CAN CSA-C358-2003 Energy consumption test methods for household electric ranges (Fourth Edition Update No 1 November 2003).pdf

《CAN CSA-C358-2003 Energy consumption test methods for household electric ranges (Fourth Edition Update No 1 November 2003).pdf》由会员分享，可在线阅读，更多相关《CAN CSA-C358-2003 Energy consumption test methods for household electric ranges (Fourth Edition Update No 1 November 2003).pdf（41页珍藏版）》请在麦多课文档分享上搜索。

1、C358-03(reaffirmed 2013)Energy consumption test methods for household electric rangesLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brin

2、gs together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.D

3、isclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability

4、, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicabl

5、e statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LI

6、MITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF

7、 THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any d

8、uty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance o

9、n the information contained in this document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual

10、property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrar

11、y), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws th

12、at protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this docume

13、nt.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity

14、 of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHIS

15、DOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ this remains thestandards development activities. To ensure the continuing responsibility of the accreditedintegrity of its certification process, the Association standards-development orga

16、nization.regularly and continually audits and inspects products Those who have a need to apply standards arethat bear the CSA Mark. encouraged to use National Standards of CanadaIn addition to its head office and laboratory complex whenever practicable. These standards are subject in Toronto, CSA ha

17、s regional branch offices in major to periodic review; therefore, users are cautioned centres across Canada and inspection and testing to obtain the latest edition from the organizationagencies in eight countries. Since 1919, the preparing the standard.Association has developed the necessary experti

18、se to The responsibility for approving National Standards meet its corporate mission: CSA is an independent of Canada rests with theservice organization whose mission is to provide an Standards Council of Canadaopen and effective forum for activities facilitating the 270 Albert Street, Suite 200exch

19、ange of goods and services through the use of Ottawa, Ontario, K1P 6N7standards, certification and related services to meet Canadanational and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6C

20、anadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-m

21、ark of Canadian Standards AssociationNational Standard of Canada(approved November 2003)CAN/CSA-C358-03Energy Consumption Test Methods forHousehold Electric RangesPrepared byApproved byStandards Council of CanadaPublished in February 2003 by Canadian Standards AssociationA not-for-profit private sec

22、tor organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.csa.caISBN 1-55397-091-8Technical Editor: Sam Loggia Canadian Standards Association 2003All rights reserved. No part of this publication may be reproduced in any

23、 form whatsoeverwithout the prior permission of the publisher.(Copyright page replaced November 2003)Standards Update ServiceC358-03February 2003Title: Energy consumption test methods for household electric rangesPagination: 29 pages (ix preliminary and 20 text), each dated February 2003To register

24、for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2013826.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy

25、 on privacy at csagroup.org/legal to find out how we protect your personal information.g32g32CSA Standard C358-03 Energy Consumption Test Methods for Household Electric Ranges Registered trade-mark of Canadian Standards Association Published in February 2003 by Canadian Standards Association A not-f

26、or-profit private sector organization 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6 1-800-463-6727 416-747-4044 Visit our Online Store at www.csa.ca g32 g32ISBN 1-55397-091-8 Technical Editor: Sam Loggia Canadian Standards Association 2003 All rights reserved. No part of this pu

27、blication may be reproduced in any form whatsoever without the prior permission of the publisher.g32Energy Consumption Test Methods for Canadian Standards Association Household Electric Ranges February 2003 iii Contents Technical Committee on Residential Equipment v Subcommittee on the Performance o

28、f Ranges vii Preface viii Foreword ix 1 Scope 1 2 Reference Publications and Definitions 1 2.1 Reference Publications 1 2.2 Definitions 2 3 Test Parameters 2 3.1 Test Room 2 3.1.1 Ambient Temperature Measurement and Control 2 3.1.2 Air Circulation 2 3.2 Instruments 3 3.2.1 Temperature Measurements 3

29、 3.2.2 Electrical Measurements 3 3.2.3 Time Measurements 3 3.3 Test Blocks 3 3.3.1 Construction 3 3.3.2 Readings 3 3.3.3 Initial Temperature 3 3.3.4 Thermocouple Installation 3 3.4 Power Supply 4 3.5 Preparation of Test Sample 4 3.5.1 Installation 4 3.5.2 Assembly 4 3.5.3 Clock 4 3.5.4 Time-Temperat

30、ure Controls 4 3.5.5 Electrical Connections 4 3.5.6 Conditioning 4 3.6 Calibration of Oven Temperature 4 3.6.1 General 4 3.6.2 Noncycling Thermostat 4 3.6.3 Cycling Thermostat 4 4 Procedure for Determining Energy Consumption Ovens 5 4.1 Equations 5 4.2 Test Methods for Energy Consumption Ovens 5 4.2

31、.1 General 5 4.2.2 Normal Bake 5 4.2.3 Forced Convection 6 4.2.4 Self-Cleaning 6 4.2.5 Clock Power Rating 6 4.3 Calculation of Test Energy Consumption Ovens 6 4.3.1 Single Ovens 6 4.3.2 Multiple Ovens 6 g32C358-03 Canadian Standards Association iv February 2003 4.4 Calculation of Energy Efficiency O

