CEN TS 14999-2013 Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container《热塑管道系统粘合剂 贮存容器加速老化测试》.pdf

《CEN TS 14999-2013 Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container《热塑管道系统粘合剂 贮存容器加速老化测试》.pdf》由会员分享，可在线阅读，更多相关《CEN TS 14999-2013 Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container《热塑管道系统粘合剂 贮存容器加速老化测试》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationPD CEN/TS 14999:2013Adhesives for thermoplasticpiping systems Acceleratedageing test in storagecontainerPD CEN/TS 14999:2013 PUBLISHED DOCUMENTNational forewordThis Published Doc

2、ument is the UK implementation ofCEN/TS 14999:2013.The UK participation in its preparation was entrusted to Technical Committee PRI/52, Adhesives.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the nec

3、essary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013ISBN 978 0 580 76463 9 ICS 83.180 Compliance with a British Standard cannot confer immunity from legal obligations.This Published Documen

4、t was published under the authority of the Standards Policy and Strategy Committee on 30 June 2013.Amendments issued since publicationDate T e x t a f f e c t e dPD CEN/TS 14999:2013TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 14999 May 2013 ICS 83.180 Supersedes CE

5、N/TS 14999:2006English Version Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container Adhsifs pour canalisations thermoplastiques - Adhsifs pour canalisations thermoplastiques - Test de vieillissement acclr des adhsifs Klebstoffe fr thermoplastische Rohrleitungssys

6、teme - Prfung von Klebstoffen bei knstlicher Alterung im Lagerbehlter This Technical Specification (CEN/TS) was approved by CEN on 4 March 2013 for provisional application. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested

7、 to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It

8、is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark

9、, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FO

10、R STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TS 14999:2013: EPD CEN/TS 14999:2013CEN/TS 1

11、4999:2013 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Principe .4 5 Apparatus .4 6 Sampling .5 7 Procedure .5 8 Test Report .5 PD CEN/TS 14999:2013CEN/TS 14999:2013 (E) 3 Foreword This document (CEN/TS 14999:2013) has been prepared by Technical Comm

12、ittee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document

13、 supersedes CEN/TS 14999:2006. CEN/TS 14999:2013 includes the following significant technical changes with respect to CEN/TS 14999:2006: Inclusion of environmental and safety statements on the foreword; Modification of title to be in line with the scope; New explanatory note added to the scope; Defi

14、nition of the RH on standard conditions; Minor changes on the procedure. SAFETY PRECAUTIONS Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is

15、the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. ENVIRONMENTAL PRECAUTIONS It is understood that some of the material permitted in this standard may have negative environmental impact. As technological advant

16、ages lead to acceptable alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard should take care to carry out an appropriate disposal of the wastes, according to local regulations. According to the CEN-CENE

17、LEC Internal Regulations, the national standards organisations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungar

18、y, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. PD CEN/TS 14999:2013CEN/TS 14999:2013 (E) 4 1 Scope This Technical Specification describes a method for an

19、accelerated ageing test of an adhesive in its container. The result provides the manufacturer with an indication of the storage stability of the adhesive and container combination and their ability to retain adhesive properties. The method described is intended for solvent based adhesives for thermo

20、plastic piping systems but may be applied to other adhesive types if appropriate. The method described in this Technical Specification does not give a correlation between the results obtained after the accelerated ageing test and after the shelf life of the adhesive at the ambient conditions defined

21、 by the manufacturer in the data sheet. NOTE Some of the solvents used in adhesives applied for bonding pipe joints are highly flammable and may even cause explosion when heated (tetrahydrofurane). Therefore, the users of this standard need to take special precautions when testing such adhesives acc

22、ording to the provisions of this standard which require prolonged heating of the container with the adhesive. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edi

23、tion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 923:2005+A1:2008, Adhesives Terms and definitions EN 12092, Adhesives Determination of viscosity EN 14680, Adhesives for non-pressure thermoplastic piping systems Specific

