DIN EN 12697-12-2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 12 Determination of the water sensitivity of bituminous specimens English version of DIN EN 12697.pdf

《DIN EN 12697-12-2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 12 Determination of the water sensitivity of bituminous specimens English version of DIN EN 12697.pdf》由会员分享，可在线阅读，更多相关《DIN EN 12697-12-2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 12 Determination of the water sensitivity of bituminous specimens English version of DIN EN 12697.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、October 2008DEUTSCHE NORM English price group 11No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 93.080.20!$RRq“1474778

2、www.din.deDDIN EN 12697-12Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimensEnglish version of DIN EN 12697-12:2008-10Asphalt Prfverfahren fr Heiasphalt Teil 12: Bestimmung der Wasserempfindlichkeit von Asphalt-ProbekrpernEngl

3、ische Fassung DIN EN 12697-12:2008-10SupersedesDIN EN 12697-12:2004-03www.beuth.deDocument comprises 19 pagesDIN EN 12697-12:2008-10 2 National foreword This standard has been prepared by Technical Committee CEN/TC 227 “Road materials” (Secretariat: DIN, Germany). The responsible German body involve

4、d in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Technical Committee NA 005-10-10 AA Asphalt. Amendments This standard differs from DIN EN 12697-12:2004-03 as follows: a) Two test methods have been added: Compressive strength test (Method B)

5、 Bond test (Method C) Previous editions DIN EN 12697-12: 2004-03 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12697-12 June 2008 ICS 93.080.20 Supersedes EN 12697-12:2003 English Version Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity

6、of bituminous specimens Mlanges bitumineux - Mthodes dessai pour mlange hydrocarbon chaud - Partie 12: Dtermination de la sensibilit leau des prouvettes bitumineuses Asphalt - Prfverfahren fr Heiasphalt - Teil 12: Bestimmung der Wasserempfindlichkeit von Asphalt-Probekrpern This European Standard wa

7、s approved by CEN on 18 May 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such natio

8、nal standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and n

9、otified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

10、Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of

11、 exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-12:2008: EEN 12697-12:2008 (E) Contents Foreword3 1 Scope 6 2 Normative references 6 3 Terms and definitions7 4 Principle7 5 Apparatus .8 5.1 Method A.8 5.2 Method B.8 5.3 Method C.9 6 Specimen

12、preparation .9 6.1 Method A.9 6.2 Method B.10 6.3 Method C.12 7 Test procedure.12 7.1 Method A.12 7.2 Method B.13 7.3 Method C (see Figure 1) 13 8 Calculation14 8.1 Method A.14 8.2 Method B.14 8.3 Method C.14 9 Test report 14 9.1 Methods A and B14 9.2 Method C.15 10 Precision.15 10.1 Method A.15 10.

13、2 Method B.15 10.3 Method C.16 Bibliography 17 Page DIN EN 12697-12:2008-10 2EN 12697-12:2008 (E) Foreword This document (EN 12697-12:2008) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status

14、of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2008, and conflicting national standards shall be withdrawn at the latest by December 2008. Attention is drawn to the possibility that some of the elements of this document may be the subj

15、ect of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12697-12:2003. This document is one of a series of standards as listed below: EN 12697-1, Bituminous mixtures Test methods for hot mix asphalt Part 1: Sol

16、uble binder content EN 12697-2, Bituminous mixtures Test methods for hot mix asphalt Part 2: Determination of particle size distribution EN 12697-3, Bituminous mixtures Test methods for hot mix asphalt Part 3: Bitumen recovery: Rotary evaporator EN 12697-4, Bituminous mixtures Test methods for hot m

17、ix asphalt Part 4: Bitumen recovery: Fractionating column EN 12697-5, Bituminous mixtures Test methods for hot mix asphalt Part 5: Determination of the maximum density EN 12697-6, Bituminous mixtures Test methods for hot mix asphalt Part 6: Determination of bulk density of bituminous specimens EN 12

18、697-7, Bituminous mixtures Test methods for hot mix asphalt Part 7: Determination of bulk density of bituminous specimens by gamma rays EN 12697-8, Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens EN 12697-9, Bituminous mixtur