32、vens 6 4.4.1 Single Ovens 6 4.4.2 Multiple Ovens 7 4.5 Calculation of Annual Energy Consumption Ovens 7 4.5.1 General 7 4.5.2 Annual Oven Energy Consumption for Oven Cooking 7 4.5.3 Annual Self-Cleaning Energy Consumption 7 4.5.4 Annual Clock Energy Consumption 8 5 Procedure for Determining Energy C

33、onsumption Cooktops 8 5.1 Test Data 8 5.2 Test Methods for Energy Consumption Cooktops 8 5.2.1 General 8 5.2.2 Heating Elements 8 5.2.3 Test Block Size 8 5.3 Calculation of Test Energy Consumption Cooktops 8 5.3.1 Set-up 8 5.3.2 Energy Consumed 9 5.4 Calculation of Energy Efficiency Cooktops 9 5.4.1

34、 Single Heating Element 9 5.4.2 Total Cooktop 9 5.5 Calculation of Annual Energy Consumption Cooktops 9 6 Determining Total Energy Consumption and Range Efficiency 10 6.1 Calculation of Total Energy Consumption 10 6.2 Calculation of Range Cooking Efficiency 10 7 Usable Oven Space 10 8 Maximum Energy

35、 Consumption per Year 11 9 Sampling Plan 11 9.1 Sample Size 11 9.2 Measure of Energy Efficiency 11 9.3 Measure of Energy Consumption 11 Table 11 Figures 12 Annexes A (informative) Comparison of US and Canadian Definitions 14 B (informative) Annual Useful Cooking Energy Outputs of Ranges, Cooktops, a

36、nd Ovens 18 C (informative) Explanation of Sampling Plan 19 Energy Consumption Test Methods for Canadian Standards Association Household Electric Ranges February 2003 v Technical Committee on Residential Equipment L. Boutin Hydro-Qubec, Chair Mntal, Qubec E. Grzesik Ontario Ministry of Energy, Scien

37、ce Vice-Chair (b) provide an explanation of circumstances surrounding the actual field condition; and (c) be phrased where possible to permit a specific “yes” or “no” answer. Committee interpretations are processed in accordance with the CSA Directives and guidelines governing standardization and ar

38、e published in CSAs periodical Info Update, which is available on the CSA Web site at www.csa.ca. Energy Consumption Test Methods for Canadian Standards Association Household Electric Ranges February 2003 ix Foreword The Canadian Standards Association (CSA) develops standards under the name Canadian

39、 Standards Association, and provides certification and testing under the name CSA International. CSA International provides certification services for manufacturers who, under license from CSA, wish to use the appropriate registered CSA Marks on certain products of their manufacture to indicate conf

40、ormity with CSA Standards. CSA Certification for a number of products is provided in the interest of maintaining agreed-upon standards of quality, performance, interchangeability and/or safety, as appropriate. Where applicable, certification may form the basis for acceptance by inspection authoritie

41、s responsible for enforcement of regulations. Where feasible, programs will be developed for additional products for which certification is desired by producers, consumers, or other interests. In performing its functions in accordance with its objectives, CSA does not assume or undertake to discharg

42、e any responsibility of the manufacturer or any other party. The opinions and findings of the Association represent its professional judgement given with due consideration to the necessary limitations of practical operation and state of the art at the time the Standard is processed. Products in subs

43、tantial accord with this Standard but which exhibit a minor difference or a new feature may be deemed to meet the Standard providing the feature or difference is found acceptable utilizing appropriate CSA International Operating Procedures. Products that comply with this Standard shall not be certif

44、ied if they are found to have additional features which are inconsistent with the intent of this Standard. Products shall not be certifiable if they are discovered to contravene applicable laws or regulations. Testing techniques, test procedures, and instrumentation frequently must be prescribed by

45、CSA International in addition to the technical requirements contained in Standards of CSA. In addition to markings specified in the Standard, CSA International may require special cautions, markings, and instructions that are not specified by the Standard. Some tests required by CSA Standards may be

46、 inherently hazardous. The Association neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed, whether performed in whole or in part by the manufacturer or the Association, and whether or not any equipment, facility

47、, or personnel for or in connection with the test is furnished by the manufacturer or the Association. Manufacturers should note that, in the event of the failure of CSA International to resolve an issue arising from the interpretation of requirements, there is an appeal procedure: the complainant s

48、hould submit the matter, in writing, to the Secretary of the Canadian Standards Association. If this Standard is to be used in obtaining CSA Certification please remember, when making application for certification, to request all current Amendments, Bulletins, Notices, and Technical Information Letters that may be applicable and for which there may be a nominal charge. For such information or for further information concerning CSA Certification, please address your inquiry to Applications and Customer Service, CSA International, 178 Rexdale Boulevard, Toronto, Ontario