CAN CSA-ISO 14044-2006 Environmental management - Life cycle assessment - Requirements and guidelines (First Edition).pdf

《CAN CSA-ISO 14044-2006 Environmental management - Life cycle assessment - Requirements and guidelines (First Edition).pdf》由会员分享，可在线阅读，更多相关《CAN CSA-ISO 14044-2006 Environmental management - Life cycle assessment - Requirements and guidelines (First Edition).pdf（64页珍藏版）》请在麦多课文档分享上搜索。

1、 Reference numberISO 14044:2006(E)ISO 2006Environmental management Life cycle assessment Requirements and guidelines Management environnemental Analyse du cycle de vie Exigences et lignes directrices International Organization for Standardization (ISO), 2006. All rights reserved. NOT FOR RESALE. Nat

2、ional Standard of CanadaCAN/CSA-ISO 14044:06(ISO 14044:2006)International Standard ISO 14044:2006 (first edition, 2006-07-01) has been adopted without modification(IDT) as CSA Standard CAN/CSA-ISO 14044:06, which has been approved as a National Standard of Canadaby the Standards Council of Canada.IS

3、BN 1-55436-337-3 December2006LegalNoticeforStandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by theStandards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achie

4、ve consensusand develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representa

5、tions, warranties, or conditions of any kind, express or implied, including, withoutlimitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or itsnon-infringement of any third partys intellectual property rights. CSA does n

6、ot warrant the accuracy, completeness, or currency of anyof the information published in this document. CSA makes no representations or warranties regarding this documents compliance withany applicable statute, rule, or regulation.IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFI

7、LIATED COMPANIES, OR THEIR EMPLOYEES,DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES,HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESSINTERRUPTION, LOST OR DAMAGED DATA, OR ANY O

8、THER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO ORPOSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS,COSTS, OR EXPENSES

9、.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document isdirected to those who have th

10、e appropriate degree of experience to use and apply its contents, and CSA accepts no responsibilitywhatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA is a private not-for-profit company that publishes voluntary standards and related do

11、cuments. CSA has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the au

12、thorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), andall inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protectedby patents and appli

13、cations for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this documentmay violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legalredress for such use, modification, copying, or di

14、sclosure. To the extent permitted by licence or by law, CSA reserves all intellectualproperty rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be heldresponsible for identifying an

15、y or all such patent rights. Users of this standard are expressly advised that determination of the validity ofany such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of

16、this document is authorized to doonly the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document.Limited copies of this document in print or paper form may be distributed only

17、 to persons who are authorized by CSA to have suchcopies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization fr

18、om CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document ormake any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. U

19、se of thisdocument constitutes your acceptance of the terms and conditions of this Legal Notice.TheCanadianStandardsAssociation(CSA),under whose auspices this National Standard hasbeen produced, was chartered in 1919 andaccredited by the Standards Council of Canadato the National Standards system in

20、 1973. It is anot-for-profit, nonstatutory, voluntary membershipassociation engaged in standards development andcertification activities.CSA standards reflect a national consensus ofproducers and users including manufacturers,consumers, retailers, unions and professionalorganizations, and government

21、al agencies. Thestandards are used widely by industry and commerceand often adopted by municipal, provincial, andfederal governments in their regulations, particularlyin the fields of health, safety, building andconstruction, and the environment.Individuals, companies, and associations acrossCanada

22、indicate their support for CSAs standardsdevelopment by volunteering their time and skillsto CSA Committee work and supporting theAssociations objectives through sustainingmemberships. The more than 7000 committeevolunteers and the 2000 sustaining membershipstogether form CSAs total membership from

23、whichits Directors are chosen. Sustaining membershipsrepresent a major source of income for CSAsstandards development activities.The Association offers certification and testingservices in support of and as an extension to itsstandards development activities. To ensure theintegrity of its certificat

24、ion process, the Associationregularly and continually audits and inspects productsthat bear the CSA Mark.In addition to its head office and laboratorycomplex in Toronto, CSA has regional branch officesin major centres across Canada and inspection andtesting agencies in eight countries. Since 1919, t

25、heAssociation has developed the necessary expertise tomeet its corporate mission: CSA is an independentservice organization whose mission is to provide anopen and effective forum for activities facilitating theexchange of goods and services through the use ofstandards, certification and related serv