19、es Test methods for hot mix asphalt Part 9: Determination of the reference density EN 12697-10, Bituminous mixtures Test methods for hot mix asphalt Part 10: Compactibility EN 12697-11, Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the affinity between aggregate and

20、bitumen EN 12697-12, Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens EN 12697-13, Bituminous mixtures Test methods for hot mix asphalt Part 13: Temperature measurement EN 12697-14, Bituminous mixtures Test methods for hot m

21、ix asphalt Part 14: Water content DIN EN 12697-12:2008-10 3EN 12697-12:2008 (E) EN 12697-15, Bituminous mixtures Test methods for hot mix asphalt Part 15: Determination of the segregation sensitivity EN 12697-16, Bituminous mixtures Test methods for hot mix asphalt Part 16: Abrasion by studded tyres

22、 EN 12697-17, Bituminous mixtures Test methods for hot mix asphalt Part 17: Particle loss of porous asphalt specimen EN 12697-18, Bituminous mixtures Test methods for hot mix asphalt Part 18: Binder drainage EN 12697-19, Bituminous mixtures Test methods for hot mix asphalt Part 19: Permeability of s

23、pecimen EN 12697-20, Bituminous mixtures Test methods for hot mix asphalt Part 20: Indentation using cube or Marshall specimens EN 12697-21, Bituminous mixtures Test methods for hot mix asphalt Part 21: Indentation using plate specimens EN 12697-22, Bituminous mixtures Test methods for hot mix aspha

24、lt Part 22: Wheel tracking EN 12697-23, Bituminous mixtures Test methods for hot mix asphalt Part 23: Determination of the indirect tensile strength of bituminous specimens EN 12697-24, Bituminous mixtures Test methods for hot mix asphalt Part 24: Resistance to fatigue EN 12697-25, Bituminous mixtur

25、es Test methods for hot mix asphalt Part 25: Cyclic compression test EN 12697-26, Bituminous mixtures Test methods for hot mix asphalt Part 26: Stiffness EN 12697-27, Bituminous mixtures Test methods for hot mix asphalt Part 27: Sampling EN 12697-28, Bituminous mixtures Test methods for hot mix asph

26、alt Part 28: Preparation of samples for determining binder content, water content and grading EN 12697-29, Bituminous mixtures Test method for hot mix asphalt Part 29: Determination of the dimensions of a bituminous specimen EN 12697-30, Bituminous mixtures Test methods for hot mix asphalt Part 30:

27、Specimen preparation by impact compactor EN 12697-31, Bituminous mixtures Test methods for hot mix asphalt Part 31: Specimen preparation by gyratory compactor EN 12697-32, Bituminous mixtures Test methods for hot mix asphalt Part 32: Laboratory compaction of bituminous mixtures by vibratory compacto

28、r EN 12697-33, Bituminous mixtures Test methods for hot mix asphalt Part 33: Specimen prepared by roller compactor EN 12697-34, Bituminous mixtures Test methods for hot mix asphalt Part 34: Marshall test EN 12697-35, Bituminous mixtures Test methods for hot mix asphalt Part 35: Laboratory mixing EN

29、12697-36, Bituminous mixtures Test methods for hot mix asphalt Part 36: Determination of the thickness of a bituminous pavement EN 12697-37, Bituminous mixtures Test methods for hot mix asphalt Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA DIN EN 12697-12:2008-10

30、 4EN 12697-12:2008 (E) EN 12697-38, Bituminous mixtures Test methods for hot mix asphalt Part 38: Common equipment and calibration EN 12697-39, Bituminous mixtures Test methods for hot mix asphalt Part 39: Binder content by ignition EN 12697-40, Bituminous mixtures Test methods for hot mix asphalt P

31、art 40: In-situ drainability EN 12697-41, Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids EN 12697-42, Bituminous mixtures Test methods for hot mix asphalt Part 42: Amount of coarse foreign matters in reclaimed asphalt EN 12697-43, Bituminous mixtures Test

32、 methods for hot mix asphalt Part 43: Resistance to fuel According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fr

33、ance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 12697-12:2008-10 5EN 12697-12:2008 (E) 1 Scope This European Standard describes

