CSA C22 2 NO 208-2014 Fire alarm and signal cable (Third Edition).pdf

《CSA C22 2 NO 208-2014 Fire alarm and signal cable (Third Edition).pdf》由会员分享，可在线阅读，更多相关《CSA C22 2 NO 208-2014 Fire alarm and signal cable (Third Edition).pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、C22.2 No. 208-14Fire alarm and signalcableLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approvedby the Standards Council of Canada. This process brings together volunteers representing varied v

2、iewpoints and interests to achieve consensusand develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus,it doesnot independently test, evaluate, or verify the content of standards.Disclaimerand exclusion of liabilityThis documen

3、t is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditions concerning this documents fitness for a particularpurpose or use, its merchantability, or its non-infringementof any third partys intel

4、lectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the informationpublished in this document. CSA Group makes no representations or warranties regarding this documents compliancewith any applicablestatute, rule, or regulation.IN NO EVENT SHALL CSA G

5、ROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OROFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES,HOWSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE,BU

6、SINESS INTERRUPTION, LOST OR DAMAGED DATA,OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS,WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OFLIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEENADVISED OF THE POSSI

7、BILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other servicesfor or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity. The

8、 information in this document is directedto those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoeverarising in any way from any and all use of or reliance on the information contained in this document.CSA Group is a private

9、 not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does itundertake, to enforce compliancewith the contents of the standards or other documents it publishes.Intellectualpropertyrights and ownershipAs between CSA Group and the users of this d

10、ocument (whether it be in printed or electronic form), CSA Group is the owner, or the authorizedlicensee,of all works contained herein that are protected by copyright, all trade-marks (except as otherwisenoted to the contrary), and allinventions and trade secrets that may be contained in this docume

11、nt, whether or not such inventions and trade secrets are protected by patentsand applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate lawsthat protect CSA Groups and/or others intellectual property and may give rise to

12、a right in CSA Group and/or others to seek legal redress forsuch use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights inthis document.Patent rightsAttention is drawn to the possibility that some of the elements o

13、f this standard may be the subject of patent rights. CSA Group shall not be heldresponsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any suchpatent rights is entirely their own responsibility.Authorizeduse of th

14、is documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and browse th

15、is document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies,and only if this Legal Notice appears on each such copy.In addition, users may not and may not per

16、mit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may n

17、ot load or use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutesyour acceptanceof the terms and conditions of this Legal Notice.Standards UpdateServiceC22.2 No. 208-14July 2014Title:

18、Fire alarm and signal cableTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2423207.If you require assistance, please e-mail techsupportcsagroup.org or

19、call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legalto find out how we protect your personalinformation.ISBN 978-1-77139-636-3 2014 CSA GroupAll rights reserved.No part of this publication may be reproduced in any form whatsoever withoutthe prior permission of the publisher.Pub

20、lished in July 2014 by CSA GroupA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mar k of the C

21、anadian S tandards Association, operating as “CSA Group”Fire alarm and signal cableC22.2 No. 208-14C22.2 No. 208-14Fire alarm and signal cableJuly 2014 2014 CSA Group 1ContentsTechnical Committee on Wiring Products 3Subcommittee on Control, Instrument, Communication,and Marine Cables 5Preface 81 Sco

22、pe 102 Reference publications 113 Definitions 124 Construction 124.1 Conductors 124.1.1 General 124.1.2 Uncoated copper wires 124.1.3 Tin- or lead-alloy-coated annealed copper wires 124.1.4 Nickel-coated copper 124.1.5 Silver-coated copper 124.1.6 Sizes 134.1.7 Stranding 134.1.8 Separator 134.1.9 Di

23、ameter and area 134.2 Insulation 134.2.1 General 134.2.2 Thickness 134.3 Assembly of multiple-conductor cables 144.4 Binder or separator 144.5 Conductor identification 144.6 Bonding conductor 144.7 Shield 144.7.1 General 144.7.2 Composition of a shield 144.7.3 Coverage of a shield 154.7.4 Tape shiel

24、d and drain wire 154.8 Jacket 154.9 Mechanical protection (optional) 154.9.1 General 154.9.2 Interlocked armour 154.9.3 Aluminum or copper sheath 164.9.4 Overall covering over interlocked armour, aluminum, or copper sheath 165 Marking 165.1 Marking on cable 165.2 Marking on tags 166 Tests 17C22.2 No

25、. 208-14Fire alarm and signal cableJuly 2014 2014 CSA Group 26.1 Conductors 176.1.1 DC resistance 176.1.2 Diameter and area 176.2 Insulation 176.2.1 Tensile strength and elongation of insulation 176.2.2 Conductor corrosion 176.3 Performance tests on armour 186.3.1 Protective coating on steel strip 1

26、86.3.2 Interior surface 186.4 Jacket 186.4.1 Tensile strength and elongation of jacket 186.4.2 Weather (sunlight) resistance Optional 186.4.3 Compliance 186.5 Completed cable 196.5.1 Heat-shock resistance Types with thermoplastic insulations and/or jackets 196.5.2 Deformation 196.5.3 Cold bend 196.5

27、.4 FT1 flame test Completed wire or cable (mandatory) 206.5.5 FT4 vertical flame test Cables in cable tray (optional) 206.5.6 FT6 flame and smoke test (optional) 206.5.7 FT4-ST1 rating (optional) 206.5.8 Fire rating (optional) 206.5.9 Overall coverings (optional) 206.5.10 Electrical tests 206.5.11 A

28、rmour flexibility, tension, and mechanical damage tests 21Annex A (informative) Diameters of solid conductors and cross-sectional areas of strandedconductors 31C22.2 No. 208-14Fire alarm and signal cableJuly 2014 2014 CSA Group 3Technical Committeeon Wiring ProductsK.L. Rodel Hubbell Canada LP,Picke

29、ring, OntarioRepresenting Producer InterestChairP. Desilets Leviton Manufacturing of Canada Limited,Pointe-Claire, QubecRepresenting Producer InterestVice-ChairW.J. Bryans Electro-Federation Canada,Toronto, OntarioAssociateW.J. Burr Burr and Associates,Campbell River, British ColumbiaRepresenting Ge

30、neral InterestC. Davis Electro Cables Incorporated,Trenton, OntarioRepresenting Producer InterestS.W. Douglas International Association of Electrical Inspectors,Toronto, OntarioRepresenting General InterestD. Drysdale Nexans Canada Inc,Milton, OntarioRepresenting Producer InterestS.P. Hawkins Shawfl

31、ex A Division of ShawCor Ltd.,Toronto, OntarioAssociateR.J. Kelly Government of Nunavut-Dept of Community b) elimination of lead-coated copper wires;c) inclusion of an alternative dielectric strength test;d) inclusion of armour tests; ande) inclusion of requirements for limited smoke cable, i.e., ca

32、ble that meets the flame test classificationFT4-ST1.For general information on the Standards of the Canadian Electrical Code, Part II, see the Preface of CAN/CSA-C22.2 No. 0-10, General Requirements Canadian Electrical Code, Part II.This Standard was prepared by the Subcommittee on Control, Instrume

33、nt, Communication, and MarineCables, under the jurisdiction of the Technical Committee on Wiring Products and the Strategic SteeringCommittee on Requirements for Electrical Safety.Interpretations: The Strategic Steering Committee on Requirements for Electrical Safety has provided thefollowing direct

34、ion for the interpretation of standards under its jurisdiction:“Theliteral text shall be usedin judging compliance of products with the safety requirements of this Standard. When the literal textcannot be applied to the product, such as for new materials or construction, and when a relevantcommittee

35、 interpretation has not already been published, CSAs procedures for interpretation shall befollowed to determine the intended safety principle.”Notes:1) Use of the singular does not exclude the plural (and vice versa) when the sense allows.2) Although the intended primary application of this Standar

36、d is stated in its Scope, it is important to note that itremains the responsibility of the users of the Standard to judge its suitability for their particular purpose.3) This Standard was developed by consensus, which is defined by CSA Policy governing standardization Codeof good practice for standa

37、rdization as “substantial agreement. Consensus implies much more than a simplemajority, but not necessarily unanimity”. It is consistent with this definition that a member may be included inthe Technical Committee list and yet not be in full agreement with all clauses of this Standard.4) To submit a

38、 request for interpretation of this Standard, please send the following information toinquiriescsagroup.org and include “Request for interpretation” in the subject line:a) define the problem, making reference to the specific clause, and, where appropriate, include anillustrative sketch;b) provide an

39、 explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address theissue.Committee interpretations are processed in accordance with the CSA Directives and guidelines governingstandardizatio

40、n and are available on the Current Standards Activities page at standardsactivities.csa.ca.5) This Standard is subject to review five years from the date of publication, and suggestions for its improvementwill be referred to the appropriate committee. To submit a proposal for change, please send the

41、 followinginformation to inquiriescsagroup.org and include “Proposal for change” in the subject line:a) Standard designation (number);C22.2 No. 208-14Fire alarm and signal cableJuly 2014 2014 CSA Group 9b) relevant clause,table, and/or figure number;c) wording of the proposed change; andd) rationale

42、 for the change.C22.2 No. 208-14Fire alarm and signal cableJuly 2014 2014 CSA Group 10C22.2 No. 208-14Fire alarm and signal cable1 Scope1.1This Standard applies to single- and multiple-conductor fire alarm and signal cables with a maximumnominal voltage rating of 300 V and a minimum temperature rati

43、ng of 60 C for use in buildings andother structures in dry or damp locations in accordance with the Rules of Sections 16 and 32 of theCanadian Electrical Code, Part I.1.2Because other CSA Group Standards specify requirements for certain constructions suitable for use as firealarm and signal cable, t

44、his Standard does not cover all such constructions.1.3The designations for constructions covered by this Standard use the letters FAS followed, forconstructions rated above 60 C, by the temperature rating. The type designations are as follows:a) FAS;b) FAS 90;c) FAS 105;d) FAS 150; ande) FAS 200.1.4

45、In this Standard,“shall” is used to express a requirement, i.e., a provision that the user is obliged tosatisfy in order to comply with the standard; “should” is used to express a recommendation or thatwhich is advised but not required; and “may” is used to express an option or that which is permiss

46、iblewithin the limits of the standard.Notes accompanying clauses do not include requirements or alternative requirements; the purpose of anote accompanying a clause is to separate from the text explanatory or informative material.Notes to tables and figures are considered part of the table or figure

47、 and may be written asrequirements.Annexes are designated normative (mandatory) or informative (nonmandatory)to define theirapplication.C22.2 No. 208-14Fire alarm and signal cableJuly 2014 2014 CSA Group 112 Reference publicationsThis Standard refers to the following publications, and where such ref

48、erence is made, it shall be to theedition listed below, including all amendments published thereto.CSA GroupC22.1-12Canadian Electrical Code, Part ICAN/CSA-C22.2 No. 0-10General Requirements Canadian Electrical Code, Part IIC22.2 No. 0.3-09Test methods for electrical wires and cablesC22.2 No. 123-08

49、 (R2012)Aluminum sheathed cablesC22.2 No. 2556-13Wires and cable test methodsASTM International (American Society for Testing and Materials)B3-13Standard Specification for Soft or Annealed Copper WireB8-11Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard,or SoftB33-10Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical PurposesB174-10Standard Specification for Bunch-StrandedCopper Conductors for Electrical ConductorsB286-07(2012)Standard Specification for Copper Conductors for Use i