DIN EN 13108-2-2016 Bituminous mixtures - Material specifications - Part 2 Asphalt Concrete for Very Thin Layers (BBTM) German version EN 13108-2 2016《沥青混合物 材料规范 第2部分 极薄层沥青混凝土(BBTM.pdf

《DIN EN 13108-2-2016 Bituminous mixtures - Material specifications - Part 2 Asphalt Concrete for Very Thin Layers (BBTM) German version EN 13108-2 2016《沥青混合物 材料规范 第2部分 极薄层沥青混凝土(BBTM.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13108-2-2016 Bituminous mixtures - Material specifications - Part 2 Asphalt Concrete for Very Thin Layers (BBTM) German version EN 13108-2 2016《沥青混合物 材料规范 第2部分 极薄层沥青混凝土(BBTM.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、December 2016 English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 93.080.20!%hC“2596932www.din.de

2、DIN EN 13108-2Bituminous mixtures Material specifications Part 2: Asphalt Concrete for Very Thin Layers (BBTM);English version EN 131082:2016,English translation of DIN EN 13108-2:2016-12Asphaltmischgut Mischgutanforderungen Teil 2: Asphaltbeton fr sehr dnne Schichten (BBTM);Englische Fassung EN 131

3、082:2016,Englische bersetzung von DIN EN 13108-2:2016-12Mlanges bitumineux Spcifications pour le matriau Partie 2: Btons bitumineux trs minces (BBTM);Version anglaise EN 131082:2016,Traduction anglaise de DIN EN 13108-2:2016-12SupersedesDIN EN 131082:200608 andDIN EN 131082Corrigendum1:200806See sta

4、rt of applicationwww.beuth.deDocument comprises 34 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.12.16 DIN EN 13108-2:2016-12 2 A comma is used as the decimal marker. Start of application The start of application of this stan

5、dard is 2016-12-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further i

6、nformation, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standards which this document replaces, DIN EN 13108-2:2006-08 and DIN EN 13108-2 Corrigendum 1:2008-06, may be used in parallel with this standard during a specified

7、 transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13108-2:2016) has been prepared by Technical Committee CEN/TC 227 “Road materials” (Secretariat: DIN, Germany). The r

8、esponsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-10-10 AA Asphalt (SpA zu CEN/TC 227/WG 1) Gemeinschaftsausschuss mit FGSV. Amendments This standard differs from DIN EN 13108-2:2006-

9、08 and DIN EN 13108-2 Corrigendum 1:2008-06 as follows: a) general, empirical and fundamental approaches are no longer used separately, and the properties have been merged into one list with different properties; b) new properties have been introduced (low temperature properties, friction after poli

10、shing); c) additional optional sieves for the characterization of the grading have been introduced; d) for several properties additional categories have been introduced; e) specific conditions may now be defined in documents related to the application of the product; f) reference to the EU Construct

11、ion Products Regulation and a new Annex ZA according to CPR rules have been included. Previous editions DIN EN 13108-2: 2006-08 DIN EN 13108-2 Corrigendum 1: 2008-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13108-2 June 2016 ICS 93.080.20 Supersedes EN 13108-2:2006English Version Bitumin

12、ous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM) Mlanges bitumineux - Spcifications pour le matriau -Partie 2: Btons bitumineux trs minces (BBTM) Asphaltmischgut - Mischgutanforderungen - Teil 2: Asphaltbeton fr sehr dnne Schichten (BBTM) This European St

13、andard was approved by CEN on 27 February 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concern

14、ing such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into

15、its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Ger

16、many, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR

17、 NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13108-2:2016 EEN 13108-2:2016 (E) 2 Contents Page European foreword . 4 Introduction 6 1 Scope 7 2 Norma

18、tive references 7 3 Terms, definitions, symbols and abbreviations . 8 3.1 Terms and definitions . 8 3.2 Symbols and abbreviations 10 4 Requirements for constituent materials . 11 4.1 General . 11 4.2 Binder . 11 4.2.1 General . 11 4.2.2 Selection of binder . 11 4.3 Aggregate 12 4.3.1 Coarse aggregat

19、e 12 4.3.2 Fine aggregate . 12 4.3.3 All-in aggregates . 12 4.3.4 Added filler . 12 4.4 Reclaimed asphalt 12 4.5 Additives 13 5 Requirements for the mixture . 13 5.1 General . 13 5.2 Composition, grading, binder content and additives 13 5.2.1 Composition . 13 5.2.2 Grading . 14 5.2.3 Minimum binder

20、content 16 5.3 Properties . 17 5.3.1 Specimens . 17 5.3.2 Void content . 17 5.3.3 Water sensitivity 18 5.3.4 Resistance to abrasion by studded tyres . 18 5.3.5 Mechanical Stability 19 5.3.6 Low temperature properties . 20 5.3.7 Friction after polishing 21 5.3.8 Coating and homogeneity 21 5.3.9 React

21、ion to fire 21 5.3.10 Resistance to fuel for application on airfields . 21 5.3.11 Resistance to de-icing fluid for application on airfields 22 5.4 Temperature of the mixture 23 5.5 Regulated dangerous substances . 23 5.6 Conflicting requirements 24 6 Assessment and verification of constancy of perfo

22、rmance AVCP . 24 7 Identification . 24 DIN EN 13108-2:2016-12EN 13108-2:2016 (E) 3 Annex A (normative) Calculations of the penetration or the softening point of the binder of a mixture when reclaimed asphalt is used 26 A.1 General . 26 A.2 Calculation of the penetration of the binder of a mixture .

