DIN 1211-2-2003 Step irons for staggered manhole steps - Part 2 Precast concrete manhole step irons《人孔错列阶梯脚扣 第2部分 浇入混凝土预制件的阶梯脚扣》.pdf

《DIN 1211-2-2003 Step irons for staggered manhole steps - Part 2 Precast concrete manhole step irons《人孔错列阶梯脚扣 第2部分 浇入混凝土预制件的阶梯脚扣》.pdf》由会员分享，可在线阅读，更多相关《DIN 1211-2-2003 Step irons for staggered manhole steps - Part 2 Precast concrete manhole step irons《人孔错列阶梯脚扣 第2部分 浇入混凝土预制件的阶梯脚扣》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 No part of this translation may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Ref. No. DIN 1211-2:2003-05English price group 05 Sales No. 010503

2、.06Continued on pages 2 and 3. ICS 97.145Steigeisen fr zweiluge Steigeisengnge Teil 2: Steigeisen zum Einbau in BetonfertigteileForewordThis standard has been prepared by Technical Committee V 1 Entwsserungsgegenstnde of the Normen-ausschuss Wasserwesen (Water Practice Standards Committee). It suppl

3、ements DIN EN 13101, prepared by CEN/TC 165 Waste water engineering, which species general requirements and test methods for manhole step irons but does not include all relevant dimensions.DIN 1211 Step irons for staggered manhole steps consists of the following Parts:Part 1: Brickwork and in-situ c

4、oncrete manhole step ironsPart 2: Precast concrete manhole step ironsPart 3: Bolt-on step ironsFurther standards specifying the dimensions of other types of manhole step irons are listed in the bibliog-raphy.AmendmentsThis standard differs from the October 1986 edition as follows.a) The specications

5、 have been harmonized with those given in DIN EN 13101.b) References have been updated. In particular, the material specication is now to DIN EN 1561.c) The standard has been editorially revised.Previous editionDIN 1211-2: 1986-101 ScopeThis standard species requirements for step irons for staggered

6、 manhole steps designed to be tted into precast concrete manholes giving access to sewerage systems. General requirements and test methods for such step irons are specied in DIN EN 13101.2 Normative referencesThis standard incorporates, by dated or undated reference, provisions from other publicatio

7、ns. These nor-mative references are cited at the appropriate places in the text, and the titles of the publications are listed below. For dated references, subsequent amendments to or revisions of any of these publications apply to this standard only when incorporated in it by amendment or revision.

8、 For undated references, the latest edition of the publication referred to applies (including any amendments).DIN V 1264 Steps for underground man entry chambers Application in construction works for waste-water disposalDIN 1451-1 Typefaces Slab-serif GeneralDIN EN 1561 Founding Grey cast irons1211-

9、2Step irons for staggered manhole stepsPart 2: Precast concrete manhole step ironsTranslation by DIN-Sprachendienst.In case of doubt, the German-language original should be consulted as the authoritative text.DEUTSCHE NORM May 2003Supersedes October 1986 edition.Page 2DIN 1211-2:2003-05DIN EN 13101

10、Steps for underground man entry chambers Requirements, marking, testing and evaluation of conformityDIN ISO 8062 Castings System of dimensional tolerances and machining allowances (ISO 8062:1994)3 Dimensions and designationThe design shown is for illustrative purposes only, but the dimensions shall

11、be as specied in gure 1.General tolerances shall be class CT 10 tolerances as in DIN ISO 8062.Type EDimensions in millimetresKey to gure1 Space for production coding, date of casting2 Space for CE marking3 Space for EN 13101 I C GIS4 Space for manufacturers symbol5 Space for symbol of third-party in

12、spection agencyFigure 1: Dimensions of type E step iron (notation)Designation of a type E step iron (E) for staggered steps designed to be tted into precast concrete man-holes:Step iron DIN 1211 ESection AA (rotated by 90)Page 3DIN 1211-2:2003-054 MaterialEN GJL-200 cast iron as in DIN EN 1561.5 Fin

13、ishCast iron elements need not be protected against corrosion, any surface treatment (e.g. for decorative pur-poses) being at the manufacturers discretion.6 MassThe mass of a step iron designed in accordance with this standard shall be approximately 2,6 kg.7 Requirements, testing and inspectionThe s

14、pecications of DIN EN 13101 and DIN V 1264 shall apply.Third-party inspection shall be carried out as specied in Annex I of DIN EN 13101.8 MarkingThe specications of DIN EN 13101 shall apply. Step irons complying with this standard shall, in addition, be marked with the DIN number (DIN 1211), the le

15、tter E indicating the type, and the quality mark.In order to improve the slip resistance of the tread, the manufacturers symbol and the symbol denoting the third-party inspection agency shall be of adequate size and have a proled surface.See DIN 1451-1 for lettering.9 Arrangement and installation of

16、 step ironsStep irons shall be arranged and installed as specied in DIN V 1264. They shall not be driven into fresh con-crete by means of a hammer.BibliographyDIN 1212-1 Step irons with upstand for staggered manhole steps Brickwork and in-situ concrete manhole step ironsDIN 1212-2 Step irons with upstand for staggered manhole steps Precast concrete manhole step ironsDIN 1212-3 Step irons with upstand for staggered manhole steps Bolt-on step ironsDIN 19555 Step irons for straight manhole steps in in-situ concrete manholes