DIN EN 12243-1999 Touch and close fasteners - Determination of dimensional change in washing and drying and dry cleaning German version EN 12243 1999《接触锁扣 洗、干燥和干洗中尺寸变化的测定》.pdf
《DIN EN 12243-1999 Touch and close fasteners - Determination of dimensional change in washing and drying and dry cleaning German version EN 12243 1999《接触锁扣 洗、干燥和干洗中尺寸变化的测定》.pdf》由会员分享,可在线阅读,更多相关《DIN EN 12243-1999 Touch and close fasteners - Determination of dimensional change in washing and drying and dry cleaning German version EN 12243 1999《接触锁扣 洗、干燥和干洗中尺寸变化的测定》.pdf(7页珍藏版)》请在麦多课文档分享上搜索。
1、DEUTSCHE NORM December 1999 I DIN Touch and close fasteners Determination of dimensional change in washing and drying - I EN 12243 and dry cleaning English version of DIN EN 12243 ICs 61 .O40 Haftverschlsse - Bestimmung der Manderung beim Waschen und Trocknen und Chemischreinigen Supersedes parts Ju
2、ne 1990 edition, withdrawn in January 1997. of DIN 3415-2, European Standard EN 12243 : 1999 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by CEN/TC 248. The responsible German body involved in its preparation was the Norme
3、nausschuss Textil und Textil- maschinen (Textile and Textile Machinery Standards Committee), Technical Committee Textile Haftver- schlsse. Amendments Parts of DIN 341 5-2, June 1990 edition, have been superseded by the specifications of DIN EN 12243. Previous edition DIN 341 5-2: 1990-06. EN compris
4、es 5 pages. No pari of this standard may be reproduced without the prior permission of Y Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, s the exclusive right of sale for German Standards (DIN-Normen). Ref. No. DIN EN 12243 : 1999-1 English price group 05 Sales
5、 No. 1105 05.00 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12243 October 1999 ICs 61 .O40 English version Touch and close fasteners Determination of dimensional change in washing and drying and dry clean ing Fermetures auto-agrippantes - Dtermination du changement dimensionnel lors du lava
6、ge et du schage ou lors du nettoyage sec Haftverschlsse - Bestimmung der Manderung beim Waschen und Trocknen und Chemischreinigen This European Standard was approved by CEN on 1999-09-05. CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for givi
7、ng this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stand- ards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official vers
8、ions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium,
9、the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central
10、Secretariat: rue de Stassart 36, B-1050 Brussels O 1999. CEN - All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. EN 12243 : 1999 E Page 2 EN 12243 : 1999 Foreword This European Standard has been prepared by Technical Committee CENTC 248 “Te
11、xtiles and textile products“, the secretariat of which is held by BSL This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2000, and conflicting national standards shall be withdrawn at the lates
12、t by April 2000. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece. Iceland, Ireland, Italy, Luxembourg, Netherla
13、nds, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. It is one of a series of standards for touch and close fasteners. Other standards in the series are as follows: EN 1414 Touch and close fasteners - Cycling procedures for subsequent testing. EN 1415 Touch and close fasteners -
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DINEN122431999TOUCHANDCLOSEFASTENERSDETERMINATIONOFDIMENSIONALCHANGEINWASHINGANDDRYINGANDDRYCLEANINGGERMANVERSIONEN122431999
链接地址:http://www.mydoc123.com/p-664456.html