26、ices to meetnational and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaTheStandardsCouncilofCanada(SCC)is thecoordinating body of the National StandardsSystem, a coalition of independe

27、nt, autonomousorganizations working towards the furtherdevelopment and improvement of voluntarystandardization in the national interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof advancing the national economy, benefiting thehealth, safety, and w

28、elfare of the public, assistingand protecting the consumer, facilitating domesticand international trade, and furthering internationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or reviewed by an accredited StandardsDevelopment Organization (SDO) a

29、nd approvedby the SCC according to the requirements of CAN-P-2.Approval does not refer to the technical content of thestandard; this remains the continuing responsibility ofthe SDO. An NSC reflects a consensus of a number ofcapable individuals whose collective interests provide,to the greatest pract

30、icable extent, a balance ofrepresentation of general interests, producers,regulators, users (including consumers), and otherswith relevant interests, as may be appropriate to thesubject in hand. It normally is a standard which iscapable of making a significant and timely contributionto the national

31、interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO whichpublishes the standard.The responsibility for approving standards asNational Standards of Canada rests

32、 with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibil

33、ity of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationApproved byStandards Council of CanadaNational Standard of CanadaPublished in December 2006 by Canadian Standards AssociationA not-for-profit private sector organization5060

34、Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caCAN/CSA-ISO 14044:06Environmental management Life cycle assessment Requirements and guidelinesRegistered trade-mark of Canadian Standards AssociationReviewed byPrepared byI

35、nternational Organization for StandardizationCAN/CSA-ISO 14044:06Environmental management Life cycleassessment Requirements and guidelinesDecember 2006 Canadian Standards Association CSA/3CAN/CSA-ISO 14044:06Environmental management Life cycle assessment Requirements and guidelinesCSA PrefaceThis is

36、 the first edition of CAN/CSA-ISO 14044, Environmental management Life cycle assessment Requirements and guidelines, which is an adoption without modification of the identically titled ISO (International Organization for Standardization) Standard 14044 (first edition, 2006-07-01).The ISO 14000 famil

37、y of Standards was developed by environmental experts from around the world, under the auspices of the International Organization for Standardization (ISO) Technical Committee 207.This Standard was reviewed for Canadian adoption by the CSA Technical Committee on Life Cycle Assessment, under the juri

38、sdiction of the Strategic Steering Committee on Business Management and Sustainability, and has been formally approved by the Technical Committee. This Standard has been approved as a National Standard of Canada by the Standards Council of Canada.December 2006 Canadian Standards Association 2006All

39、rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission ofthe publisher. ISO material is reprinted with permission. Where the words “this International Standard” appear in the text, they should be interpreted as “this National Standard of Ca

40、nada”.Inquiries regarding this National Standard of Canada should be addressed toCanadian Standards Association5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000www.csa.caTo purchase CSA Standards and related publications, visit CSAs Online Store at www.Sho

41、pCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.Reference numberISO 14044:2006(E)ISO 2006INTERNATIONAL STANDARD ISO14044First edition2006-07-01Environmental management Life cycle assessment Requirements and guidelines Management environnemental Analyse du cycle de vie Exigences et lignes di

42、rectrices ISO 14044:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing

43、. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be fou

44、nd in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the

45、 address given below. ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

46、 ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO 2006 All rights reservedCAN/CSA-ISO 14044:06ISO 14044:2006(E) ISO 2006 All rights reserved iiiContents

47、 Page Foreword iv Introduction v 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 1 4 Methodological framework for LCA 6 4.1 General requirements. 6 4.2 Goal and scope definition 7 4.3 Life cycle inventory analysis (LCI) 11 4.4 Life cycle impact assessment (LCIA) . 16 4.5 Life cycle i

48、nterpretation . 23 5 Reporting . 27 5.1 General requirements and considerations 27 5.2 Additional requirements and guidance for third-party reports 28 5.3 Further reporting requirements for comparative assertion intended to be disclosed to the public 30 6 Critical review 31 6.1 General. 31 6.2 Criti

49、cal review by internal or external expert. 31 6.3 Critical review by panel of interested parties 31 Annex A (informative) Examples of data collection sheets . 33 Annex B (informative) Examples of life cycle interpretation . 36 Bibliography . 46 CAN/CSA-ISO 14044:06ISO 14044:2006(E) iv ISO 2006 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried