DIN EN 13035-6-2010 Machines and plants for the manufacture treatment and processing of flat glass - Safety requirements - Part 6 Machines for break-out German version EN 13035-6 2.pdf

《DIN EN 13035-6-2010 Machines and plants for the manufacture treatment and processing of flat glass - Safety requirements - Part 6 Machines for break-out German version EN 13035-6 2.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13035-6-2010 Machines and plants for the manufacture treatment and processing of flat glass - Safety requirements - Part 6 Machines for break-out German version EN 13035-6 2.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、July 2010 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 8

2、1.100!$isj“1708071www.din.deDDIN EN 13035-6Machines and plants for the manufacture, treatment and processing offlat glass Safety requirements Part 6: Machines for break-out (includes Amendment A1:2009)English translation of DIN EN 13035-6:2010-07Maschinen und Anlagen fr die Herstellung, Be- und Vera

3、rbeitung von Flachglas Sicherheitsanforderungen Teil 6: Brechmaschinen (enthlt nderung A1:2009)Englische bersetzung von DIN EN 13035-6:2010-07Machines et installations pour la production, le faonnage et la transformation du verreplat Exigences de scurit Partie 6: Machines rompre (Amendement A1:2009

4、inclus)Traduction anglaise de DIN EN 13035-6:2010-07SupersedesDIN EN 13035-6:2006-11www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 22 pages07.10 DIN EN 13035-6:2010-07 2 A comma is used as the decimal marker. Start of validity This sta

5、ndard takes effect on 1 July 2010. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety” (Secretariat: DIN, Germany). The responsible German body involved in its p

6、reparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-13-13 AA Glasmaschinen of Section Bau- und Baustoffmaschinen. Representatives of manufacturers and users of glass machines, and of the employers liability insurance associations con

7、tributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC, (valid until 28 December 2009) and the “revised Machinery Directive”, Directive 2006/42/EC, which took effect on 29 December 2009,

8、and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directives. Once this standard is cited in the Official Journal of the European Union, it is deemed a “

9、harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. DIN shall n

10、ot be held responsible for identifying any or all such patent rights. The European Standards referred to in clause 2 and in the bibliography of this document have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Amendments This standard differs from DIN EN 130

11、35-6:2006-11 as follows: a) Foreword and Scope of the standard have been updated. b) Normative references have been updated. c) Clause 4, Table 1, has been updated. d) Clause 5.1, third paragraph, has been updated. e) Subclauses 5.2.2.2 and 5.2.2.3 have been updated. f) Subclauses 5.2.2.5 and 5.2.2.

12、6 have been amended. g) Subclause 5.2.2.7 has been updated. DIN EN 13035-6:2010-07 3 h) Subclause 5.4.2 has been updated/amended. i) Subclause 5.4.4 has been updated. j) Subclause 5.4.5 has been updated/amended. k) Subclauses 5.4.7 and 5.4.8 have been amended. l) Subclauses 5.6 and 5.7 have been add

13、ed. m) Clause 6 has been updated. n) Subclause 7.2.2 has been amended. o) Subclauses 7.2.10 and 7.2.11 have been added. p) Subclause 7.3 has been updated/amended. q) A normative Annex A has been added. r) Annex ZA (informative) “Relationship between this European Standard and the Essential Requireme

14、nts of EU Directive 98/37/EC” has been updated. s) Annex ZB (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been included. t) The bibliography has been updated. Previous editions DIN EN 13035-6: 2006-11 DIN EN 13035-6:2010-07

15、4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13035-6:2006+A1 December 2009 ICS 81.100 Supersedes EN 13035-6:2006English Version Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for brea

16、k-out Machines et installations pour la production, le faonnage et la transformation du verre plat - Exigences de scurit - Partie 6: Machines rompre Maschinen und Anlagen fr die Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 6: Brechmaschinen This European Standard

17、 was approved by CEN on 24 May 2006 and includes Amendment 1 approved by CEN on 8 November 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-

18、date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under

19、 the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, H

20、ungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Ce

21、ntre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13035-6:2006+A1:2009: EEN 13035-6:2006+A1:2009 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and d

22、efinitions .64 List of significant hazards 75 Safety requirements and/or protective measures 96 Verification of the safety requirements and/or protective measures 127 Information for use . 12! “Requirements of EU Directive 98/37/EC . 16!Requirements of EU Directive 2006/42/EC“ 17Bibliography . 18Tab

23、les Table 1 List of significant hazards 7 Table 2 Individual testing for requirements stated in Clause 5 12 DIN EN 13035-6:2010-07 Annex ZA (informative) Relationship between this European Standard and the Essential Annex ZB (informative) Relationship between this European Standard and the Essential

24、 Annex A (informative) Noise-test code 14EN 13035-6:2006+A1:2009 (E) 3 Foreword This document (EN 13035-6:2006+A1:2009) has been prepared by Technical Committee CEN/TC 151 “Con-struction equipment and building material machines Safety”, the secretariat of which is held by DIN. This European Standard

