DIN EN 1092-1 Berichtigung 1-2014 Flanges and their joints - Circular flanges for pipes valves fittings and accessories PN designated - Part 1 Steel flanges German version EN 1092-.pdf

《DIN EN 1092-1 Berichtigung 1-2014 Flanges and their joints - Circular flanges for pipes valves fittings and accessories PN designated - Part 1 Steel flanges German version EN 1092-.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1092-1 Berichtigung 1-2014 Flanges and their joints - Circular flanges for pipes valves fittings and accessories PN designated - Part 1 Steel flanges German version EN 1092-.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、August 2014 English price group 99No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 23.040.60!%;ID“2243833www.din.deD

2、This corrigendum should be filed together withthe translation of the standard to which it refersand a corresponding note made on thetranslation.DIN EN 1092-1 Corrigendum 1Flanges and their joints Circular flanges for pipes, valves, fittings and accessories,PN designated Part 1: Steel flanges,English

3、 version EN 1092-1:2007+A1:2013,Corrigendum to DIN EN 1092-1:2013-04;English version EN 1092-1:2007+A1:2013/AC:2014,English translation of DIN EN 1092-1 Berichtigung 1:2014-08Flansche und ihre Verbindungen Runde Flansche fr Rohre, Armaturen, Formstcke und Zubehrteile, nachPN bezeichnet Teil 1: Stahl

4、flansche,Englische Fassung EN 1092-1:2007+A1:2013,Berichtigung zu DIN EN 1092-1:2013-04;Englische Fassung EN 1092-1:2007+A1:2013/AC:2014,Englische bersetzung von DIN EN 1092-1 Berichtigung 1:2014-08Brides et leurs assemblages Brides circulaires pour tubes, appareils de robinetterie, raccords et acce

5、ssoires,dsignes PN Partie 1: Brides en acier,Version anglaise EN 1092-1:2007+A1:2013,Corrigendum DIN EN 1092-1:2013-04;Version anglaise EN 1092-1:2007+A1:2013/AC:2014,Traduction anglaise de DIN EN 1092-1 Berichtigung 1:2014-08www.beuth.deDocument comprises 2 pages09.14Translation by DIN-Sprachendien

6、st.In case of doubt, the German-language original shall be considered authoritative.DIN EN 1092-1 Cor. 1:2014-08 2 This Corrigendum is based on EN 1092-1:2007+A1:2013/AC:2014. In the English version of DIN EN 1092-1:2013-04 the following correction is to be made: Re Table 22 In Table 22, line “Facing”, dimension “Z”, correct the tolerance“05,0+” with “5,00”.