23、26 A.3 Calculation of the softening point of the binder of a mixture . 26 Annex ZA (informative) Relationship of this European Standard with Regulation (EU) No. 305/2011 . 28 ZA.1 Scope and relevant characteristics 28 ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) 29 Z

24、A.3 Assignment of AVCP tasks . 30 DIN EN 13108-2:2016-12EN 13108-2:2016 (E) 4 European foreword This document (EN 13108-2:2016) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a nationa

25、l standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent r

26、ights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13108-2:2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential req

27、uirements of Regulation (EU) No 305/2011 for construction products (CPR). For relationship with Regulation (EU) No 305/2011 see informative Annex ZA which is an integral part of this European Standard. Compared with EN 13108-2:2006, the following changes have been made: a) general, empirical and fun

28、damental approaches are not used separately anymore and the properties have been merged into one list with different properties; b) new properties introduced (low temperature properties, friction after polishing); c) additional optional sieves for the characterization of the grading; d) for several

29、properties additional categories are introduced; e) possibility to define specific conditions in documents related to the application of the product; f) CPR reference and new Annex ZA according to CPR rules. This European Standard is one of a series as listed below: EN 13108-1, Bituminous mixtures M

30、aterial specifications Part 1: Asphalt Concrete EN 13108-2, Bituminous mixtures Material specifications Part 2: Asphalt Concrete for Very Thin Layers (BBTM) EN 13108-3, Bituminous mixtures Material specifications Part 3: Soft Asphalt EN 13108-4, Bituminous mixtures Material specifications Part 4: Ho

31、t Rolled Asphalt EN 13108-5, Bituminous mixtures Material specifications Part 5: Stone Mastic Asphalt EN 13108-6, Bituminous mixtures Material specifications Part 6: Mastic Asphalt EN 13108-7, Bituminous mixtures Material specifications Part 7: Porous Asphalt DIN EN 13108-2:2016-12EN 13108-2:2016 (E

32、) 5 EN 13108-8, Bituminous mixtures Material specifications Part 8: Reclaimed Asphalt EN 13108-9, Bituminous mixtures Material specifications Part 9: Asphalt for Ultra-Thin Layer (AUTL) EN 13108-20, Bituminous mixtures Material specifications Part 20: Type Testing EN 13108-21, Bituminous mixtures Ma

33、terial specifications Part 21: Factory Production Control Annex A (normative) details the calculation of the penetration or the softening point in mixtures containing reclaimed asphalt from the penetrations or softening points of the added binder and the recovered binder from the reclaimed asphalt.

34、According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Ger

35、many, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13108-2:2016-12EN 13108-2:2016 (E) 6 Introduction The aim of this European Stand

36、ard is to enable specification of Asphalt Concrete for Very Thin Layers mixtures on a performance basis. In general, however, there are currently more empirical tests available to describe the mixtures. Depending on the experience with the combination of requirements in this European Standard more o

37、r less degrees of freedom for the producer may be given. This European Standard covers a large variety of materials for different applications, traffic and climate conditions. EN 13108-2 gives properties and listings of possible categories. It has to accommodate the road industry for all of Europe.

38、For this reason the menu approach for properties has been chosen. The tables represent categories that are required all over Europe. For this reason numerical values in tables do not always obey statistical rules. Based on conditions of use specific properties and categories may be defined in docume

39、nts related to the application of the product. The categories defined in those documents need to take into account the reproducibility of the test when this is given in the appropriate test method. Care should be taken to only select those tests which are relevant to the application of the asphalt a

40、nd the use of the pavement and to avoid a combination of potentially conflicting requirements. DIN EN 13108-2:2016-12EN 13108-2:2016 (E) 7 1 Scope This European Standard specifies requirements for mixtures of the mix group Asphalt Concrete for Very Thin Layers for use on roads, airfields and other t

41、rafficked areas. Asphalt Concrete for Very Thin Layers is a bituminous material, of which the composition and the grading of the aggregate is selected for application of the material in very thin layers with a thickness of 20 mm to 30 mm. Mixtures utilizing bitumen emulsion and bituminous materials

42、based on in situ recycling are not covered by this standard. Asphalt Concrete for Very Thin Layers is used for surface courses. This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21. 2 No

43、rmative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendment

44、s) applies. EN 10976:2013, Tests for mechanical and physical properties of aggregates Part 6: Determination of particle density and water absorption EN 1426, Bitumen and bituminous binders Determination of needle penetration EN 1427, Bitumen and bituminous binders Determination of the softening poin

45、t Ring and Ball method EN 12591, Bitumen and bituminous binders Specifications for paving grade bitumens EN 12697-3, Bituminous mixtures Test methods for hot mix asphalt Part 3: Bitumen recovery: Rotary evaporator EN 12697-4, Bituminous mixtures Test methods Part 4: Bitumen recovery: Fractionating c

46、olumn EN 12697-8, Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens EN 12697-12, Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens EN 12697-13, Bitumino

47、us mixtures Test methods for hot mix asphalt Part 13: Temperature measurement EN 12697-16, Bituminous mixtures Test methods for hot mix asphalt Part 16: Abrasion by studded tyres EN 12697-22, Bituminous mixtures Test methods for hot mix asphalt Part 22: Wheel tracking EN 12697-30, Bituminous mixture

48、s Test methods for hot mix asphalt Part 30: Specimen preparation by impact compactor EN 12697-31, Bituminous mixtures Test methods for hot mix asphalt Part 31: Specimen preparation by gyratory compactor DIN EN 13108-2:2016-12EN 13108-2:2016 (E) 8 EN 12697-32, Bituminous mixtures Test methods for hot

49、 mix asphalt Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor EN 12697-41, Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids EN 12697-43, Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel EN 12697-46, Bituminous mixtures Test methods for hot mix asp