CEN TR 14245-2014 Cement - Guidelines for the application of EN 197-2 Conformity Evaluation《水泥 指导方针EN 197-2符合性评价中的应用》.pdf

《CEN TR 14245-2014 Cement - Guidelines for the application of EN 197-2 Conformity Evaluation《水泥 指导方针EN 197-2符合性评价中的应用》.pdf》由会员分享，可在线阅读，更多相关《CEN TR 14245-2014 Cement - Guidelines for the application of EN 197-2 Conformity Evaluation《水泥 指导方针EN 197-2符合性评价中的应用》.pdf（52页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPD CEN/TR 14245:2014Cement Guidelines forthe application of EN 197-2Conformity EvaluationPD CEN/TR 14245:2014 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN/TR14245:2014. It supersedes PD CR 14245:2001 which is withdrawn.The UK par

2、ticipation in its preparation was entrusted to TechnicalCommittee B/516/12, Sampling and testing.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsi

3、ble for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 85282 4ICS 03.120.20; 91.100.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of the

4、Standards Policy and Strategy Committee on 30 September 2014.Amendments issued since publicationDate Text affectedPD CEN/TR 14245:2014TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 14245 September 2014 ICS 91.100.10 Supersedes CR 14245:2001English Version Cement - Guidelines for the a

5、pplication of EN 197-2 Conformity Evaluation Ciment - Lignes directrices pour lapplication de lEN 197-2 -Evaluation de la conformit Zement - Richtlinien fr die Anwendung von EN 197-2 Konformittsbewertung This Technical Report was approved by CEN on 18 August 2014. It has been drawn up by the Technic

6、al Committee CEN/TC 51. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Net

7、herlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All r

8、ights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 14245:2014 EPD CEN/TR 14245:2014CEN/TR 14245:2014 (E) 2 Contents Page Foreword 4 Introduction to this Guidelines Document .5 1 Scope 7 2 Normative references 7 3 Terms and definitions .8 4

9、 Factory production control by the manufacturer 11 4.1 General requirements . 11 4.1.1 Concept 11 4.1.2 Works quality manual 11 4.1.3 Management systems 13 4.1.4 System of documentation 14 4.2 Internal quality control . 15 4.2.1 Process control . 15 4.2.2 Measuring and testing 17 4.2.3 Handling, sto

10、rage, packaging and delivery . 18 4.3 Autocontrol testing of samples . 18 4.3.1 Sampling and testing . 18 4.3.2 Corrective action. 19 4.3.3 Measuring and test equipment for autocontrol testing 20 4.3.4 Quality records 21 5 Tasks for the product certification body 21 5.1 General . 21 5.2 Continuous s

11、urveillance, assessment and evaluation of the factory production control 21 5.2.1 Inspection tasks 21 5.2.2 Frequency of inspections 22 5.2.3 Reports 22 5.3 Evaluation of the results of autocontrol testing of samples 23 5.3.1 Evaluation tasks 23 5.3.2 Number and timing of evaluations 23 5.3.3 Contro

12、l period . 23 5.3.4 Evaluation of test results . 24 5.3.5 Reports 27 5.4 Audit testing of samples taken at the factory/depot and determination of the product-type by testing . 27 5.4.1 Sampling 27 5.4.2 Number of samples. 27 5.4.3 Properties and test methods . 28 5.4.4 Testing . 28 5.4.5 Evaluation

13、of test results . 28 5.4.6 Reports 29 5.4.7 Proficiency testing 29 5.5 Initial inspection of the factory and the factory production control . 30 5.5.1 Inspection of a new factory . 30 5.5.2 Inspection of an existing factory . 31 5.5.3 Criteria for the assessment of the production equipment . 31 5.5.

14、4 Criteria for the assessment of laboratories . 31 5.5.5 Reports 32 5.6 Evaluation of test results during the initial period 32 PD CEN/TR 14245:2014CEN/TR 14245:2014 (E) 3 5.6.1 Initial period . 32 5.6.2 Evaluation of test results 32 5.6.3 Reports . 32 6 Actions in the event of non-conformity 33 6.1

15、 Actions to be taken by the manufacturer 33 6.2 Actions to be taken by the product certification body 33 6.2.1 Following continuous surveillance, assessment and evaluation of the factory production control (see 5.2) and evaluation of the results of autocontrol testing (see 5.3) . 33 6.2.2 Following

16、evaluation of the results of the audit testing of samples taken at the factory/depot (see 5.4 and Annex A) . 34 7 Procedure for third party certification of constancy of performance of the product 35 8 Certificate of constancy of performance of the product and conformity mark 36 8.1 Indication of co

17、nstancy of performance of the product 36 8.2 Certificate of constancy of performance of the product . 36 9 Requirements for dispatching centres 38 9.1 General requirements . 38 9.2 Tasks for the intermediary 38 9.2.1 Measures to maintain the cement quality . 38 9.2.2 Confirmation autocontrol testing

18、 of samples taken at the dispatching centre 39 9.3 Tasks for the third party . 39 9.3.1 Continuous surveillance, assessment and evaluation of the measures to maintain the cement quality and of the confirmation autocontrol . 39 9.3.2 Audit testing of samples taken at the dispatching centre 39 9.3.3 D

19、ecisions to be taken 39 Annex A (normative) Evaluation of the representativeness and the accuracy of the 28 day strength test results 42 A.1 General . 42 A.2 Sets of results considered 42 A.3 Evaluation procedure 42 A.3.1 Introduction 42 A.3.2 Symbols 42 A.3.3 Evaluation of whether set A and set B b

20、elong to the same population (sampling error check) . 43 A.3.4 Comparison between set B and set C in order to check the accuracy of the autocontrol testing (testing error check) . 44 A.3.5 Masonry cement 44 A.3.6 Calcium aluminate cement . 44 Annex B (informative) Procedure for certification of cons

21、tancy of performance of cement 45 Annex C (informative) Comparison of terminology according to the CPD and the CPR. 46 PD CEN/TR 14245:2014CEN/TR 14245:2014 (E) 4 Foreword This document (CEN/TR 14245:2014) has been prepared by Technical Committee CEN/TC 51 “Cement and building limes”, the secretaria

22、t of which is held by NBN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes CR 14245:2001. Compared with CR 14

23、245:2001, the following changes have been made: Guidelines harmonized with EN 197-2:2014 and standard text of EN 197-2:2014 included. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Report: Austri

24、a, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,

25、 Switzerland, Turkey and the United Kingdom. PD CEN/TR 14245:2014CEN/TR 14245:2014 (E) 5 Introduction to this Guidelines Document Purpose The purpose of this Guidelines Document is to provide explanatory detail on points not fully elaborated in EN 197-2. It is intended for use by manufacturers and b

26、y product certification bodies involved in the certification of cement following EN 197-2, in particular for the issuing of an EC certificate of constancy of performance. This document does not deal with the necessary internal procedures that the product certification bodies will have. It is an obje

27、ctive of this Guidelines Document that its use will assist in the establishment of equivalent procedures for certification of cement. It is expected that, following this document, traditional good procedures and practices that may be different can continue to be used, provided that they are not in c

28、ontradiction with EN 197-2 and the relevant product specification standard. Such existing good procedures and practices, applied in conjunction with these Guidelines, are not considered to be an impediment to the achievement of the uniform level of certification throughout Europe, and by different p

29、roduct certification bodies, that is expected from the application of EN 197-2 together with these Guidelines. This Guidelines Document is based on existing situations for production, evaluation of conformity and certification of cements. It may happen that product certification bodies be confronted

30、 by a situation different to those included in this document. In such a case, specific procedures should be elaborated on a case by case situation and be approved and fully recorded by the product certification body. These specific procedures should always fulfil the requirements of EN 197-1 and EN

