DIN 262-1-1973 Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm Nominal Dimensions《螺距为7mm 的带间隙和直侧面的圆螺纹 标称尺寸》.pdf

《DIN 262-1-1973 Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm Nominal Dimensions《螺距为7mm 的带间隙和直侧面的圆螺纹 标称尺寸》.pdf》由会员分享，可在线阅读，更多相关《DIN 262-1-1973 Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm Nominal Dimensions《螺距为7mm 的带间隙和直侧面的圆螺纹 标称尺寸》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、UDC 621.882.082.6 : 625.2 DEUTSCHE NORMEN Mav 1973 Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm Nominal Dimensions - DIN 262 Part 1 _ Rundgewinde mit Spiel und steiler Flanke mit Steigung 7 mm; Nennmae Screw threads in accordance with this Standard are mainly used on brake-lever

2、 connecting rods, turnbuckles and draw hooks. Dimensions in mm Designation of a right-handed round screw thread of 59 mm nominal diameter of screw thread and 7 mm pitch 1): Rd 59 X 7 DIN 262 Rd 59 X 7 left DIN 262 Designation of a left-handed round screw thread of 59 mm nominal diameter of screw thr

3、ead and 7 mm pitch: If it is essential to use further nominal diameters of screw threads, then diameters ending with the numbers 4 or 9 should be selected. 1) In the case of components which have both right-handed and left-handed screw threads, the word ,right“ should Limiting dimensions of screw th

4、reads and allowances, permissible deviations and permissible wears of screw thread gauges according to DIN 262 Part 2. also be included in the designation of the right-handed screw thread, e. g. Rd 59 X7 right DIN 262 DIN 262 Teil 1 engl. Preisgr. 4 Vertr.-Nr. 0104 Sole sale rights of German Standards (DIN-Normen) are with Beuth Verlag GmbH. Berlin 30 and Kln 1 09.80