DIN EN 12697-22-2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 22 Wheel tracking German version EN 12697-22 2003+A1 2007《沥青混合物 热混合沥青用试验方法 第22部分 轮迹》.pdf

《DIN EN 12697-22-2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 22 Wheel tracking German version EN 12697-22 2003+A1 2007《沥青混合物 热混合沥青用试验方法 第22部分 轮迹》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 12697-22-2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 22 Wheel tracking German version EN 12697-22 2003+A1 2007《沥青混合物 热混合沥青用试验方法 第22部分 轮迹》.pdf（31页珍藏版）》请在麦多课文档分享上搜索。

1、October 2007DEUTSCHE NORM English price group 13No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 93.080.20!$IW“1389052w

2、ww.din.deDDIN EN 12697-22Bituminous mixtures Test methods for hot mix asphalt Part 22: Wheel tracking (includes Amendment A1:2007)English version of DIN EN 12697-22:2007-10Asphalt Prfverfahren fr Heiasphalt Teil 22: Spurbildungstest (enthlt nderung A1:2007)Englische Fassung DIN EN 12697-22:2007-10Su

3、persedesDIN EN 12697-22:2004-04www.beuth.deDocument comprises 31 pages DIN EN 12697-22:2007-10 2 National foreword This standard has been prepared by CEN/TC 227 “Road materials” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Bui

4、lding and Civil Engineering Standards Committee), Technical Committee NA 005-10-10 AA Asphalt. Amendments This standard differs from DIN EN 12697-22:2004-04 as follows: a) The foreword has been modified. b) Clause 2 has been modified. c) In Table 2, 3rdcolumn, the unit for TR and TRmis now “m/cycle”

5、. d) The unit in subclause 6.3.1.2 is now “(80 5) IRHD”. e) In subclause 6.4.2 the diameter is now 200 mm. f) Subclause 7.1.1.1 has been modified. g) In subclause 7.1.2.2 the diameter is now 200 mm. Previous editions DIN EN 12697-22: 2004-04 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12697

6、-22:2003+A1 July 2007 ICS 93.080.20 Supersedes EN 12697-22:2003English Version Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking Mlanges bitumineux - Mthodes dessai pour mlange hydrocarbon chaud - Partie 22: Essai dornirage Asphalt - Prfverfahren fr Heiasphalt - Teil 2

7、2: Spurbildungstest This European Standard was approved by CEN on 21 November 2003 and includes Amendment 1 approved by CEN on 16 May 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a natio

8、nal standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in a

9、ny other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, E

10、stonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION E

11、UROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-22:2003+A1:2007: EEN 12697-22:2003+A1:2007 (E) 2 Contents Page Foreword3 1 Scope 6 2 No

12、rmative references 6 3 Terms and definitions .6 4 Symbols and abbreviated terms 8 5 Principle9 6 Apparatus .9 6.1 Large size devices .9 6.2 Extra large Devices10 6.3 Small size devices .11 6.4 Small-size devices for use with cores .12 7 Sampling and sample preparation.13 7.1 Sampling and manufacture

13、.13 7.2 Thickness and surface regularity.15 7.3 Transport and storage of unmounted specimens15 7.4 Sample preparation .15 8 Procedure for carrying out a single measurement 16 8.1 Large size devices .16 8.2 Extra-large size device 17 8.3 Small size devices .17 9 Calculation and expression of results.

14、18 9.1 Large size devices .18 9.2 Extra-large size device 19 9.3 Small size devices .20 10 Test report 22 10.1 Obligatory information 22 10.2 Complementary information.24 11 Precision.24 11.1 General24 11.2 Laboratory prepared samples, proportional rut depth, large size devices .24 11.3 Samples core

15、d from a pavement and laboratory prepared samples, wheel-tracking rate, small-size devices, conditioning in air 24 Bibliography29 EN 12697-22:2003+A1:2007 (E) 3 Foreword This document (EN 12697-22:2003+A1:2007) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of

16、which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2008 and conflicting national standards shall be withdrawn at the latest by January 2008. This document includes Amend

17、ment 1, approved by CEN on 2007-05-16. This document supersedes EN 12697-22:2003. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This European Standard is one of a series of standards as listed below: EN 12697-1, Bituminous mixtures Test methods

18、 for hot mix asphalt Part 1: Soluble binder content EN 12697-2, Bituminous mixtures Test methods for hot mix asphalt Part 2: Determination of particle size distribution EN 12697-3, Bituminous mixtures Test methods for hot mix asphalt Part 3: Bitumen recovery: Rotary evaporator EN 12697-4, Bituminous

19、 mixtures Test methods for hot mix asphalt Part 4: Bitumen recovery: Fractionating column EN 12697-5, Bituminous mixtures Test methods for hot mix asphalt Part 5: Determination of the maximum density EN 12697-6, Bituminous mixtures Test methods for hot mix asphalt Part 6: Determination of bulk densi

20、ty of bituminous specimens EN 12697-7, Bituminous mixtures Test methods for hot mix asphalt Part 7: Determination of bulk density of bituminous specimens by gamma rays EN 12697-8, Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specime

21、ns EN 12697-9, Bituminous mixtures Test methods for hot mix asphalt Part 9: Determination of the reference density EN 12697-10, Bituminous mixtures Test methods for hot mix asphalt Part 10: Compactibility EN 12697-11, Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the

22、 affinity between aggregates and bitumen EN 12697-12, Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens EN 12697-13, Bituminous mixtures Test methods for hot mix asphalt Part 13: Temperature measurement EN 12697-14, Bituminou

23、s mixtures Test methods for hot mix asphalt Part 14: Water content EN 12697-22:2003+A1:2007 (E) 4 EN 12697-15, Bituminous mixtures Test methods for hot mix asphalt Part 15: Determination of the segregation sensitivity EN 12697-16, Bituminous mixtures Test methods for hot mix asphalt Part 16: Abrasio

24、n by studded tyres EN 12697-17, Bituminous mixtures Test methods for hot mix asphalt Part 17: Particle loss of porous asphalt specimen EN 12697-18, Bituminous mixtures Test methods for hot mix asphalt Part 18: Binder drainage EN 12697-19, Bituminous mixtures Test methods for hot mix asphalt Part 19:

25、 Permeability of specimen EN 12697-20, Bituminous mixtures Test methods for hot mix asphalt Part 20: Indentation using cube or Marshall specimen EN 12697-21, Bituminous mixtures Test methods for hot mix asphalt Part 21: Indentation using plate specimens EN 12697-22, Bituminous mixtures Test methods

26、for hot mix asphalt Part 22: Wheel tracking EN 12697-23, Bituminous mixtures Test methods for hot mix asphalt Part 23: Determination of the indirect tensile strength of bituminous specimens EN 12697-24, Bituminous mixtures Test methods for hot mix asphalt Part 24: Resistance to fatigue EN 12697-25,

27、Bituminous mixtures Test methods for hot mix asphalt Part 25: Cyclic compression test EN 12697-26, Bituminous mixtures Test methods for hot mix asphalt Part 26: Stiffness EN 12697-27, Bituminous mixtures Test methods for hot mix asphalt Part 27: Sampling EN 12697-28, Bituminous mixtures Test methods

28、 for hot mix asphalt Part 28: Preparation of samples for determining binder content, water content and grading EN 12697-29, Bituminous mixtures Test methods for hot mix asphalt Part 29: Determination of the dimensions of a bituminous specimen EN 12697-30, Bituminous mixtures Test methods for hot mix

29、 asphalt Part 30: Specimen preparation by impact compactor EN 12697-31, Bituminous mixtures Test methods for hot mix asphalt Part 31: Specimen preparation by gyratory compactor EN 12697-32, Bituminous mixtures Test methods for hot mix asphalt Part 32: Laboratory compaction of bituminous mixtures by

30、vibratory compactor EN 12697-33, Bituminous mixtures Test methods for hot mix asphalt Part 33: Specimen prepared by roller compactor EN 12697-34, Bituminous mixtures Test methods for hot mix asphalt Part 34: Marshall test EN 12697-35, Bituminous mixtures Test methods for hot mix asphalt Part 35: Lab

31、oratory mixing EN 12697-36, Bituminous mixtures Test methods for hot mix asphalt Part 36: Determination of the thickness of a bituminous pavement EN 12697-37, Bituminous mixtures Test methods for hot mix asphalt Part 37: Hot sand test for the adhesivity of binder on pre-coated chippings for HRA EN 1