34、 three test methods for determining the effect of saturation and accelerated water conditioning. These methods can be used to evaluate the effect of moisture with or without anti-stripping additives including liquids, such as amines, and fillers, such as hydrated lime or cement: method A uses the in

35、direct tensile strength of cylindrical specimens of bituminous mixtures; method B uses the compression strength of cylindrical specimens of bituminous mixtures; method C defines the bonding value of soft asphalt mixtures 1 h after mixing, where the bonding of bitumen and aggregate can be equated to

36、a bonding value. Method A and method B give the same result on average. However, if the slenderness of the specimens is less than 0,5, method B is not suitable. Method C is suitable for soft asphalt mixtures with bitumen of viscosity at 60 C of 4000 mm2/s or less, for which methods A and B are not s

37、uitable. NOTE Methods A and B are suitable for soft asphalt mixtures with bitumen of viscosity at 60 C greater than 4000 mm2/s. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For

38、undated references, the latest edition of the referenced document (including any amendments) applies. EN 1426, Bitumen and bituminous binders Determination of needle penetration EN 12697-6, Bituminous mixtures Test methods for hot mix asphalt Part 6: Determination of bulk density of bituminous speci

39、mens EN 12697-8, Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens EN 12697-23, Bituminous mixtures Test methods for hot mix asphalt Part 23: Determination of the indirect tensile strength of bituminous specimens EN 12697-27, B

40、ituminous mixtures Test methods for hot mix asphalt Part 27: Sampling EN 12697-29, Bituminous mixtures Test method for hot mix asphalt Part 29: Determination of the dimensions of a bituminous specimen EN 12697-30, Bituminous mixtures Test methods for hot mix asphalt Part 30: Specimen preparation by

41、impact compactor EN 12697-31, Bituminous mixtures Test methods for hot mix asphalt Part 31: Specimen preparation by gyratory compactor EN 12697-32, Bituminous mixtures Test methods for hot mix asphalt Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor EN 12697-33, Bituminou

42、s mixtures Test methods for hot mix asphalt Part 33: Specimen prepared by roller compactor DIN EN 12697-12:2008-10 6EN 12697-12:2008 (E) EN 13108-1, Bituminous mixtures Material specification Part 1: Asphalt concrete 3 Terms and definitions For the purposes of this document, the following terms and

43、definitions apply. 3.1 cylindrical specimen laboratory-made (e.g. gyratory- or impact-compacted) cylindrical moulded specimen or core taken from a bituminous layer or slab 3.2 water sensitivity (in accordance with method A) the ITSR value obtained on compacted specimens of a bituminous mixture 3.3 w

44、ater sensitivity (in accordance with method B) the i/C value obtained on compacted specimens of wet (water conditioned) specimens to that of dry specimens of a bituminous mixture 3.4 indirect tensile strength ratio (ITSR) ratio of the indirect tensile strength of wet (water conditioned) specimens to

45、 that of dry specimens, expressed in percent 3.5 indirect tensile strength (IST) maximum tensile stress applied to a cylindrical specimen loaded at the specified test temperature and speed of displacement of the compression testing machine, determined in accordance with EN 12697-23 3.6 compressive s

46、trength ratio (i/C) ratio of the strength of a specimen loaded in compression at the specified test temperature and speed of displacement of the press, of wet (water conditioned) specimens to that of dry specimens expressed in percent 3.7 bonding value amount of aggregate fines and bitumen which com

47、es loose from 1000 g sample of soft asphalt mixture when mixed with 1500 ml of water in a graduated glass beaker 3.8 precision closeness of agreement between independent test results obtained under stipulated conditions. NOTE 1: Precision depends only on the distribution of random errors and does no

48、t relate to the true value or the specified value. NOTE 2: The measure of precision is usually expressed in terms of imprecision and computed as a standard deviation of the test results. Less precision is reflected by a larger standard deviation. NOTE 3: “Independent test results“ means results obta

49、ined in a manner not influenced by any previous result on the same or similar test object. Quantitative measures of precision depend critically on the stipulated conditions. Repeatability and reproducibility conditions are particular sets of extreme conditions. DIN EN 12697-12:2008-10 7EN 12697-12:2008 (E) 4 Principle Method A: A se