DIN 7331-2011 Compression rivets《压缩铆钉》.pdf
《DIN 7331-2011 Compression rivets《压缩铆钉》.pdf》由会员分享,可在线阅读,更多相关《DIN 7331-2011 Compression rivets《压缩铆钉》.pdf(9页珍藏版)》请在麦多课文档分享上搜索。
1、March 2011 Translation by DIN-Sprachendienst.English price group 6No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 2
2、1.060.40!$rA1“1793014www.din.deDDIN 7331Compression rivetsEnglish translation of DIN 7331:2011-03Hohlniete, zweiteiligEnglische bersetzung von DIN 7331:2011-03Rivets deux pices tubulairesTraduction anglaise de DIN 7331:2011-03SupersedesDIN 7331:1993-05www.beuth.deDocument comprises pagesIn case of d
3、oubt, the German-language original shall be considered authoritative.09.11 9DIN 7331:2011-03 A comma is used as the decimal marker. Contents Page Foreword. 3 1 Scope . 4 2 Normative references . 4 3 Dimensions 4 4 Technical delivery conditions . 7 5 Designation . 7 6 Application 8 Bibliography . 9 2
4、 DIN 7331:2011-03 Foreword This standard has been prepared by Working Committee NA 067-00-09 AA Verbindungselemente ohne Gewinde of the Normenausschuss Mechanische Verbindungselemente (Fasteners Standards Committee). Attention is drawn to the possibility that some of the elements of this document ma
5、y be the subject of patent rights. DIN shall not be held responsible for identifying any or all such patent rights. The DIN 4000-163 tabular layout of product properties shall apply to rivets covered in this standard. Amendments This standard differs from DIN 7331:1993-05 as follows: a) the technica
6、l delivery conditions have been revised; b) normative references have been updated. Previous editions DIN 7331: 1947-11, 1953x-06, 1975-10, 1993-05 3 DIN 7331:2011-03 1 Scope This standard applies to compression rivets consisting of rivet body (AN or BN) and rivet head (K), the head being provided w
7、ith a bore to receive the rivet body. In order to ensure proper asssembly, body and head shall originate from the same manufacturer. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies.
8、 For undated references, the latest edition of the referenced document (including any amendments) applies DIN 101, Rivets Technical specifications DIN 4000-163, Tabular layout of product properties Part 163: Fasteners without thread DIN EN 1652, Copper and copper alloys Plate, sheet, strip and circl
9、es for general purposes DIN EN 10139, Cold rolled uncoated mild steel narrow steel strip for cold forming Technical delivery conditions DIN EN 12168, Copper and copper alloys Hollow rod for free machining purposes 3 Dimensions See Figure 1, Figure 2 and Table 1. The shank end diameter cannot be spec
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DIN73312011COMPRESSIONRIVETS 压缩 铆钉 PDF