37Bibliography 38DIN EN 13112:2011-03 EN 13112:2002+A1:2009 (E) 4 Foreword This document (EN 13112:2002+A1:2009) has been prepared by Technical Committee CEN/TC 200, “Tannery machinery - Safety“

25、, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010. Attention is d

26、rawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-10-10. This document supersedes EN 13112

27、:2002. The start and finish of text introduced or altered by amendment is indicated in the text by tags!“XThis document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For rela

28、tionship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ Annex A is normative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austri

29、a, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 13112:20

30、11-03 EN 13112:2002+A1:2009 (E) 5 Introduction !This document is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this document. When provisions of this type C sta

31、ndard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard.“ 1 Scope This European Stan

32、dard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of splitting machines (see figures 1, 2) for limed hides and skins, wet blue and dry materials, bandknife shearing machines (see figures 3, 4, 5, 6) used in the splitting and shearin

33、g of leather and synthetic materials. This standard takes account of intended use, foreseeable misuse, component and systems failure. The machines are for fixed installation. !This document is not applicable to the splitting and bandknife shearing machines which are manufactured before the date of i

34、ts publication as EN.“ All the significant hazards listed in clause 4 are safeguarded by the requirements included in clause 5 except dust and fire. For these hazards general guidelines are proposed in normative annex A. Designers and manufacturers shall verify directly that the methods adopted to r

35、educe these hazards have been successful. This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment

36、 covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC. 2 Normative references !The following referenced documents are indispensabl

37、e for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.“ !deleted text“ DIN EN 13112:2011-03 EN 13112:2002+A1:2009 (E) 6 EN 294:1992, Safety of machinery Sa

38、fety distances to prevent danger zones being reached by the upper limbs !deleted text“ EN 626-1:1994, Safety of machinery Reduction of risk to health from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers EN 842, Safety of machinery Visual da

39、nger signals General requirements, design and testing EN 953:1997,Safety of machinery Guards General requirements for the design and construction of fixed and moveable guards !deleted text“ EN 982:1996, Safety of machinery Safety requirements for fluid power systems and components Hydraulics EN 983:

40、1996, Safety of machinery Safety requirements for fluid power systems and components Pneumatics EN 999:1998, Safety of machinery The positioning of protective equipment in respect of approach speeds of parts of the human body EN 1037, Safety of machinery Prevention of unexpected start-up !deleted te

41、xt“ EN 1088:1995, Safety of machinery Interlocking devices associated with guards Principles for design and selection !EN 1760-2:2001, Safety of machinery Pressure sensitive protective devices Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive ba

42、rs“ !EN ISO 3743-1:1995“, Acoustics Determination of sound power levels of noise sources Engineering methods for small, movable sources in reverberant fields Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994) !EN ISO 3743-2:1996“, Acoustics Determination of sound power levels of

43、noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) !EN ISO 3744:1995“, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering method in

44、 an essentially free field over a reflecting plane (ISO 3744:1994) !EN ISO 3746:1995“, Acoustics Determination of sound power levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995) !EN ISO 3747:2000“, Acoustics Deter

45、mination of sound power levels of noise sources using sound pressure Comparison method for use in situ (ISO 3747:2000) !EN ISO 4871:1996“, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) !EN ISO 7731:2008, Ergonomics Danger signals for publi

46、c and work areas Auditory danger signals (ISO 7731:2003)“ DIN EN 13112:2011-03 EN 13112:2002+A1:2009 (E) 7 !EN ISO 9614-1:1995, Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurements at discrete points (ISO 9614-1:1993) EN ISO 9614-2:1996, Acoustics

47、 Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning (ISO 9614-2:1996) EN ISO 9614-3:2002, Acoustics Determination of sound power levels of noise sources using sound intensity Part 3: Precision method for measurement by scanning (ISO 9614-3:2002

48、)“ !EN ISO 11201:1995“, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) !EN ISO 11202:1995“, Acoustics Noise emitted by machinery and equipment Me