CEN TR 17004-2016 Mechanical products - Conditions to set up environmental communication models by recognizing sectorial particularities.pdf

《CEN TR 17004-2016 Mechanical products - Conditions to set up environmental communication models by recognizing sectorial particularities.pdf》由会员分享，可在线阅读，更多相关《CEN TR 17004-2016 Mechanical products - Conditions to set up environmental communication models by recognizing sectorial particularities.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、Mechanical products Conditions to set up environmental communicationmodels by recognizing sectorialparticularitiesPD CEN/TR 17004:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis Published Document is the UK implementation of CEN/TR 17004:201

2、6.The UK participation in its preparation was entrusted by TechnicalCommittee TDW/4, Technical Product Realization, to SubcommitteeTDW/4/7, Technical Product Realization - BS 8887 Design for MADE.A list of organizations represented on this committee can be obtained onrequest to its secretary.This pu

3、blication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 93791 0ICS 13.020.10Compliance with a British Standard cannot confer immuni

4、ty fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 30 November 2016.Amendments/corrigenda issued since publicationDate Text affectedPUBLISHED DOCUMENTPD CEN/TR 17004:2016TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BE

5、RICHT CEN/TR 17004 October 2016 ICS 13.020.10 English Version Mechanical products - Conditions to set up environmental communication models by recognizing sectorial particularities Produits mcaniques - Lignes directrices pour la slection de modles de communication environnementaux par la reconnaissa

6、nce des particularits sectorielles Mechanische Produkte - Leitfaden fr die Auswahl von Modellen der Umweltkommunikation This Technical Report was approved by CEN on 19 August 2016. It has been drawn up by the Technical Committee CEN/TC 406. CEN members are the national standards bodies of Austria, B

7、elgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swi

8、tzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nation

9、al Members. Ref. No. CEN/TR 17004:2016 EPD CEN/TR 17004:2016CEN/TR 17004:2016 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Principal considerations before applying a type of communication . 6 5 Choice of a type of communica

10、tion according to categories of mechanical products 7 5.1 General 7 5.2 Characteristics to identify the principal category of a mechanical product 7 5.2.1 What are the economic issues/acquisition costs? . 7 5.2.2 What is the place of use? . 7 5.2.3 What are the intended application and the customer

11、maturity? 7 5.2.4 What is the intended workload? 7 5.2.5 What is the intended lifespan? . 7 5.2.6 What is the number of units to be produced? . 7 5.2.7 What is the level of complexity of the mechanical product? . 7 5.2.8 Does the operator need special knowledge to use the mechanical product? . 8 5.3

12、 Classification obtained 8 5.4 Type of communication 8 5.5 Choice of communication type 11 6 Communication . 12 6.1 Type II self-declared claim according to EN ISO 14021 12 6.2 Type I declaration according to EN ISO 14024 13 6.3 Type III declaration according to EN ISO 14025 . 13 Annex A (informativ

13、e) Already existing initiatives in the mechanical sector . 14 Bibliography . 16 PD CEN/TR 17004:2016CEN/TR 17004:2016 (E) 3 European foreword This document (CEN/TR 17004:2016) has been prepared by Technical Committee CEN/TC 406 “Mechanical products - Ecodesign methodology”, the secretariat of which

14、is held by AFNOR. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. PD CEN/TR 17004:2016CEN/TR 17004:2016 (E) 4 Introduction The European mechanical se

15、ctor can find opportunities in producing rules for environmental product declaration from such perspectives as business opportunities, financial perspectives, sectorial consistency and public image. It allows companies in the mechanical field to address current and anticipate future demands coming f

16、rom clients or markets on the environmental efficiency of their products. In addition, they have sometimes to meet requirements of regulations in force or to come, and to measure products improvements in an eco-innovation project to enhance the attractiveness of the products. Any communication on en

17、vironmental criteria will have to be decided for each category of products by the corresponding Technical Committee. Declaration of environmental performance of products can present several advantages: to promote existing eco-innovation efforts to clients and market; to create the market for green m

18、echanical products; to ensure a fair competition on the market. This document is aimed at: optimizing rules to reduce the cost of environmental communication; sharing the efforts needed to develop declaration rules; reducing the costs for information exchange within the supply chain. As most of comp

19、anies in the mechanical field sell products across Europe and around the world, it is impossible to evaluate and communicate environmental characteristics, taking into account all specific local rules and methodologies. That is why companies expect simple, pragmatic and unified rules. PD CEN/TR 1700

20、4:2016CEN/TR 17004:2016 (E) 5 1 Scope This Technical Report provides guidance on how to apply existing communication models regarding environmental concerns to mechanical products. Carrying out communication models for environmental performances of mechanical products can be relevant for several ent

21、ities, e.g. single companies, enterprises, collective bodies (trade associations, standardization committees, etc.) and others. On the one hand side, mechanical products represent a large variety of non-uniform items. They can be characterized by several properties distinguishing them from each othe

22、r. On the other hand side, various generic standards/standard-series are existent addressing on how to communicate environmental issues. This Technical Report provides a consistent approach on how to match a particular mechanical product with an appropriate generic standard. In order to do so, this

23、Technical Report contains criteria to cluster the great variety of mechanical products into categories. Based on this categorization, existing standards concerning environmental performance communication are evaluated with regards to their suitability. 2 Normative references The following documents,

24、 in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 14050, Environmental man

25、agement - Vocabulary (ISO 14050) 3 Terms and definitions For the purposes of this document, the terms and definitions from EN ISO 14050 and the following apply 3.1 mechanical product product manufactured by enterprises from mechanical engineering and metalworking industry, such as capital goods (mac

26、hinery, production systems, components), tools, household goods, optical parts, measuring instruments SOURCE: CEN/TS 16524:2013, 2.1 3.2 consumer goods goods that satisfy personal needs rather than those required for the production of other goods or services 3.3 capital goods goods that are themselv

27、es utilized in the production of other goods rather than being sold to consumers PD CEN/TR 17004:2016CEN/TR 17004:2016 (E) 6 4 Principal considerations before applying a type of communication The following should be considered before initiating reflexions on environmental communication (see Figure 1

28、): first check whether regulation at European or at national levels applies concerning environmental issues for the concerned product; if this situation applies, the declaration requested by this regulation shall be applied; if not, secondly search for standards covering the concerned product, if su

29、ch standards exist, it is recommended to follow the communication proposed; if not, thirdly search for sectorial initiatives covering the concerned product (e.g initiatives from manufacturers associations): if such initiatives exist, it is recommended to follow the communication proposed; if this is

30、 not the case, it is recommended to use the following guidelines (see Clauses 4 and 5): after having identified the category of the mechanical product, a suitable type of communication is obtained (Clause 4) and Clause 5 provides the proper tools for communication. Figure 1 Principal considerations

31、before applying a type of communication PD CEN/TR 17004:2016CEN/TR 17004:2016 (E) 7 5 Choice of a type of communication according to categories of mechanical products 5.1 General The definition of a mechanical product in 3.1 is very generic to cover a wide range of different mechanical products or p

32、roduct groups. A classification can help to provide better insights. Mechanical products can be divided in two principal categories: either consumer goods or capital goods taking into account the answers to the questions provided in 5.2. NOTE In general, capital goods are often custom-made and tailo

33、red to the clients needs, being a long-term investment for the industrial clients and having typically a long lifetime. On the other side, consumer goods are mainly stand-alone, purpose made, mass produced goods in terms of their complexity, application range and intended use, functionality and cust

34、omer base. It does not mean that a capital good is not produced in series (e.g. catalogue products) for use by industrial clients. 5.2 Characteristics to identify the principal category of a mechanical product 5.2.1 What are the economic issues/acquisition costs? Acquisition costs of mechanical prod

35、ucts can vary from few euros for some consumer goods to several million euros for some capital goods such as production systems. 5.2.2 What is the place of use? Capital goods are mainly used in factories, plants, businesses or in general by professionals while consumer goods are used by consumers at

36、 their private premises. 5.2.3 What are the intended application and the customer maturity? Capital goods are intended to produce other parts and components (not ready-for-use products) which are further processed in a business value chain or in final products intended for sale to costumers. The use

37、 of capital goods requires special knowledge and/or training. Consumer goods are ready-for-use products which are intended to provide an immediate service (Business to Consumer (B2C). The use of consumer goods does not require special knowledge and/or training. 5.2.4 What is the intended workload? W

38、hile capital goods, e.g. production systems are intended to be operated with high load factor, often 24/7, consumer goods are not intended to be used so intensively. 5.2.5 What is the intended lifespan? In general capital goods are built to be in operation for many years whereas consumer goods are m

39、ore often designed for a lifespans of few years. 5.2.6 What is the number of units to be produced? Capital goods are produced in small numbers or are often custom made. Consumer goods are produced in large batch sizes. 5.2.7 What is the level of complexity of the mechanical product? Consumer goods a

40、re often composed of few parts compared to capital goods which may be an assembly of a large variety of different components being themselves complex systems. PD CEN/TR 17004:2016CEN/TR 17004:2016 (E) 8 5.2.8 Does the operator need special knowledge to use the mechanical product? Consumer goods are

41、designed to be operated by everyone. Whereas, the operation of capital goods requires special training and know how. 5.3 Classification obtained Answering the questions listed in 5.2 allows classifying products/product groups as capital good or as consumer good. When answering the questions for a ce

42、rtain product group leads to the result that all separate product covered by this group can be assigned to the same category, no further investigation is necessary. In some cases, a product group covers products that may have characteristics of both consumer and capital goods. In these cases, the qu

43、estions listed in 5.2 shall be answered for each product and a decision shall be taken case by case. NOTE For instance, the product group “cranes” fulfils all characteristics of capital goods whether the specific product is a mobile crane, a tower crane or a gentry crane. Obviously a simple measurin

44、g tape is a consumer good whereas a theodolite fulfils all the criteria of a capital good, nevertheless both products belong to the product group “measuring instruments” (see Figure 2). a) Measuring tape b) Theodolite Figure 2 Measuring instruments 5.4 Type of communication Table 1 presents the diff

45、erent types of communication. PD CEN/TR 17004:2016CEN/TR 17004:2016 (E) 9 Table 1 Different types of communication Type I Communication according to EN ISO 14024 Type II Communication according to EN ISO 14021 Type III Communication according to EN ISO 14025 Ecolabel Self-declared claims Environment

46、al Product Declaration (EPD) Based on a certification scheme Third party verification Based on a voluntary approach (e.g. CEN/TS 16524) Self declaration Based on Life Cycle Assessment (LCA as described in EN ISO 14040) Usually, third party verification Principles To help consumers to identify enviro

47、nmentally improved products by using a very simple labelling system guaranteeing the customer a certain level of environmental performance. To encourage self-improvement with a periodical revision of the Eco-label rules. The Eco-label option is more suitable for mass-market products. However, eco-la

48、bels appear for mechanical products. To develop and highlight an effort in eco-innovation / eco-design. To communicate simply and easily to understand information about the environmental performance of products. To provide clear and accessible information for the client by linking environmental and

49、technical characteristics of the product. To allow an easy application by the designers involved with environmental issues. To propose very detailed information on the environmental performance of products (multicriteria and whole life cycle) in terms of environmental impacts (biodiversity, resource depletion, climate change, etc.). It is based on environmental indicators and additional information, like for example dangerous substances or environmental management systems in the organization. It is possible that customers are not mature e