24、ations EN 14814, Adhesives for thermoplastic piping systems for fluids under pressure Specifications EN ISO 9311-1, Adhesives for thermoplastic piping systems Part 1: Determination of film properties (ISO 9311-1) EN ISO 9311-2, Adhesives for thermoplastic piping systems Part 2: Determination of shea

25、r strength (ISO 9311-2) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 923:2005+A1:2008 apply. 4 Principe The sample is subjected to a combination of temperature and time under specified conditions, followed by comparison of the viscosity and the she

26、ar strength of the adhesive bond made with the aged sample with those of a reference sample that has been maintained under standard reference conditions; i.e. (23 2) C. 5 Apparatus 5.1 Oven, able to maintain a temperature of (50 2) C or (40 2) C. PD CEN/TS 14999:2013CEN/TS 14999:2013 (E) 5 5.2 Clima

27、tic chamber, able to maintain the conditions to (23 2) C. 6 Sampling Take a minimum of six identical unopened containers of each adhesive, three to be exposed to the ageing conditions and three as reference sample. Typical examples of containers commonly used for adhesives for thermoplastic piping s

28、ystems, though not exhaustive, are: a) tin plated can + tin plated cap; b) tin plated can + plastic cap; c) aluminium plated can + plastic cap; d) brown glass bottle + plastic cap; e) plastic container + plastic cap. 7 Procedure Put the three samples of the adhesive in an oven (5.1) for 28 days at (

29、50 2) C. Depending on the character of the adhesive, lower temperatures may be used, e.g. (40 2) C for three months. At the end of the test period, condition the aged samples for 24 h at (23 2) C in the climatic chamber (5.2). Put the reference sample in a climatic chamber at (23 2) C for 24 h. Dete

30、rmine the viscosity in accordance with EN 12092, film properties in accordance with EN ISO 9311-1 and the shear strength at 24 h setting time in accordance with EN ISO 9311-2 for all the samples (aged and reference samples). Calculate the average value of the viscosity, film properties and shear str

31、ength of the adhesive bonds made with all the samples. The average value of the viscosity, film properties and the shear strength of the adhesive bonds made with the aged samples compared to those of the reference samples gives an indication of the storage stability of the adhesive and container com

32、bination and their ability to retain adhesive properties. The average value for viscosity and film properties for the aged samples shall conform to the manufacturers specifications for application properties. The average value for the shear strength at 24 h for the adhesive bonds made with the aged

33、samples shall meet the requirements in the system standards (EN 14680 or EN 14814, depending on the type of adhesive). NOTE Following the weight loss and viscosity on the aged samples can help in understanding the behaviour of each adhesive and container couple. 8 Test Report The test report shall i

34、nclude, at least, the following information: a) a reference to this Technical Specification (i.e. CEN/TS 14999:2013); PD CEN/TS 14999:2013CEN/TS 14999:2013 (E) 6 b) type and identification (batch number, date of manufacturing or other code) of the adhesive tested; c) description of the packaging tes

35、ted; d) the average viscosity value of the three aged samples and that of the three reference samples; e) the average film properties value for the aged samples and the reference samples; f) the shear strength obtained for the adhesive bonds made with the aged samples and the reference samples; g) a

36、ny modification of the procedures described, and any incident which may have affected the results; h) observations of the visual appearance of the containers and the adhesive after aging; i) date of the test. This page deliberately left blankBSI is the independent national body responsible for prepa

37、ring British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limited.

38、British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest a

39、mendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be fou

40、nd on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Stand

41、ards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI

42、 Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI provides a wide range of in

43、formation on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase priceof standards. For details of

44、these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards and PASs via British Standards Online can be found at information about British Standards is available on the BSI website at

45、 www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the international standardisation bodies) has formally licensed such inf

46、ormation to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permi

47、ssion from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department.Tel: +44 (0)20 8996 7070Email: