DIN EN 12942-2009 Respiratory protective devices - Power assisted filtering devices incorporating full face masks half masks or quarter masks - Requirements testing marking (includ.pdf

《DIN EN 12942-2009 Respiratory protective devices - Power assisted filtering devices incorporating full face masks half masks or quarter masks - Requirements testing marking (includ.pdf》由会员分享，可在线阅读，更多相关《DIN EN 12942-2009 Respiratory protective devices - Power assisted filtering devices incorporating full face masks half masks or quarter masks - Requirements testing marking (includ.pdf（57页珍藏版）》请在麦多课文档分享上搜索。

1、February 2009DEUTSCHE NORM English price group 21No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.340.30!$UvS“150834

2、8www.din.deDDIN EN 12942Respiratory protective devices Power assisted filtering devices incorporating full face masks, halfmasks or quarter masks Amendment A2:2008)English version of DIN EN 12942:2009-02Atemschutzgerte Geblsefiltergerte mit Vollmasken, Halbmasken oder Viertelmasken A2:2008)Englische

3、 Fassung DIN EN 12942:2009-02SupersedesDIN EN 12942:2003-06www.beuth.deRequirements, testing, marking (includes Amendment A1:2002 andAnforderungen, Prfung, Kennzeichnung (enthlt nderung A1:2002 und nderungDocument comprises 57 pagesDIN EN 12942:2009-02 2 National foreword This standard has been prep

4、ared by Technical Committee CEN/TC 79 “Respiratory protective devices” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Feinmechanik und Optik (Optics and Precision Mechanics Standards Committee), Technical Committee NA 027-02-04-01 AK Filt

5、er. Amendments This standard differs from DIN EN 12942:2003-06 as follows: a) Devices for single use have been classified. Previous editions DIN EN 147: 1991-11 DIN EN 12942: 1999-01, 2003-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12942 October 1998 +A1 +A2 November 2002 November 2008

6、ICS 13.340.30 English version Respiratory protective devices - Power assisted filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking Appareils de protection respiratoire Appareils filtrants ventilation assiste avec masques complets, demi-masques

7、 ou quarts de masques Exigences, essais, marquage Atemschutzgerte Geblsefiltergerte mit Vollmasken, Halbmasken oder Viertelmasken Anforderungen, Prfung, Kennzeichnung EN 12942 was approved by CEN on 1998-09-20. Amendment A1:2002 was approved by CEN on 2002-09-23 and Amendment A2:2008 on 2008-09-25.

8、CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on a

9、pplication to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has th

10、e same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portug

11、al, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means

12、 reserved worldwide for CEN national Members. Ref. No. EN 12942:1998+A1:2002+A2:2008 EDIN EN 12942:2009-02 EN 12942:1998+A1:2002+A2:2008 (E) 2 Contents Page Foreword to EN 12942:1998.5 Foreword to EN 12942:1998/A1:20025 Foreword to EN 12942:1998/A2:20086 Introduction .6 1 Scope 6 2 Normative referen

13、ces 6 3 Definitions and description 7 3.1 Definitions 7 3.2 Description .7 4 Designation 8 5 Classification8 6 Requirements.9 6.1 Materials .9 6.1.1 General9 6.1.2 Compatibility with skin9 6.1.3 Cleaning and disinfection 10 6.1.4 Surface finish 10 6.2 Resistance to temperature. 10 6.3 Facepiece. 10

14、6.3.1 General. 10 6.3.2 Full face masks (other than those complying with EN 136:1998) 10 6.3.3 Half masks and quarter masks (other than those complying with EN 140:1998) 12 6.4 Inward leakage 13 6.4.1 Power on 13 6.4.2 Power off 13 6.5 Breathing resistance 13 6.5.1 General. 13 6.5.2 Inhalation resis

15、tance 13 6.5.3 Exhalation resistance. 13 6.6 Air supply 13 6.7 Checking facilities 14 6.8 Resistance to clogging 14 6.9 Electrical components . 14 6.10 Breathing hose 15 6.11 Filters . 15 6.11.1 Penetration and capacity . 15 6.11.2 Filter requirements . 17 6.12 Noise level . 20 6.13 Carbon dioxide c

16、ontent of the inhalation air (dead space) 20 6.14 Resistance to flame 20 6.15 Attachments to the facepiece 20 6.15.1 Full face mask . 20 6.15.2 Half mask and quarter mask 20 6.16 Total mass of device 20 6.17 Practical performance 20 7 Testing . 21 7.1 Conditioning 22 7.1.1 General. 22 7.1.2 Complete

17、 device . 22 7.1.3 Filters . 22 DIN EN 12942:2009-02 EN 12942:1998+A1:2002+A2:2008 (E) 3 7.2 Visual inspection.22 7.3 Inward leakage.22 7.3.1 General .22 7.3.2 Principle .23 7.3.3 Test subjects and number of tests 23 7.3.4 Apparatus.23 7.3.5 Test procedure.24 7.3.6 Test using sulfur hexafluoride as

18、test substance26 7.3.7 Test using sodium chloride as test substance 26 7.4 Practical performance test .29 7.4.1 Principle .29 7.4.2 Test subjects29 7.4.3 Test conditions 29 7.4.4 Procedure.29 7.4.5 Test report30 7.5 Carbon dioxide content of the inhalation air (dead space).30 7.5.1 Principle .30 7.5

19、.2 Test equipment30 7.5.3 Procedure.30 7.5.4 Report .31 7.6 Breathing resistance.31 7.6.1 Inhalation resistance with power switched off.31 7.6.2 Inhalation resistance with power switched on.31 7.6.3 Exhalation resistance with power switched on31 7.6.4 Inhalation resistance after clogging31 7.7 Manuf

20、acturers minimum design duration31 7.7.1 Principle .31 7.7.2 Apparatus.32 7.7.3 Preparation of the device32 7.7.4 Procedure.32 7.8 Air supply flow rate .32 7.8.1 Principle .32 7.8.2 Test equipment32 7.8.3 Preparation of device33 7.8.4 Procedure: Initial flow rate .33 7.8.5 Procedure: Design duration

21、 .33 7.9 Clogging .33 7.10 Resistance to collapse of breathing hose 34 7.10.1 Apparatus.34 7.10.2 Procedure.34 7.11 Strength of hose and couplings 35 7.12 Interactive flow rate.35 7.12.1 General .35 7.12.2 Apparatus.35 7.12.3 Method36 7.13 Mechanical strength of filters 36 7.13.1 Test equipment36 7.

22、13.2 Test procedure.37 7.14 Filters37 7.14.1 General .37 7.14.2 Particle filter efficiency .37 7.14.3 Protection capacity of gas filters, special filters, AX filters, SX filters and combined filters38 7.15 Resistance to flame.41 7.15.1 Principle .41 7.15.2 Apparatus.41 7.15.3 Procedure.41 7.15.4 Ass

23、essment and test report .41 7.16 Noise level42 DIN EN 12942:2009-02 EN 12942:1998+A1:2002+A2:2008 (E) 4 7.16.1 Principle. 42 7.16.2 Apparatus 42 7.16.3 Procedure 42 8 Marking 42 8.1 General. 42 8.2 Facepiece. 42 8.3 Turbo unit and battery casing (if separate from the blower) . 43 8.4 Filters . 43 8.

24、4.1 General. 43 8.4.2 Particle filters 44 8.4.3 Gas and combined filters. 44 8.4.4 Combined filters 44 8.5 Filter or filter package if not already on the filter 44 8.6 All packages 45 9 Information supplied by the manufacturer 45 9.1 Complete device . 45 9.2 Filters . 46 Annex A (informative) Part-m

25、arking. 54 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives. 55 DIN EN 12942:2009-02 EN 12942:1998+A1:2002+A2:2008 (E) 5 Foreword to EN 12942:1998 This European Standard has been prepared by Technical Committee CEN/TC 79

26、“Respiratory protective devices”, the secretariat of which is held by DIN. This European Standard supersedes EN 147:1991. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 1999, and conflictin

27、g national standards shall be withdrawn at the latest by April 1999. The significant difference between this European Standard and EN 147:1991 is: Specifications for devices with gas and combined filters. This European Standard has been prepared under a mandate given to CEN by the European Commissio

28、n and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of t

29、he following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to EN 12942:1998/A1:2002

30、This document (EN 12942:1998/A1:2002) has been prepared by Technical Committee CEN/TC 79 “Respiratory protective devices”, the secretariat of which is held by DIN. This Amendment to the European Standard EN 12942:1998 shall be given the status of a national standard, either by publication of an iden

31、tical text or by endorsement, at the latest by May 2003, and conflicting national standards shall be withdrawn at the latest by May 2003. This Amendment to the European Standard EN 12942 has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association

32、, and supports essential requirements of EU Directive(s). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Ice

33、land, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 12942:2009-02 EN 12942:1998+A1:2002+A2:2008 (E) 6 Foreword to EN 12942:1998/A2:2008 This document (EN 12942:1998/A2:2008) has been prepared by Technical Committee CEN/TC

34、79 “Respiratory protective devices”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009 and conflicting national standards shall be withdrawn at the

35、latest by May 2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of t

36、his document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ir

37、eland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Introduction A given respiratory protective device can only be approved when its individual components satisfy the requirements of th

38、e test specification which can be a complete standard or part of a standard, and practical performance tests have been carried out successfully on a complete device where specified in the appropriate standard. If, for any reason a complete device is not tested then simulation of the device can be do

39、ne provided the respiratory characteristics and weight distribution are similar to those of the complete device. 1 Scope This European Standard specifies minimum requirements for power assisted respiratory protective devices which incorporate a full face mask, half mask or a quarter mask together wi

40、th gas, particle or combined filter(s) used as respiratory protective devices. It does not cover devices designed for use in circumstances where there is or might be an oxygen deficiency (concentration in oxygen less than 17 % by volume). Also, it does not cover respiratory protective devices design

41、ed tor escape purposes. Laboratory tests and practical performance tests are included for the assessment of compliance with the requirements. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are c

42、ited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edit

43、ion of the publication referred to applies. EN 132, Respiratory protective devices Definitions DIN EN 12942:2009-02 EN 12942:1998+A1:2002+A2:2008 (E) 7 EN 134, Respiratory protective devices Nomenclature of components EN 136:1998, Respiratory protective devices Full face masks Requirements, testing,

44、 marking EN 140:1998, Respiratory protective devices Half masks and quarter masks Requirements, testing, marking EN 143, Respiratory protective devices Particle filters Requirements, testing, marking EN 148-1, Respiratory protective devices Threads for facepieces Standard thread connection EN 166, P

45、ersonal eye protection Specifications EN 169, Personal eye protection Filters for welding and related techniques Transmittance requirements and recommended utilisation EN 170, Personal eye protection Ultraviolet filters Transmittance requirements and recommended use EN 171, Personal eye protection I

46、nfrared filters Transmittance requirements and recommended use EN 379, Personal eye-protection Automatic welding filters EN 13274-7, Respiratory protective devices Methods of test Part 7: Determination of particle filter penetration EN 60079-0, Electrical apparatus for explosive gas atmospheres Part

47、 0: General requirements (IEC 60079-0:2004, modified) EN 60079-11, Explosive atmospheres Part 11: Equipment protection by intrinsic safety “i” (IEC 60079-11:2006) EN 60651, Electroacoustics Sound level meters EN ISO 6941, Textile fabrics Burning behaviour Measurement of flame spread properties of ve

48、rtically oriented specimens 3 Definitions and description 3.1 Definitions For the purposes of this European Standard the definitions given in prEN 132:1996 and the nomenclature given in EN 134:1998 apply together with the following: 3.1.1 interactive flow rate the air flow rate resulting from the co

49、mbined action of the turbo unit and a sinusoidal breathing pattern at the facepiece 3.1.2 Re-usable particle or combined filter a particle or combined filter intended to be used for more than a single shift 3.2 Description Each device typically consists of: DIN EN 12942:2009-02 EN 12942:1998+A1:2002+A2:2008 (E) 8 a) one (or more) filter(s) or filters through which all the air supplied to the facepiece passes; b) a power operated turbo unit which supplies filtered ambient air to the facepiece directly or