DIN EN 12899-1-2008 Fixed vertical road traffic signs - Part 1 Fixed signs English version of DIN EN 12899-1 2008-02《固定、立式道路交通标志 第1部分 固定的标志》.pdf

《DIN EN 12899-1-2008 Fixed vertical road traffic signs - Part 1 Fixed signs English version of DIN EN 12899-1 2008-02《固定、立式道路交通标志 第1部分 固定的标志》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 12899-1-2008 Fixed vertical road traffic signs - Part 1 Fixed signs English version of DIN EN 12899-1 2008-02《固定、立式道路交通标志 第1部分 固定的标志》.pdf（59页珍藏版）》请在麦多课文档分享上搜索。

1、February 2008DEUTSCHE NORM English price group 22No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 93.080.30!$K“1409496w

2、ww.din.deDDIN EN 12899-1Fixed, vertical road traffic signs Part 1: Fixed signsEnglish version of DIN EN 12899-1:2008-02Ortsfeste, vertikale Straenverkehrszeichen Teil 1: Ortsfeste VerkehrszeichenEnglische Fassung DIN EN 12899-1:2008-02SupersedesDIN EN 12899-1:2002-05See start of validitywww.beuth.de

3、Document comprises 59 pagesDIN EN 12899-1:2008-02 2 Start of validity This standard is due to be valid from 1 June 2008. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Bundesanzeiger (German Federal Law

4、Gazette) and from the date given therein. National foreword This standard has been prepared by Technical Committee CEN/TC 226 “Road equipment” (Secretariat: AFNOR, France), Working Group “Traffic signs” (lead-management: BSI, United Kingdom). The responsible German body involved in its preparation w

5、as the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Technical Committee NA 005-10-23 GA Verkehrszeichen und Ein-richtungen. Amendments This standard differs from DIN EN 12899-1:2002-05 as follows: a) Annexes A and B have been deleted. b) Annex ZA concerning the CE c

6、onformity marking has been included. c) The standard has been revised in form and substance. Previous editions DIN EN 12899-1: 2002-05 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12899-1 November 2007 ICS 93.080.30 Supersedes EN 12899-1:2001 English Version Fixed, vertical road traffic sign

7、s - Part 1: Fixed signs Signaux fixes de signalisation routire verticale - Partie 1: Panneaux fixes Ortsfeste, vertikale Straenverkehrszeichen - Teil 1: Ortsfeste Verkehrszeichen This European Standard was approved by CEN on 4 February 2007. CEN members are bound to comply with the CEN/CENELEC Inter

8、nal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN memb

9、er. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN membe

10、rs are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Sw

11、itzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref.

12、 No. EN 12899-1:2007: EEN 12899-1:2007 (E) 2 Contents Page Foreword. 4 Introduction 5 1 Scope 6 2 Normative references . 6 3 Terms, definitions, symbols and abbreviations 7 4 Retroreflective sign face material . 8 4.1 Glass bead material 8 4.2 Microprismatic material 12 5 Structural performance 12 5

13、.1 General. 12 5.2 Partial safety factors. 14 5.3 Loads 14 5.4 Deflections. 16 6 Supports 20 6.1 Tops 20 6.2 Base compartments 20 6.3 Performance under vehicle impact . 20 6.4 Corrosion resistance 21 6.5 Base plates 21 7 Sign plates, sign faces, transilluminated signs, externally illuminated signs a

14、nd supports. 21 7.1 Design 21 7.2 Sign faces 24 7.3 Transilluminated signs. 25 7.4 Externally illuminated signs 28 8 Sign assemblies 30 9 Marking, labelling and product information. 30 9.1 General. 30 9.2 Marking and labelling . 30 9.3 Product information 30 9.4 Luminaires . 31 10 Evaluation of conf

15、ormity 31 11 Dangerous substances. 31 A.1 Wind load . 32 A.2 Snow clearance, dynamic load, load combination 41 Annex A (normative) Test points for horizontal and vertical loads. 32 DIN EN 12899-1:2008-02 EN 12899-1:2007 (E) 3 EU Construction Products Directive .44 ZA.1 Scope and relevant characteris

16、tics .44 ZA.2 Procedure for attestation of conformity of fixed vertical road traffic signs51 ZA.3 CE marking and labelling52 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the DIN EN 12899-1:2008-02 EN 12899-1:2007 (E) 4 Foreword This document (EN 12899-1:2007)

17、 has been prepared by Technical Committee CEN/TC 226 Road equipment the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2008, and conflicting national st

18、andards shall be withdrawn at the latest by August 2009. This document supersedes EN 12899-1:2001. This European Standard has been prepared under a Mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directives. For relati

19、onships with EU Directives, see informative Annex ZA, which is an integral part of this standard. This European Standard consists of the following Parts under the general title: Fixed, vertical road traffic signs Part 1: (This part) Fixed signs Part 2: Transilluminated traffic bollards (TTB) Part 3:

20、 Delineator posts and retroreflectors Part 4: Factory production control Part 5: Initial type testing It is based on performance requirements and test methods published in CEN, CENELEC, CIE (International Commission on Illumination) and ISO documents together with standards of the CEN member organiz

21、ations. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,

22、 Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 12899-1:2008-02 EN 12899-1:2007 (E) 5 Introduction This European Standard is designed for use by road authorities. It can also be us

23、ed by private developers who wish to use signs on their own land similar to those used on public highways. This European Standard: can be used to implement type approval and certification testing; derives from performance requirements and test methods published in CEN, CENELEC, CIE and ISO documents

24、 together with standards of the CEN member organizations; does not require the replacement of existing signs; covers performance requirements and test methods; defines performance limits and a range of performance classes. Colorimetric and retroreflective properties, as well as the luminance and ill

25、uminance, are specified; The retroreflective requirements and tests in respect of materials based on glass bead technology are specified in this standard. The performance of retroreflective materials using microprismatic technology is specified in the relevant ETA which enables CE marking of such ma

26、terial. Wind actions can be specified by the use of either values in this standard or by the methods specified in EN 1991-1-4. Structural requirements for signs complete with sign supports include performance under static and dynamic loading. Provision is made for safety in use, including vehicle im

27、pact. DIN EN 12899-1:2008-02 EN 12899-1:2007 (E) 6 1 Scope This Part 1 of EN 12899 specifies requirements for complete sign assemblies (including supports), signs (sign plates with sign faces), sign plates (without sign faces) and for other major components (retroreflective sheeting, supports and lu

28、minaires). The main intended use of fixed signs is for the instruction and guidance of road users on public and private land. Matters not covered by this standard: a) sign gantry and cantilever structures; b) signs with discontinuous messages, e.g. using light emitting diodes (LED), or fibre optics;

29、 c) variable message signs; d) signs used for temporary purposes; e) foundations; f) tests for extremely low temperatures. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undat

30、ed references, the latest edition of the referenced document (including any amendments) applies. EN 1011, Welding - Recommendations for welding of metallic materials EN 1991-1-4, Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions EN 1993-1-1, Eurocode 3: Design of steel str

31、uctures Part 1-1: General rules and rules for buildings EN 1995-1-1, Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings EN 1999-1-1, Eurocode 9: Design of aluminium structures Part 1-1: General rules General rules and rules for buildings EN 10240, Inte

32、rnal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants EN 12665:2002, Light and lighting Basic terms and criteria for specifying lighting requirements EN 12767, Passive safety of support structures for road equipment - Req

33、uirements and test methods EN 12899-4, Fixed vertical road traffic signs Part 4: Factory production control EN 12899-5, Fixed vertical road traffic signs Part 5: Initial type testing EN 13032-1, Light and lighting - Measurement and presentation of photometric data of lamps and luminaires Part 1: Mea

34、surement and file format EN 13201-3, Road lighting Part 3: Calculation of performance DIN EN 12899-1:2008-02 EN 12899-1:2007 (E) 7 EN 60529, Degrees of protection provided by enclosures (IP code) (IEC 60529:1989) EN ISO 139, Textiles - Standard atmospheres for conditioning and testing (ISO 139:2005)

35、 EN ISO 877:1996, Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994) EN ISO 1461 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test m

36、ethods (ISO 1461:1999) EN ISO 4892-2, Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2006) EN ISO 6272, Paints and varnishes - Rapid-deformation (impact resistance) tests EN ISO 9001, - Quality management systems - Requirements (ISO 9001:2000) ISO 4:

37、1997, Information and documentation Rules for the abbreviation of title words and titles of publications CIE 15, Colorimetry CIE 54.2, Retroreflection Definition and measurement CIE 74:1988, Road signs 3 Terms, definitions, symbols and abbreviations For the purposes of this document, the symbols and

38、 abbreviations given in ISO 4:1997 apply. The photometric terms and definitions given in EN 12665:2002 and the sign descriptions given in CIE 74:1988 also apply, together with the following. 3.1 sign assembly complete assembly including the sign plate, sign face material and supports 3.2 sign sign p

39、late with the sign face material applied 3.3 sign plate fabrication comprising the substrate, reinforcing members and fixings 3.4 protective edge fabrication intended to reinforce the edge of the sign and to reduce the severity of personal injury in the event of bodily impact with the sign edge 3.5

40、substrate material used to support the sign face material 3.6 sign face material material or materials applied to the substrate to produce the finished surface of the fixed sign DIN EN 12899-1:2008-02 EN 12899-1:2007 (E) 8 3.7 standard shape sign faces circles, triangles, squares, diamonds and octag

41、ons containing legends in accordance with the provisions of the Vienna Convention 3.8 mounting height (H) distance from ground level to the lower edge of the sign plate 3.9 support component which supports the sign plate 3.10 temporary deflection displacement of the structural component under load w

42、hich returns to zero when the load is removed 3.11 permanent deflection deflection which remains after the load is removed 3.12 production identification code code defined by the manufacturer in order to achieve traceability 4 Retroreflective sign face material 4.1 Glass bead material 4.1.1 Visual p

43、erformance 4.1.1.1 Test conditions Tests shall be carried out at a temperature of (23 3) C and a relative humidity of (50 5) % unless otherwise specified. 4.1.1.2 Test samples Tests shall be conducted on finished products, or on prepared samples representative of finished products and suitable for t

44、he test equipment. Test samples and test panels shall be conditioned in accordance with EN ISO 139 and shall be identified on the back. 4.1.1.3 Daylight chromaticity and luminance factor When tested in accordance with the relevant procedure specified in CIE 15, using CIE standard daylight illuminant

45、 D65 and the standard CIE 45/0 viewing conditions, the chromaticity and the luminance factor shall conform to Table 1 or Table 2 as appropriate. DIN EN 12899-1:2008-02 EN 12899-1:2007 (E) 9 Table 1 Daylight chromaticity and luminance factors. Class CR1 Colour 1 2 3 4 Luminance factor x y x y x y x y

46、 Table 3 Table 4 White 0,355 0,355 0,305 0,305 0,285 0,325 0,335 0,375 0,35 0,27 Yellow see Table 3 0,522 0,477 0,470 0,440 0,427 0,483 0,465 0,534 0,27 Yellow see Table 4 0,545 0,454 0,487 0,423 0,427 0,483 0,465 0,534 0,16 Orange 0,610 0,390 0,535 0,375 0,506 0,404 0,570 0,429 0,17 0,14 Red 0,735

47、0,265 0,674 0,236 0,569 0,341 0,655 0,345 0,05 0,03 Blue 0,078 0,171 0,150 0,220 0,210 0,160 0,137 0,038 0,01 0,01 Green 0,007 0,703 0,248 0,409 0,177 0,362 0,026 0,399 0,04 0,03 Dark green 0,313 0,682 0,313 0,453 0,248 0,409 0,127 0,557 0,01 0,07 Brown 0,455 0,397 0,523 0,429 0,479 0,373 0,558 0,39

48、4 0,03 0,09 Grey 0,350 0,360 0,300 0,310 0,285 0,325 0,335 0,375 0,12 0,18 Table 2 Daylight chromaticity and luminance factors. Class CR2 1 2 3 4 Luminance factor Colour x y x y x y x y Table 3 Table 4 White 0,305 0,315 0,335 0,345 0,325 0,355 0,295 0,325 0,35 0,27 Yellow see Table 3 0,494 0,505 0,4

49、70 0,480 0,493 0,457 0,522 0,477 0,27 Yellow see Table 4 0,494 0,505 0,470 0,480 0,513 0,437 0,545 0,454 0,16 Red 0,735 0,265 0,700 0,250 0,610 0,340 0,660 0,340 0,05 0,03 Blue see Table 3 0,130 0,086 0,160 0,086 0,160 0,120 0,130 0,120 0,01 Blue see Table 4 0,130 0,090 0,160 0,090 0,160 0,140 0,130 0,140 0,01 Green see Table 3 0,110 0,415 0,150 0,415 0,150 0,455 0,110 0,455 0,04 Green see Table 4 0,110 0,415 0,170 0,415 0,170 0,500 0,110 0,500 0,03 Dark green 0,190 0,580 0,190 0,520