CAN CSA-ISO 19901-2010 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6 Marine operations (First Edition Technical Corrigendum 1 Februa.pdf

《CAN CSA-ISO 19901-2010 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6 Marine operations (First Edition Technical Corrigendum 1 Februa.pdf》由会员分享，可在线阅读，更多相关《CAN CSA-ISO 19901-2010 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6 Marine operations (First Edition Technical Corrigendum 1 Februa.pdf（194页珍藏版）》请在麦多课文档分享上搜索。

1、Petroleum and natural gas industries Specific requirements for offshore structures Part 6: Marine operationsCAN/CSA-ISO 19901-6-10(ISO 19901-6:2009, IDT)National Standard of CanadaNOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE.Legal Notice for StandardsCanadian Standards Association (CSA) standar

2、ds are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules

3、 to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitati

4、on, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in t

5、his document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT,

6、INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGEN

7、CE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to rende

8、r professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accept

9、s no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with t

10、he contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyr

11、ight, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modificati

12、on, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves al

13、l intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly adv

14、ised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this documen

15、t is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to ha

16、ve such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this

17、 document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acce

18、ptance of the terms and conditions of this Legal Notice.Petroleum and natural gas industries Specific requirements for offshore structures Part 6: Marine operationsTechnical Corrigendum 1:2012 (IDT) toNational Standard of CanadaCAN/CSA-ISO 19901-6-10(ISO 19901-6:2009, IDT)NOT FOR RESALE.PUBLICATION

19、NON DESTINE LA REVENTE.CSA Standards Update ServiceTechnical Corrigendum 1:2012 toCAN/CSA-ISO 19901-6-10February 2012Title: Petroleum and natural gas industries Specific requirements for offshore structures Part 6: Marine operationsPagination: 1 pageTo register for e-mail notification about any upda

20、tes to this publication go on-line to shop.csa.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2420808.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit C

21、SAs policy on privacy at csagroup.org/legal to find out how we protect your personal information.INTERNATIONAL STANDARD ISO 19901-6:2009TECHNICAL CORRIGENDUM 1 Published 2011-12-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATIONPetroleum and natural gas in

22、dustries Specific requirements for offshore structures Part 6: Marine operations TECHNICAL CORRIGENDUM 1 Industries du ptrole et du gaz naturel Exigences spcifiques relatives aux structures en mer Partie 6: Oprations marines RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO 19901-6:2009 was pr

23、epared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries, Subcommittee SC 7, Offshore structures. Page 119, 18.3.5.2 Replace existing Equation (15) with the following Equation (15): Wsrlw,i Fsrhl,i kDAF Wrw,i(15) wh

24、ere Fsrhl,iis the nominal hook load, Fhl, from Equation (11), statistically resolved between crane hooks 1 and 2; Wrw,iis the rigging weight associated with crane hook i; kDAFis the dynamic amplification factor from 18.3.3, including the multiplier from 18.3.3.3 where applicable. ICS 75.180.10 Ref.

25、No. ISO 19901-6:2009/Cor.1:2011(E) ISO 2011 All rights reserved Technical Corrigendum 1:2012 to CAN/CSA-ISO 19901-6-10Copyright NoticeThis Amendment to the International Standard contains information copyright protected by the International Organization for Standardization (ISO). Except as permitted

26、 under the laws of Canada, no extract of this Amendment to the International Standard may be reproduced, stored in any retrieval system, or transmitted in any form or by any means, electronic, photocopying, recording, or otherwise, without prior permission from the Standards Council of Canada (SCC).

27、 Requests for permission to reproduce this Amendment to the International Standard or parts thereof should be addressed to Manager, Technical Document Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7 The Canadian adoption of this Amendment to the International

28、Standard contains information copyright protected by the Canadian Standards Association. All rights reserved. No part of this adopted Amendment may be reproduced in any form whatsoever without the prior permission of the publisher. ISO material is reprinted with permission. Requests for permission t

29、o reproduce this adopted Amendment or parts thereof should be addressed to Manager, Sales Canadian Standards Association 5060 Spectrum Way, Suite 100 Mississauga, Ontario L4W 5N6Copyright violators will be prosecuted to the full extent of the law. PRINTED IN CANADAIMPRIMEAU CANADA100%The Canadian St

30、andards Association (CSA) prints its publications on Rolland Enviro100, which contains 100% recycled post-consumer fibre, is EcoLogo and Processed Chlorine Free certified, and was manufactured using biogas energy.CSA Standards Update ServiceCAN/CSA-ISO 19901-6-10November 2010Title:Petroleum and natu

31、ral gas industries Specific re quirements for offshore structures Part 6: Marine operationsPagination:178 pages (CSA/1CSA/4, iix, and 165 text)To register for e-mail notification about any updates to this publicationgo to www.ShopCSA.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards

32、Update ServiceThe List ID that you will need to register for updates to this publication is 2420808.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.The Canadian

33、 Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards d

34、evelopment and certification activities. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by muni

35、cipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards development by volunteering their time and s

36、kills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source

37、of income for CSAs standards development activities. The Association offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association regularly and continually audits and inspect

38、s products that bear the CSA Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has developed the necessary expertise to meet its co

39、rporate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.For further inf

40、ormation on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada (SCC) is thecoordinating body of the National StandardsSystem, a coalition of independent, autonomousorganizations working towards the furthe

41、rdevelopment and improvement of voluntarystandardization in the national interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof advancing the national economy, benefiting thehealth, safety, and welfare of the public, assistingand protecting the cons

42、umer, facilitating domesticand international trade, and furthering internationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or reviewed by an accredited Standards Development Organization (SDO) and approved by the SCC according to the requirements

43、of CAN-P-2. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of g

44、eneral interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest.Those who have a need to apply s

45、tandards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO which publishes the standard.The responsibility for approving standards as National Standards of Canada rests with theStandards Council of Canada270

46、 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Sta

47、ndards AssociationCette norme est offerte en anglais seulement pour le moment. La CSA publiera la version enfranais ds quelle sera produite par lorganisme rdacteur.Reviewed byNational Standard of CanadaPublished in November 2010 by Canadian Standards AssociationA not-for-profit private sector organi

48、zation5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caPrepared byInternational Organization for StandardizationApproved byStandards Council of CanadaCAN/CSA-ISO 19901-6-10Petroleum and natural gas industries Specifi

49、c requirements for offshore structures Part 6: Marine operationsCAN/CSA-ISO 19901-6-10Petroleum and natural gas industries Specific requirementsfor offshore structures Part 6: Marine operationsCSA/4 Canadian Standards Association November 2010CAN/CSA-ISO 19901-6-10Petroleum and natural gas industries Specific requirements for offshore structures Part 6: Marine operationsCSA PrefaceThis is the first edition of CAN/CSA-ISO 19901-6, Petroleum and natural gas industries Spec