DIN 34822-2005 Cheese head screws with flange with 12 point socket《带法兰的12孔座凸头螺钉》.pdf

《DIN 34822-2005 Cheese head screws with flange with 12 point socket《带法兰的12孔座凸头螺钉》.pdf》由会员分享，可在线阅读，更多相关《DIN 34822-2005 Cheese head screws with flange with 12 point socket《带法兰的12孔座凸头螺钉》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、 DEUTSCHE NORM November 2005DIN 34822 ICS 21.060.10 Cheese head screws with flange, with 12 point socket Zylinderschrauben mit Flansch mit Innenvielzahn mit Gewinde bis Kopf Document comprises 5 pagesTranslation by DIN-Sprachendienst. In case of doubt, the German-language original should be consulte

2、d as the authoritative text. No part of this translation may be reproduced without prior permission of DIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). English price group 5 www.din.de www.be

3、uth.de !,j9k“04.06 9712272DIN 34822:2005-11 2 Foreword This standard has been prepared by Technical Committee NA 067-03-01 AA Verbindungselemente mit Au-engewinde of the Normenausschuss Mechanische Verbindungselemente (Fasteners Standards Committee). The DIN 4000-160-2 tabular layout of article char

4、acteristics shall apply to screws covered in this standard. 1 Scope This standard specifies dimensions and technical delivery conditions for M6 to M16 and M12 1,5 to M16 1,5 cheese head screws with flange, with 12 point socket, of property classes 8.8, 10.9 and A2-70, and product grade A. 2 Normativ

5、e references The following reference documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. DIN 962, Designation system for faste

6、ners E DIN 4000-160, Tabular layouts of article characteristics for fasteners with external thread DIN 34824, 12 point socket for bolts and screws DIN EN 20225, Bolts, screws, studs and nuts Symbols and designations for dimensioning DIN EN 26157-3, Fasteners Surface discontinuities Part 3: Bolts, sc

7、rews and studs for special requirements DIN EN ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs DIN EN ISO 3506-1, Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs DIN EN ISO 4042,

8、 Fasteners Electroplated coatings DIN EN ISO 4753, Fasteners Ends of parts with external ISO metric screw thread DIN EN ISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws, studs and fit bolts Product grades A, B and C DIN EN ISO 10683, Fasteners Non-electrically applied zinc flake coatings D

9、IN EN ISO 16048, Passivation of corrosion-resistant stainless steel fasteners DIN EN ISO 16426, Fasteners Quality assurance system DIN ISO 261, ISO general purpose metric screw threads General plan DIN ISO 965-2, ISO general purpose metric screw threads Tolerances Part 2: Limits of sizes for general

10、 purpose external and internal screw threads Medium quality DIN 34822:2005-11 3 DIN ISO 8992, Fasteners General requirements for bolts, screws, studs and nuts 3 Dimensions Screw dimensions shall be as given in figure 1 and table 1. See DIN EN 20225 for symbols. aTop edge of head rounded or chamfered

11、 (optional) bType CH thread end to DIN EN ISO 4753 cLength of incomplete thread, u 2 P dPressing contour eds pitch diameter fc1is measured at dwmin.g = 15 to 30 h Design of bottom edge of flange at manufacturers discretion iDatum for dwFigure 1 Screw dimensions (notation) DIN 34822:2005-11 4 Tabelle

12、 1 Screw dimensions Dimensions in millimetres M6 M8 M10 M12 M14 M16 Thread size, d M12 1,5 M14 1,5 M16 1,5Coarse pitch thread 1 1,25 1,5 1,75 2 2 paFine pitch thread 1,5 1,5 1,5 l 16 l 20 l 25 l 25 l 30 l 30 max. 2 2,50 3,0 3,50 4 4 l 16 l 20 l 25 l 25 l 30 l 30 max. 3 3,75 4,5 5,25 6 6 a min. 1 1,2