25、 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this docum

26、ent may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-11-08. This document supersedes EN 13035-6:2006. The start and finish of text introduced or altered by

27、amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA a

28、nd ZB, which are integral parts of this document.“ It is one of a series concerning machinery for the manufacture, treatment and processing of flat glass (see Bibliography). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound t

29、o implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Repub-lic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swit

30、zerland and United Kingdom. DIN EN 13035-6:2010-07 EN 13035-6:2006+A1:2009 (E) 4 Introduction This European Standard is a type C standard as stated in EN ISO 12100-1. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of th

31、is European Standard. When provisions of this type C standard are different from those stated in type A or B standards, the provi-sions of this type C standard take precedence over the provisions of the other standards for machines that have been designed and built according to the provisions of thi

32、s type C standard. When compiling this European Standard it was assumed that: machines for break-out used in shops for the treatment of flat glass are compact and can be overlooked from the working place of the operator; but sometimes extended plants with remote parts are usual pref-erably in factor

33、ies for the production of flat glass without the possibility of a survey from any position; transport, break-out of flat glass on the machinery generate no hazards by noise, but feeding waste glass into bins manually may make dangerous noise, when the glass is not placed with care but thrown off. Da

34、ngerous noise may also be generated by crushing waste glass or feeding waste glass into containers by conveyors near to the operators working place so that wearing of ear plugs may be necessary; negotiations occur between the manufacturer and the user about measures to avoid dangerous noise at the o

35、perators position by other sources, e.g. by separation and/or insulation of noisy operations, such as charging of waste glass into containers or crushing of waste glass; gas burners for naked flames used to induce stress to glass present no other significant hazards than burns by the flame, because

36、burners have very low capacity, are used in big halls and are always in the operators view so that automatic surveillance of the flame or specific ducts for exhaust are not usual and necessary; as far as applicable obstructions by the structure of guards during servicing work such as fault clearing

37、are prevented by a minimum distance of 0,5 m between the guard and the machinery; the existing ad-hoc standards for components are applied, e.g. EN 619, EN 13035-3, EN 13035-5, when conveyors, cutting operations or unloading equipment are integrated. DIN EN 13035-6:2010-07 EN 13035-6:2006+A1:2009 (E

38、) 5 1 Scope 1.1 This European Standard applies for machines for break-out of flat glass including the following steps: transport and positioning, break-out, transport of the cut sizes to the unloading position, leading away of waste flat glass. 1.2 !This European Standard deals with the significant

39、hazards, hazardous situations and events rele-vant to machines for the break-out of flat glass when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).“ Those hazards which are dealt with in EN 619 for conveyors are except

40、ed. !This European Standard specifies the appropriate techni-cal measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance.“ Hazards from noise are not considered to be significant. 1.3 This European Standard is not applicable to the b

41、reak-out operation (opening the cut) of cutting ma-chines for laminated glass (see EN 13035-7). 1.4 This European Standard is not applicable to the treatment of waste flat glass such as crushing and/or charging of waste flat glass into bins, containers. 1.5 This European Standard does not apply to t

42、he significant hazards of conveyors. If there are specific hazards which arise by the co-operation of conveyors with machines for break-out of flat glass, appropriate measures are specified. 1.6 This European Standard is not applicable to machines for break-out of flat glass which are manufac-tured

43、before the date of publication of this European Standard by CEN. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced docum

44、ent (including any amendments) applies. !deleted text“ EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards !deleted text“ EN 982:1996, Safety of machinery Safety requirements for fluid power systems and their components Hydraulics

45、EN 983:1996, Safety of machinery Safety requirements for fluid power systems and their components Pneumatics EN 999:1998, Safety of machinery The positioning of protective equipment in respect of approach speeds of parts of the human body EN 1037:1995, Safety of machinery Prevention of unexpected st

46、art-up !deleted text“ DIN EN 13035-6:2010-07 EN 13035-6:2006+A1:2009 (E) 6 EN 1760-2:2001, Safety of machinery Pressure sensitive protective devices Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars !EN 60204-1:2006, Safety of machinery Ele

47、ctrical equipment of machines Part 1: General require-ments (IEC 60204-1:2005, modified)“ !EN 61310-1, Safety of machinery Indication, marking and actuation Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007)“ EN 61496-1:2004, Safety of machinery Electro-sensitive protec

48、tive equipment Part 1: General require-ments and tests (IEC 61496-1:2004, modified) !deleted text“ !EN ISO 4871:2009, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11201, Acoustics Noise emitted by machinery and equipment Measuremen

49、t of emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997) EN ISO 11202, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Survey method in situ (ISO 11202:1995) EN ISO 11204, Acoustics Noise emitted by machinery