31、197-2 and lead to the same level of confidence in product conformity that would be achieved by application of this Guidelines Document. Arrangement The clause numbering system of EN 197-2 is followed. The text of each of the clauses of the European Standard is reproduced in full and is followed by g

32、uidance, which is provided only for those clauses where clarification or elaboration is needed. Clauses of EN 197-2 Foreword 1 Scope 2 Normative references 3 Terms and definitions 4 Factory production control by the manufacturer 5 Tasks for the product certification body 6 Actions in the event of no

33、n-conformity 7 Procedure for third party certification of constancy of performance of the product 8 Certificate of constancy of performance of the product and conformity mark 9 Requirements for dispatching centres Tables 1 and 2 Annexes A, B, and C. PD CEN/TR 14245:2014CEN/TR 14245:2014 (E) 6 Forewo

34、rd This document (EN 197-2:2014) has been prepared by Technical Committee CEN/TC 51 “Cement and building limes”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the late

35、st by July 2014, and conflicting national standards shall be withdrawn at the latest by July 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such pa

36、tent rights. This document supersedes EN 197-2:2000. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. Compared to the version EN 197-2:2000, the following major changes have been made in this document: use of the termino

37、logy given by the Construction Products Regulation (Regulation (EU) No 305/2011) and comparison with the earlier terminology according to the Construction Products Directive (Directive 89/106/EEC) (Annex C); link between this European Standard and Annexes ZA of European Standards covering cements; g

38、uidance concerning the uncertainty of measurements in the evaluation of test results; numerical criteria for the evaluation procedure for calcium aluminate cement conforming to EN 14647, (Annex A); figure describing the procedure for certification of constancy of performance of cement in a new facto

39、ry or of a new type of cement in an existing factory (Annex B). According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Esto

40、nia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. PD CEN/TR 14245:2014CEN

41、/TR 14245:2014 (E) 7 1 Scope This European Standard specifies the scheme for the assessment and verification of constancy of performance (AVCP) of cements to their corresponding product specification standards, including certification of constancy of performance by a product certification body. The

42、standard provides technical rules for factory production control by the manufacturer, including autocontrol testing of samples, and for the tasks of the product certification body. It also provides rules for actions to be followed in the event of non-conformity, the procedure for the AVCP and requir

43、ements for dispatching centres. In this European Standard, the word “cement” is used to refer both to common cements as defined in EN 197-1 and to other cements and binders for which the relevant product specification standard makes reference to this European Standard and which are submitted for cer

44、tification. Such a cement is produced at a given factory and belongs to a particular type and a particular strength class, as defined and specified in the relevant product specification standard. The guidelines given in the Technical Report CEN/TR 14245 11)should be used for the application of this

45、European Standard. This European Standard should be linked with Annexes ZA of European Standards covering cements and binders, i.e. EN 197-1, EN 14216, EN 14647, EN 413-1, EN 15743, in particular for the assignments of tasks to the manufacturer and to the product certification body. NOTE The reason

46、for having drafted this separate document is that the provisions it includes are applicable to different products covered by different European Standards. Guidance EN 197-2 deals with the evaluation of conformity of cements and binders that are submitted for certification. It deals in particular wit

47、h cases where “further testing” of the product is undertaken, as is the case for attestation system 1+ under the Construction Products Regulation. The products for which EN 197-2 is applicable are: the common cement products and the low heat cements and the sulfate resisting cements, refer to EN 197

48、-1, the very low heat special cements, refer to EN 14216, the supersulfated cements, refer to EN 15743, the calcium aluminate cements, refer to EN 14647, and the masonry cements, refer to EN 413-1. 2 Normative references The following documents, in whole or in part, are normatively referenced in thi

49、s document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 196-7, Methods of testing cement - Part 7: Methods of taking and preparing samples of cement EN 413-1, Masonry cement - Part 1: Composition, specifications and conformity criteria EN 14647, Calcium aluminate cement - Composition, specifications and conformity criteria ISO 2854, Statistical interpretation of data Techniques of estimation and tests