DIN EN 13035-3-2010 Machines and plants for the manufacture treatment and processing of flat glass - Safety requirements - Part 3 Cutting machines German version EN 13035-3 2003+A1.pdf

《DIN EN 13035-3-2010 Machines and plants for the manufacture treatment and processing of flat glass - Safety requirements - Part 3 Cutting machines German version EN 13035-3 2003+A1.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13035-3-2010 Machines and plants for the manufacture treatment and processing of flat glass - Safety requirements - Part 3 Cutting machines German version EN 13035-3 2003+A1.pdf（33页珍藏版）》请在麦多课文档分享上搜索。

1、February 2010 Translation by DIN-Sprachendienst.English price group 15No part of this may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 81.100!$-

2、y“1571086www.din.deDDIN EN 13035-3Machines and plants for the manufacture, treatment and processing offlat glass Safety requirements Part 3: Cutting machines (includes Amendment A1:2009)English of DIN EN 13035-3:2010-02Maschinen und Anlagen fr die Herstellung, Be- und Verarbeitung von Flachglas Sich

3、erheitsanforderungen Teil 3: Schneidmaschinen (enthlt nderung A1:2009)Englische bersetzung von DIN EN 13035-3:2010-02Machines et installations pour la production, le faonnage et la transformation du verreplat Exigences de scurit Partie 3: Machines dcouper (Amendement A1:2009 inclus)DIN EN 13035-3:20

4、10-02SupersedesDIN EN 13035-3:2004-08www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.33translationtranslationTraduction anglaise de02.10 DIN EN 13035-3:2010-03 A comma is used as the decimal marker. Start of validity This standard

5、takes effect on 1 February 2010. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety” (Secretariat: DIN, Germany). The responsible German body involved in its pre

6、paration was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-13-13 AA Glasmaschinen of Section Bau- und Baustoffmaschinen. Representatives of manufacturers and users of glass machines, and of the employers liability insurance associations contr

7、ibuted to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC, (valid until 28 December 2009) and the “revised Machinery Directive”, Directive 2006/42/EC, which takes effect on 29 December 2009, a

8、nd which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directives. Once this standard is cited in the Official Journal of the European Union, it is deemed a “h

9、armonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. DIN shall no

10、t be held responsible for identifying any or all such patent rights. The European Standards referred to in clause 2 and in the bibliography of this document have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Amendments This standard differs from DIN EN 1303

11、5-3:2004-08 as follows: a) Introduction and Scope of the standard have been updated. b) Normative references have been updated. c) Clause 3 has been updated. d) Clause 4 has been updated. e) Clause 5 and subclauses 5.1.11.1, 5.1.12, 5.1.17 to 5.1.21, 5.2.1 and 5.2.4 have been updated. f) Subclause 5

12、.2.5 has been amended. 2 DIN EN 13035-3:2010-03 g) Subclause 5.3.1 has been updated. h) Subclause 5.4 has been amended. i) Clause 6 has been updated. j) Clause 7 and subclause 7.1 have been updated. k) Subclauses 7.1.14 and 7.1.15 have been amended. l) Subclause 7.2 has been updated. m) The key in A

13、nnex F has been revised. n) The normative Annex K has been included. o) Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by 98/79/EC” has been revised. p) Annex ZB (informative) “Relationship between this European St

14、andard and the Essential Requirements of EU Directive 2006/42/EC” has been included. q) The bibliography has been updated. Previous editions DIN EN 13035-3: 2004-08 3 DIN EN 13035-3:2010-03 4 This page is intentionally blank. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13035-3:2003+A1 Augus

15、t 2009 ICS 81.100 Supersedes EN 13035-3:2003English Version Machines and plants for the manufacture, treatment and processing of flat glass Safety requirements Part 3: Cutting machines Machines et installations pour la production, le faonnage et la transformation du verre plat Exigences de scurit Pa

16、rtie 3: Machines dcouper Maschinen und Anlagen fr die Herstellung, Be- und Verarbeitung von Flachglas Sicherheitsanforderungen Teil 3: Schneidmaschinen This European Standard was approved by CEN on 23 May 2003 and includes Amendment 1 approved by CEN on 23 July 2009. CEN members are bound to comply

17、with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management

18、 Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theoffi

19、cial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slo

20、venia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN

21、national Members. Ref. No. EN 13035-3:2003+A1:2009: EEN 13035-3:2003+A1:2009 (E) 2 Contents Page Foreword 30 Introduction 41 Scope 42 Normative references 43 Terms and definitions . 64 List of significant hazards 65 Safety requirements and/or protective measures 85.1 Common requirements . 85.2 Addit

22、ional special safety requirements for flat glass cutting tables where access is not intended 105.3 Additional special safety requirements for flat glass cutting tables where access is intended . 116 Verification of safety requirements and/or protective measures . 127 Information for use 12Annex A (n

23、ormative) Perimeter fencing 15Annex B (normative) Photo-electric guarding . 16Annex C (normative) Photo-electric guarding with barrier rail 17Annex D (normative) Fixed distance guard 18Annex E (normative) Photo-electric guarding 19Annex F (normative) Reflex photo-electric sensors (single light beam

24、scanners) and push-away bars 20Annex G (normative) Stopping operation by safety measures 21Annex H (informative) Electrical interlocking of movable guards . 22Annex I (informative) Danger zones on cutting machines 23Annex J (informative) Synopsis of possible methods of safeguarding according to 5.2

25、and 5.3 24Annex K (normative) !Noise-test code 25K.1 A-weighted emission sound pressure level determination . 25K.2 A-weighted emission sound power level determination . 25K.3 Installation and mounting conditions 25K.4 Operating conditions . 25K.5 Measurement uncertainties 26K.6 Information to be re

26、corded . 26K.7 Information to be reported 26Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by 98/79/EC . 27Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Di

27、rective 2006/42/EC 28Bibliography 29DIN EN 13035-3:2010-03 EN 13035-3:2003+A1:2009 (E) 3 Foreword This document (EN 13035-3:2003+A1:2009) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety“, the secretariat of which is held by DIN. This

28、European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2010, and conflicting national standards shall be withdrawn at the latest by February 2010. Attention is drawn to the possibility that some of t

29、he elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-07-23. This document supersedes EN 13035-3:2003. The start and finish of text

30、introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EC Directive(s). !For relationship with EU Directives, see in

31、formative Annexes ZA and ZB, which are integral parts of this document.“ !Annexes A to G and K are normative. Annexes H, I and J are informative.“ This document is one of a series concerning machinery for the treatment and processing of flat glass. This document includes a Bibliography. According to

32、 the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lith

33、uania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 13035-3:2010-03 EN 13035-3:2003+A1:2009 (E) 4 0 Introduction This document is a type-C standard as stated in !EN ISO 12100-1“. The machinery concerned a

34、nd the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type-C standard are different from those which are stated in type-A or -B standards, the provisions of this type-C standard take precedence over the provis

35、ions of the other standards for machines that have been designed and built according to the provisions of this type-C standard. 1 Scope 1.1 This standard contains the requirements for safety for the design and installation of machines with one movable bridge for cutting of flat glass, which operate

36、by scoring of the glass placed on a horizontal support. This standard covers the transport of the glass on the machine. 1.2 !This European Standard deals with all significant hazards, hazardous situations and events relevant to flat glass cutting machines, when they are used as intended and under th

37、e conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance.“ Hazards from noise are not consid

38、ered to be significant. 1.3 This standard does not apply to flat glass cutting by abrasive cutting or by the use of high pressure liquid or lasers. 1.4 This standard does not apply to loading and unloading of flat glass on to or from cutting machines and the breaking out (see !EN 13035-5“ and !EN 13

39、035-6“). 1.5 This standard does not apply to conveyors (see EN 619) and fans as used as integral parts of the machinery. If there are specific risks that arise in connection with flat glass cutting machines, appropriate measures are specified. 1.6 This standard does not apply to cutting of laminated

40、 glass (see !EN 13035-7“). 1.7 This standard does not apply to cutting while the glass is moving. 1.8 This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN. 2 Normative references The following referenced documents are indispensable

41、 for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text“ EN 294:1992, Safety of machinery - Safety distances to prevent danger zones being reac

42、hed by the upper limbs EN 349:1993, Safety of machinery - Minimum gaps to avoid crushing of parts of the human body !deleted text“ DIN EN 13035-3:2010-03 EN 13035-3:2003+A1:2009 (E) 5 EN 953:1997, Safety of machinery - Guards - General requirements for the design and construction of fixed and movabl

43、e guards !deleted text“ EN 999:1998, Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body EN 1037:1995, Safety of machinery - Prevention of unexpected start-up !deleted text“ !EN 60204-1:2006, Safety of machinery Electrical equipment

44、of machines Part 1: General requirements (IEC 60204-1:2005, modified) EN 61496-1:2004, Safety of machinery Electro-sensitive protective equipment Part 1: General requirements and tests (IEC 61496-1:2004, modified)“ !deleted text“ !EN ISO 3744:1995, Acoustics Determination of sound power levels of no

45、ise sources using sound pressure Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) EN ISO 3746:1995, Acoustics Determination of sound power levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane

46、 (ISO 3746:1995) EN ISO 3747:2000, Acoustics Determination of sound power levels of noise sources using sound pressure Comparison method for use in situ (ISO 3747:2000) EN ISO 4871:1996, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO

47、 11201:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) EN ISO 11202:1995, Acoustics Noise emitted by mach

48、inery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Survey method in situ (ISO 11202:1995) EN ISO 11204:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at oth

49、er specified positions Method requiring environmental corrections (ISO 11204:1995) EN ISO 11688-1:1998, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safe