32、2697-22:2003+A1:2007 (E) 5 EN 12697-38, Bituminous mixtures Test methods for hot mix asphalt Part 38: Common equipment and calibration EN 12697-39, Bituminous mixtures Test methods for hot mix asphalt Part 39: Binder content by ignition EN 12697-40, Bituminous mixtures Requirements In situ drainabil

33、ity EN 12697-41, Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to deicing fluids EN 12697-42, Bituminous mixtures Test methods for hot mix asphalt Part 42: Amount of coarse foreign matter in reclaimed asphalt EN 12697-43, Bituminous mixtures Test methods for hot mix asphal

34、t Part 43: Resistance to fuel !deleted text“ For the small-size device, the use of a wheel fitted with a solid rubber tyre is specified. Depending on the result of on-going research, the use of a steel wheel may be accepted. This document includes a bibliography. According to the CEN/CENELEC Interna

35、l Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta

36、, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 12697-22:2003+A1:2007 (E) 6 1 Scope This European Standard describes test methods for determining the susceptibility of bituminous materials to deform under load. The test is appli

37、cable to mixtures with upper sieve size less than or equal to 32 mm. The tests are applicable to specimens that have either been manufactured in a laboratory or cut from a pavement; test specimens are held in a mould with their surface flush with the upper edge of the mould. The susceptibility of bi

38、tuminous materials to deform is assessed by the rut formed by repeated passes of a loaded wheel at constant temperature. Three alternative types of device can be used according to this standard: large-size devices, extra large-size devices and small-size devices. With large-size devices and extra la

39、rge-size devices, the specimens are conditioned in air during testing. With small-size devices, specimens are conditioned, in either air or water. NOTE Large-size and extra large-size devices are not suitable for use with cylindrical cores. 2 Normative references This European Standard incorporates

40、by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Sta

41、ndard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). !EN 12697-6:2003+A1“, Bituminous mixtures Test methods for hot mix asphalt Part 6: Determination of bulk density of bituminous specime

42、ns. EN 12697-7, Bituminous mixtures Test methods for hot mix asphalt Part 7: Determination of bulk density of bituminous specimens by gamma rays. EN 12697-27, Bituminous mixtures Test methods for hot mix asphalt Part 27: Sampling. !EN 12697-32:2003+A1“, Bituminous mixtures Test methods for hot mix a

43、sphalt Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor. !EN 12697-33:2003+A1, Bituminous mixtures Test methods for hot mix asphalt Part 33: Specimen preparation by roller compactor.“ !EN 12697-35:2004+A1“, Bituminous mixtures Test methods for hot mix asphalt Part 35: Lab

44、oratory mixing. ISO 48, Rubber, vulcanised or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD). ISO 7619, Rubber Determination of indentation hardness by means of pocket hardness meters. 3 Terms and definitions For the purposes of this European Standard, the following

45、terms and definitions apply. 3.1 nominal thickness for laboratory prepared specimens, target thickness, in millimetres, to which the specimens are to be prepared EN 12697-22:2003+A1:2007 (E) 7 3.2 rut depth reduction in the thickness of a test specimen, in millimetres, caused by repeated passes of a

46、 loaded wheel 3.3 test surface surface of the test specimen on which the loaded wheel runs 3.4 single test result value obtained by applying this European Standard, once, to a single test portion 3.5 test portion for this test, a test portion to represent one material shall consist of a set of: Tabl

47、e 1 Minimum set of specimen Device Minimum set of test specimen Large or extra-large size device 2 Small size model A testing in air 6 Small size model B testing in air 2 Small size model B testing in water 2 3.6 tyre track impression of the tyre on a flat surface when a vertical load is applied 3.7

48、 load cycle two passes (outward and return) of the loaded wheel EN 12697-22:2003+A1:2007 (E) 8 4 Symbols and abbreviated terms Table 2 Symbols and abbreviated terms Symbol Definition Unit mij local distance between a reference plane and the j specified location of the upper face of the test piece at

49、 the time of the i measurement sequence (large device) NOTE j varies between 1 and 15. mm m0j initial measurement at the j location Pi measured proportional rut depth calculated as the average depth of a rut at the i measurement sequence measured at predetermined points or the average of predetermined stretch (large size device) or the average of predeter