13、5 1,5 1,75 2 2 min. 1,4 1,9 2,4 2,75 3,45 3,75 c1max. 2,4 2,9 3,4 3,75 4,65 4,95 c2max. 0,5 0,6 0,6 0,6 0,6 0,8 damax. 6,8 9,2 11,2 13,7 15,7 17,7 max. 11,00 14,50 17,00 19,00 22,50 25,50 dkmin. 10,57 14,07 16,57 18,48 21,98 24,98 max. 14,2 18,00 22,3 26,6 30,5 35,0 dcmin. 13,1 16,90 21,0 25,3 28,9

14、23,4 dwmin. 12,2 15,8 19,6 23,8 27,6 31,9 h max. 4,20 5,48 6,78 8,08 9,48 10,58 k max. 6,0 8,00 10,00 12,00 14,00 16,00 min. 5,7 7,64 9,64 11,57 13,57 15,57 r1min. 0,25 0,4 0,4 0,6 0,6 0,6 r20,6 to 0,8 0,6 to 1,1 0,6 to 1,2 1,0 to 1,5 1,0 to 1,8 1,0 to 2,0 v max. 0,6 0,8 1 1,2 1,4 1,6 Size N8 N10 N1

15、2 N14 N16 N18 C Auxiliary dimension 7,40 9,84 11,70 13,54 15,99 17,18 max. 3,4 4,48 5,48 6,48 7,58 8,58 12 point socket t min. 3,0 4,00 5,00 6,00 7,00 8,00 l Nominal size min. max. Mass ( = 7,85 kg/dm3), in kg per 1 000 unitsb 8 7,71 8,29 5,69 10 9,71 10,29 6,02 12,7 12 11,65 12,35 6,35 13,4 25,0 16

16、 15,65 16,35 7,01 14,6 27,0 41,8 20 19,58 20,42 7,67 15,8 28,3 44,8 70,1 25 24,58 25,42 8,50 17,4 30,7 48,5 75,2 107 30 29,58 30,42 9,32 18,9 31,1 52,2 80,3 114 35 34,5 35,5 10,1 20,5 35,5 55,9 85,4 120 40 39,5 40,5 11,0 22,0 37,9 59,6 87,5 127 45 44,5 45,5 11,8 23,6 40,3 63,3 95,6 134 50 49,5 50,5

17、12,6 25,1 42,7 67,0 101 141 55 54,4 55,6 13,4 26,7 45,1 70,7 106 147 60 59,4 60,6 14,2 28,2 47,5 74,4 111 154 65 64,4 65,6 15,1 29,8 49,9 78,1 116 161 70 69,4 70,6 15,9 31,3 52,3 81,8 121 168 80 79,4 80,6 34,4 54,7 89,2 131 181 90 89,3 90,7 57,1 96,6 141 195 100 99,3 100,7 152 209 NOTE Commercial si

18、zes of screws are those for which values of mass have been specified. aThread pitch. bFor information only. DIN 34822:2005-11 5 4 Technical delivery conditions Table 2 Technical delivery conditions Material Steel Stainless steel General requirements DIN ISO 8992 Tolerance 6g Thread As specified in D

19、IN ISO 261 and DIN ISO 965-2. Property class 8.8, 10.9 A2-70 Mechanical properties As specified in DIN EN ISO 898-1. DIN EN ISO 3506-1. Product grade A Limit deviations and geometrical tolerances As specified in DIN EN ISO 4759-1. Wrench engagement As specified in DIN 34824. As processed. Plain DIN

20、EN ISO 4042 shall apply with regard to electroplating. Surface finish DIN EN ISO 10683 shall apply with regard to zinc flake coatings. Passivation in accordance with DIN EN ISO 16048 is recommended. Surface discontinuities DIN EN 26157-3 shall apply with regard to surface discontinuities. Quality as

21、surance system DIN EN ISO 16426 shall apply. 5 Designation Designation of an M6 cheese head screw with flange, with 12 point socket, with a length, l, of 20 mm, of property class 8.8: Screw DIN 34822 M6 20 8.8 For more designation details, see DIN 962. 6 Marking Marking of screws shall be in accordance with DIN EN ISO 898-1, analogous to that of hexagon socket head cap screws and hexalobular socket head cap screws.